Driving Force Pro with GT3 problem

[siusiucheap]

I got a Driving Force Pro, when I play the GT3 and choose MT, how can I use that sequential stick shift to shift the gear?

 

[BreakerOhio]

Originally posted by siusiucheap
I got a Driving Force Pro, when I play the GT3 and choose manual, how can I use that sequential stick shift function?

Set your options to manual transmission and then go to the wheel option and reset the buttons to default.

 

[siusiucheap]

I reset the buttons to default already, but I only can use the Wheel mounted paddle shifter (L1 and R1) to shift, stick is not work for my GT3, any other way?

 

[BreakerOhio]

I think the buttons are mapped to l2 and r2... remap them for your wheel config.

If the upshift is set to R3 then try setting it to R2 and same goes for downshift. It should work with GT3

 

[siusiucheap]

I just tried, but the key config. doesn't allow you to chose L2, R2, L3, R3. It only allow you change to (L, R, X, Y, B, none). The default setting is L and R (equal to L1 and R1), can't assign the key buttons other than that. And also, I think the stick shift is not belongs to any L1, L2, L3, R1, R2, R3 etc, just like the Break pedal and Gas padel, it is individual.

 

[siusiucheap]

Anybody know?

 

[Famine]

I've never seen "Y" and "B" applied to PS2 controllers before...

As an FYI, the standard button configuration for most wheels has the accelerator pedal as "X" and the brake pedal as "square".

 

[LiNkiN]

mine had the stick set for gears without even setting it up , just make sure u are in manual mode and you are pushing the stick in the right direction .... on mine u have to pull towards you to up shift

 

[I3iggy]

on mine u have to pull towards you to up shift

thats the way sequentials work

 

[cubits]

Yep.

BTW, in the jaguar xkr (reality here), and other variant concept cars, the left paddle is shift up, and the right is down.. how weird is that!?!