Fanatec - General Discussion

  • Thread starter Thread starter PJTierney
  • 1,015 comments
  • 187,878 views
I installed the 1.5.1.2 FW on my DD+ going from 1.4.2.3 - I skipped the next 2 which had issues

I found the FFB improved after the +NM jump in 1.4.2.3 w a bit more feel w low/mid forces balanced against peak

I was slightly concered about potential thermal issues, but the next updates broke the button maps - those are now fixed for PBME w the latest

The app is still meh and kept trying to “fix” my wheel until it finally connected. FW installed ok

No disconnects in GT7 after a few hours of use so far - but only my experience - ymmv

the CSL DD/DD Pro update has the big overload shutdown issue but lowering FFB and/or FEI seems to help - still better to wait on that one
 
RS60NR
I installed the 1.5.1.2 FW on my DD+ going from 1.4.2.3 - I skipped the next 2 which had issues

I found the FFB improved after the +NM jump in 1.4.2.3 w a bit more feel w low/mid forces balanced against peak

I was slightly concered about potential thermal issues, but the next updates broke the button maps - those are now fixed for PBME w the latest

The app is still meh and kept trying to “fix” my wheel until it finally connected. FW installed ok

No disconnects in GT7 after a few hours of use so far - but only my experience - ymmv

the CSL DD/DD Pro update has the big overload shutdown issue but lowering FFB and/or FEI seems to help - still better to wait on that one
Click to expand...

Still feels as good as the previous firmware?
 
My biggest concern is if we have to update the base to work with the new pedals. I have a Podium DD1 that works flawlessly, but it's on an old (very old) software application - version 447. I do not want to flash the firmware on my DD1 and have it bricked. Scary time in the Fanatec ecosystem.
 
the latest Hotfix release 1.5.2.3 is out to fix the CSL DD/Pro shutdown issue w the stronger torque

also another try on fixing button module disconnects for the CS DD/+ which affects some people still - not mine though so haven’t bothered w this one


So far most are happier now, but the big issue is those using the H-shifter w GT7 are experiencing “stick drift” which is activating menus unintented

The workaround is switch to sequntial mode on the shifter before driving then switch back when in the car - fine in 2d but in VR does not solve the issue as this adjusts the hud settings

Read the known issues before upgrading
 
ants818
Well, that sucks! Was hoping to maybe get away with updating the driver but not the base firmware. I want the pedals but don't want to have to buy a new base to do so.
Click to expand...
If you are just on PC and connect the pedals directly using USB the new app should be enough - the base FW is needed when connecting the pedals to the base to support console use and the on wheel tuning features
 
RS60NR
If you are just on PC and connect the pedals directly using USB the new app should be enough - the base FW is needed when connecting the pedals to the base to support console use and the on wheel tuning features
Click to expand...
Unfortunately, I'm just on PS5. I'm waiting to see if they are going to get the PS5 chip in the new podium base.
 
ants818
Unfortunately, I'm just on PS5. I'm waiting to see if they are going to get the PS5 chip in the new podium base.
Click to expand...
Lots of complaints about FFB quality/detail for the PDD - sounds like months before that’s sorted but it will eventually

people w both say the DD+ is better atm and at 18nm I don’t really need more so personally not seeing a chipped PDD as compelling enough other than build quality maybe
 
RS60NR
Lots of complaints about FFB quality/detail for the PDD - sounds like months before that’s sorted but it will eventually

people w both say the DD+ is better atm and at 18nm I don’t really need more so personally not seeing a chipped PDD as compelling enough other than build quality maybe
Click to expand...
I wish I can get something truly quality from Fanatec: DD that is working and doesnt break, a wheel and pedals. And let me be expensive if it will work and not break. I need to rely on it
 
HoldenOn
I have the Fanatec app on pc already if I want to upgrade app to new version do I just do it through the app no need to uninstall anything first ?
Click to expand...

Lightsider74
Yes and no.
Click to expand...

The recommendation seems to always be delete/uninstall the previous app and all associated devices/files, then download/install the new version.
Yes, it is galactically annoying.
 
Last edited:
rsspyder21
The recommendation seems to always be delete/uninstall the previous app and all associated devices/files, then download/install the new version.
Yes, it is galactically annoying.
Click to expand...
Thanks rsspyder21 for your detailed reply it is much appreciated. Yeah that is annoying that we can’t do it through the app itself, maybe one day. Cheers
 
ants818
My biggest concern is if we have to update the base to work with the new pedals. I have a Podium DD1 that works flawlessly, but it's on an old (very old) software application - version 447. I do not want to flash the firmware on my DD1 and have it bricked. Scary time in the Fanatec ecosystem.
Click to expand...
Problems are overstated. You have to remember that countless customers update their software and firmware all the time with no issues at all. Remember that no-one is going onto Forums and mentioning how they just had their 100th successful app and firmware update - people only mention when things go wrong.

But if everything is working, just leave your base as it is and just update it when you have to - when you get the new pedals for example.
 
Lightpilgrim
Weren’t Fatanec planning to start selling Podium pedals today?
Click to expand...
They will be going live shortly.

To all of you planning to purchase, our "GTPLANET5" discount code should apply to these so you can get an additional 5% off.
 
Vule
Click to expand...

Just behind things I don’t like to do; which entails eating raw chicken, and doing an Iron Man dehydrated and on empty stomach - is listen to a sock-wearing esport player give yet another monotone review. But I sacked up, persevered, and got through it.

The only piece of information I found interesting is that Digit ordered more springs to get his optimal feel. I reckon I’ll do the same. But being that I mainly heel-toe, I’ll be waiting a few more months until the 3 pedal set comes out.

Now if a few of you would kindly jump on the $700 grenade and report back in this thread, it would be greatly appreciated!!!


IMG_7229.gif
 
Last edited:
The whole Fanatec Podium Pedals experience is truly annoying. First they announce both sets ready inQ1 2026, then inform of a delay and say the problem is carbon parts so they will first launch GT style, then they delay again and say they have a problem with the clutch pedal, so will release F1 style and Gt plates as a bonus. 7 min after they open sales, nothing can be purchased. Staying with Simnets. Awful experience. It will be 1 year of a delay. Pretty sure many problems for users too, hardware and software as usual.
 
Yard_Sale
sock-wearing esport player give yet another monotone review
Click to expand...
And since he's a Fanatec affiliate, it's not actually a review, more of a product demonstration.

Lightpilgrim
Staying with Simnets.
Click to expand...
The smarter choice, even if the Podiums were available and all was perfect in their world, for more than half the price, you cannot find a single flaw with the Simnets (if we exclude some cases of personal preference, visual or whatever).
 
Last edited:
Vule
And since he's a Fanatec affiliate, it's not actually a review, more of a product demonstration.


The smarter choice, even if the Podiums were available and all was perfect in their world, for more than half the price, you cannot find a single flaw with the Simnets (if we exclude some cases of personal preference, visual or whatever).
Click to expand...
It is not 50% more. Podium pedals with base plate is 900 eur
 

Latest Posts

Back