has anyone Carbon 3M wrapped their G27?

[LeadFootLiam]

I would like to wrap the spoke of the wheel on mine as well as the steel plate on the shifter mount.

If you have done it can you please tell me how to did it.

 

[ravey1981]

Yep

Its very easy, get yourself some carbon vinyl. Good quality stuff like 3M is best. Take the wheel off and remove centre piece. Cut a piece the shape of the area you want to cover with about an inch extra on each side. Stick it to the spokes. Then using a very sharp blade (i used a new stanley knife blade, a scalpel would do nicely) cut "slots" towards the spoke, then fold these strips around the back tightly. The narrower the strips you leave the better the job of following the curves will be... Be patient.

The OMP badge is just a horn push from a real wheel BTW, I removed the logitech badge and put this one in instead.

 

[LeadFootLiam]

Great man thanks for the tips! Great job on yours!