Logitech G29 - Shifter Mods/Improvements

  • Thread starter Coryd
  • 56 comments
  • 140,119 views
I just used scissors to cut some length off the bottom of the boot. No special tools needed. I haven't had any issues with the stitches coming loose.
I have 1 question, isn't the plastic part attached to the original boot? How did you remove it?
 
I removed it it with my hands. I just pulled it out.
Oh ok, I am about to buy a second hand g25 shifter, the knob and the leather is in mediocre condition but I have no problem fixing that. So the plastic part comes off without much effort, right? Also what tool did you use to cut holes on the boot?
 
Oh ok, I am about to buy a second hand g25 shifter, the knob and the leather is in mediocre condition but I have no problem fixing that. So the plastic part comes off without much effort, right? Also what tool did you use to cut holes on the boot?
I used a hole tongs but I think you can use a nail and a hammer to punch holes in it.
Btw. there are some cuts around the plastic boot, you have to do some cuts in the new boot too ^^
 
@Coryd
Hey there!
I installed the new shifter knob and boot but I can't really shift into the 1st, 3rd and 5th gear. It's not really locking like in the 2nd 4th and 6th.
When I try to shift in the 5th gear, it's jumping over in neutral. Not every time but very often.
I really hope you or somebody else can help me with this problem.
 
I'm not sure what the issue is. The shift knob and boot are all cosmetic, they don't touch or affect the shift mechanism itself.
 
Hey all, so I recently purchased a Logitech G29 with a Playseat Challenge and am LOVING it. This setup is a huge improvement over my old DFGT with Wheelstand Pro.

One thing that I was not super happy with though is the G29 shifter - although it makes gameplay much more fun over the paddle shifters, it just looks and feels kinda cheap. So far I have done two small things that have made a big difference: a new shift boot to replace the plasticky one that comes with it, and a new aluminum shift knob to add some weight and feel.

Original:

driving-force-shifter.png


New suede shift boot (black with red stitching to match the Playseat Challenge):
35428694075_307ebc7e20_c.jpg


New black aluminum shifter with accurate shift pattern:
35262213302_3f411178ed_c.jpg


34586731654_5f2d76b487_c.jpg


I also have the 3Drap shifter mod coming to add some resistance to the throw so it feels less like a toy - I will update after I install it. But I have to say, even with the new boot and shifter, it already feels much more real and like less of a toy. So much better!


Hey!

Almost two years in of your Playseat challenge/G29 combo how is it going?? still loving it?? anything broke?? still comfortable??
asking because I'm about to buy the same set up

Cheers!
 
Hey!

Almost two years in of your Playseat challenge/G29 combo how is it going?? still loving it?? anything broke?? still comfortable??
asking because I'm about to buy the same set up

Cheers!

Yep, still loving it and everything is still going strong. Haven't had any issues with anything breaking or falling apart. Definitely recommend the setup.
 
Yep, still loving it and everything is still going strong. Haven't had any issues with anything breaking or falling apart. Definitely recommend the setup.


Excellent!!! Thanks for the response!!!
I got the G29, ordering the chair!
 
@Coryd
Hey there!
I installed the new shifter knob and boot but I can't really shift into the 1st, 3rd and 5th gear. It's not really locking like in the 2nd 4th and 6th.
When I try to shift in the 5th gear, it's jumping over in neutral. Not every time but very often.
I really hope you or somebody else can help me with this problem.

What probably happened, is that you cut the boot too short. When you shift, it stops the stick because its stretched out. When installing you should always put the stick in 1st gear and cut the boot so it fits the length.
 
What probably happened, is that you cut the boot too short. When you shift, it stops the stick because its stretched out. When installing you should always put the stick in 1st gear and cut the boot so it fits the length.
Thanks for the reply but I think I almost cut it too long. Someday I will try to fix it lol.
 
Just modded mine. Thanks for the tips!!
 

Attachments

  • 7257260E-3BFF-48E4-A9DA-A974DA553A70.jpeg
    7257260E-3BFF-48E4-A9DA-A974DA553A70.jpeg
    43.8 KB · Views: 324
  • 08B5B6B4-3DDC-4A2A-9845-93109FBDBF26.jpeg
    08B5B6B4-3DDC-4A2A-9845-93109FBDBF26.jpeg
    37.7 KB · Views: 320
@Coryd

Looking great. Well done :-)

I have the same setup Playseat and Logitech G29, but dident buy a shifter yet. Been thinking about it for some time, just not sure wich route is best to go.

How did you attach the gearshifter to the playseat challenge ?
 
@Coryd

Looking great. Well done :-)

I have the same setup Playseat and Logitech G29, but dident buy a shifter yet. Been thinking about it for some time, just not sure wich route is best to go.

How did you attach the gearshifter to the playseat challenge ?


You have to buy an attachment for the Playseat. It costs 50€.
 
Yep, still loving it and everything is still going strong. Haven't had any issues with anything breaking or falling apart. Definitely recommend the setup.

This looks great so I decided to get the knob and the boot but I have a couple questions. First, do you know, in inches, roughly how much you trimmed the boot? Second, I would like to order the part from Italy but are the plastic parts the ones you have to grease a lot or the carbon or both (website is a bit confusing on this)? Also, they do have a new updated version 3 mod that they say is much better.

https://www.3drap.it/product/mod-cambio-v3-h-shifter-logitech-g25-g27-g29-g920-improved-feel/

I know you don't have any experience with this but would you buy this over your initial purchase if given the chance?

One more thing, they now have on Amazon what *looks* like the same adapter pieces but the only review on there the person says it is flimsy and doesn't fit. Not sure if that's correct or if they didn't know how to install it. Can you take a peek and tell me what you think?

https://www.amazon.com/dp/B07PFP1V6Z/?tag=gtplanet-20

Sorry for all the questions but I'd really like to get this right the first time. I really appreciate it!

I got the OpenWheeler racing chair/stand in red/black so I got the shifter knob in red too, lol.

https://www.amazon.com/dp/B00ORLVWNM/?tag=gtplanet-20

Do you think this is necessary? I didn't buy it because I've heard a lot of people like the way the pedal feels out of the box, others think it needs more resistance. I guess I'll just have to see for myself once I open all this stuff for Christmas (wife won't let me do anything with it before that).

https://www.amazon.com/dp/B07WHSHSLT/?tag=gtplanet-20

Thanks again!
 

Attachments

  • 61PofUUcjiL._SL1200_ (1).jpg
    61PofUUcjiL._SL1200_ (1).jpg
    37 KB · Views: 30
Grietzj3q8TeMeuxZ6WL_8efUXcjHv8ug0AI9rgZbmmLE2bVSA-UR2wipZ5a4na-lneeB4kW39H7hXqJicikHQLoMIafB9jMyREHLLJWgCS8J9eMDqleZ28akcQ3-z9NP4iJCg3ANSIfXubNFSjN7_4Rbq3HlX3V9e9QM6ZpctdtixYsc4_xOtJv6lnpB10B_lcMuaVzU6cW26gobWc93zhne13m043N9_Z9afdfRoFtnSq9jkmlslk1VdCkEoqIMbAZ_x4krQ58MvpqTOeW-z8P0E1GJ_zAD7ePyWx-OuWVpcug4P1bdimCOM7BFz5RTxrEkhZCjaT7M6ZdGaRUWtZN3RTG_LVp08gM3fGlesxVVemB7mLMLjwnVtb4npMF1ix7yr74GtT2LC-DiXZGHClGdzQMqM9w65i7s05vO47HOVSed4G2i83mCw4u-xJDRRkfhkzBR8JW5-_3ZkNLbPyj579zUgiZ75ZoWKhEjysdwtW8PeyjKJXfcbwNPu6VRwyQTqQ_RGhFqTUywIu9OaC1GxHDewHyIJIDghIWyMBJTFSlzO1jyJNkgyK-IlhZZ9yIJDSMaa9eRVqc4asqEhjlwMccr-9y6EYyLuEPwHBbIh7rg0xPT8D0sPyY0IVZnZex7agGaOSvCvTtpeb7N1Xhr9iCHhO3AEef_9_haMfisqrQo2TLOtsijTsE2IkfVv1-8dwWkjsaVf484YmsSdF3=w1551-h2004-no


And I bought this:

Hyk91Oas9hLWVshaCI3ydybM60eqOhxGLN2f-FsegbJ8Kpe6AqMyFY1y7mBxxV6xuIkuH6etO-E2E-5tfnxgIJA_1PQ53umfd8EFD5nACMbUh3-3cUAJBiCIXMtWomUcUjUBJMaG57nMRcDWEAGzYvCksaAs4QZ8XlmhLyJ1sztNDvjVYXt6P7b4q06U-IZN0PavuRqbP-P8kHpyOfMaoc0q4ZsQofW4Q1HfVyfwan9fwGAAC3KiE5dn6hRRBj96vYH_DKNwAWpYnwuhbq89uLXAORGq_4Rc_8Bh19BdAgPVr8Ia_eM5dU5-KqFU_4B2sqheXN4mFq2JiCqVJLuw2fEWXRs8Kx_dr_lb6zsBGy60igl-q8-H13-Wnm-Qyd3hj1S07YmA2jFZ2Jmsd3mZJi4U0zOUUV1g51H5ua1tV3mHEI9d-72zRKd3nVsgZYTs9QC00RTkxfisRKcZVPF4Jnmju66fWa29UwGfnJPtf3tinfEWcSq1NL4uA9OUStUkoWgE0eZyM3rSdx6V3UCIwKjaOG50UmFKl9fVumOoXNPtu5nRUTnfjcpwE3LQI07ormMMo8s-W3N45e4gmd-H1PIWCjj1X2YaIRjzQ5gjDg7jqOdCXRvSstEYlD4gFPTX12DTKZUU7MxwzCSNKioNoXSLjxK-dX9D6kNzJtBLaNtGbOMP_XoJoC8g14YvnzK_q2CO9mQgAkC7YN4Wz6hBdP9g=w1551-h2004-no


To improve the shift feel/force. Seemed like a significantly more robust/thought out design than the 3DRap stuff; and it was much cheaper.

https://www.customsimshop.com/product-page/logitech-h-pattern-improvement-mod




Took a few weeks to ship, but the installation was pretty easy and it won't disintegrate with use like the 3DRap one does.



https://www.amazon.com/gp/product/B08DRL75RW/?tag=gtplanet-20

That's the shift knob. One with red stitching doesn't seem to be available anymore.
 
Last edited:
The shift knob came with a couple plastic adapters. After removing the stock knob, I just slid the adapter onto the shifter and then screwed the new knob on. Easy peasy.

I was kinda worried that it would come lose with heavy use, but it's on there pretty tight - no issues.
 
Last edited:
The shift knob came with a couple plastic adapters. After removing the stock knob, I just slid the adapter onto the shifter and then screwed the new knob on. Easy peasy.

I was kinda worried that it would come lose with heavy use, but it's on there pretty tight - no issues.
i dont get how you screw the new one on
 
Grietzj3q8TeMeuxZ6WL_8efUXcjHv8ug0AI9rgZbmmLE2bVSA-UR2wipZ5a4na-lneeB4kW39H7hXqJicikHQLoMIafB9jMyREHLLJWgCS8J9eMDqleZ28akcQ3-z9NP4iJCg3ANSIfXubNFSjN7_4Rbq3HlX3V9e9QM6ZpctdtixYsc4_xOtJv6lnpB10B_lcMuaVzU6cW26gobWc93zhne13m043N9_Z9afdfRoFtnSq9jkmlslk1VdCkEoqIMbAZ_x4krQ58MvpqTOeW-z8P0E1GJ_zAD7ePyWx-OuWVpcug4P1bdimCOM7BFz5RTxrEkhZCjaT7M6ZdGaRUWtZN3RTG_LVp08gM3fGlesxVVemB7mLMLjwnVtb4npMF1ix7yr74GtT2LC-DiXZGHClGdzQMqM9w65i7s05vO47HOVSed4G2i83mCw4u-xJDRRkfhkzBR8JW5-_3ZkNLbPyj579zUgiZ75ZoWKhEjysdwtW8PeyjKJXfcbwNPu6VRwyQTqQ_RGhFqTUywIu9OaC1GxHDewHyIJIDghIWyMBJTFSlzO1jyJNkgyK-IlhZZ9yIJDSMaa9eRVqc4asqEhjlwMccr-9y6EYyLuEPwHBbIh7rg0xPT8D0sPyY0IVZnZex7agGaOSvCvTtpeb7N1Xhr9iCHhO3AEef_9_haMfisqrQo2TLOtsijTsE2IkfVv1-8dwWkjsaVf484YmsSdF3=w1551-h2004-no


And I bought this:

Hyk91Oas9hLWVshaCI3ydybM60eqOhxGLN2f-FsegbJ8Kpe6AqMyFY1y7mBxxV6xuIkuH6etO-E2E-5tfnxgIJA_1PQ53umfd8EFD5nACMbUh3-3cUAJBiCIXMtWomUcUjUBJMaG57nMRcDWEAGzYvCksaAs4QZ8XlmhLyJ1sztNDvjVYXt6P7b4q06U-IZN0PavuRqbP-P8kHpyOfMaoc0q4ZsQofW4Q1HfVyfwan9fwGAAC3KiE5dn6hRRBj96vYH_DKNwAWpYnwuhbq89uLXAORGq_4Rc_8Bh19BdAgPVr8Ia_eM5dU5-KqFU_4B2sqheXN4mFq2JiCqVJLuw2fEWXRs8Kx_dr_lb6zsBGy60igl-q8-H13-Wnm-Qyd3hj1S07YmA2jFZ2Jmsd3mZJi4U0zOUUV1g51H5ua1tV3mHEI9d-72zRKd3nVsgZYTs9QC00RTkxfisRKcZVPF4Jnmju66fWa29UwGfnJPtf3tinfEWcSq1NL4uA9OUStUkoWgE0eZyM3rSdx6V3UCIwKjaOG50UmFKl9fVumOoXNPtu5nRUTnfjcpwE3LQI07ormMMo8s-W3N45e4gmd-H1PIWCjj1X2YaIRjzQ5gjDg7jqOdCXRvSstEYlD4gFPTX12DTKZUU7MxwzCSNKioNoXSLjxK-dX9D6kNzJtBLaNtGbOMP_XoJoC8g14YvnzK_q2CO9mQgAkC7YN4Wz6hBdP9g=w1551-h2004-no


To improve the shift feel/force. Seemed like a significantly more robust/thought out design than the 3DRap stuff; and it was much cheaper.

https://www.customsimshop.com/product-page/logitech-h-pattern-improvement-mod




Took a few weeks to ship, but the installation was pretty easy and it won't disintegrate with use like the 3DRap one does.




That's the shift knob. One with red stitching doesn't seem to be available anymore.

What is your experience so far with the shift feel mod?
 
It's a pretty dramatic difference. Even with the meatier shift knob on there, to actually shift requires a fair bit of force and there's a lot more feel in the shifter itself when you do (compared to the mushy shift action that you could bump on accident before).
 
It's a pretty dramatic difference. Even with the meatier shift knob on there, to actually shift requires a fair bit of force and there's a lot more feel in the shifter itself when you do (compared to the mushy shift action that you could bump on accident before).
Thanks for your reply. And can you say anything about the durability as that seems to be an issue with the 3drap?
 
Here is mine, before and after. I installed a leather boot and a Ryanstar shift knob. I found both at Amazon! Works great!
 

Attachments

  • 837CEDFC-F9E0-48D3-9978-35D2BFBF9CB9.jpeg
    837CEDFC-F9E0-48D3-9978-35D2BFBF9CB9.jpeg
    160.8 KB · Views: 39
  • D5A97204-4C3F-4EF7-AF02-F44564B63DF5.jpeg
    D5A97204-4C3F-4EF7-AF02-F44564B63DF5.jpeg
    127.8 KB · Views: 38

Latest Posts

Back