Logitech RS50 | Settings and tips

  • Thread starter Thread starter tinker
  • 64 comments
  • 8,979 views
LOGI_Rich
Disconnect the USB cable from the PS5 and connect it to the PC. Make sure you choose PC mode on the OLED when your power the base on and it’ll show up in G HUB then, provided you’re running the latest version - 2025.8.

There’s no new firmware updates yet but there is one coming in the next release, which should be available for everyone by the start of December.
Click to expand...
Hallo, ich habe das jetzt mal versucht, bekomme keine Verbindung zwischen der Base und dem PC und G Hub
 
Which version of G HUB do you have installed and are you definitely choosing PC on the OLED screen when you power the base on?

Do you have the USB C connection in the base and the USB A connection at the other end of the cable connected to the PC? This might sound like an obvious question but I have experienced people trying to connect a USB A to A cable before, using the A ports on the base, which won’t work.

Finally, is it a windows PC or Mac?
 
Which version of G HUB do you have installed, and when you turn on the base, do you definitely select the PC on the OLED screen? I have set it up that way.

I have USB-C on the base and USB-A on the Windows PC.

Latest problem: Assetto Corsa Comp. recognizes the pedals but not the wheel, which means I can't steer.
 
Last edited:
I've already solved the problem with ACC. Just set compatibility to “Pro” on the base and it works. Thanks.
 
Last edited:
LOGI_Rich
Keep running it in PS4 mode - no need to turn it off before a race. Please let me know if you get any further issues and also if you don't :-)
Click to expand...
Had updated all firmware and in the middle of the race the vibration died. It's like I ended up driving a hovercraft that was floating. There was no sensation of the curbs or bumps in the road but the wheel was still stiff to turn (albeit smooooooth). This also happened in the middle of a race..
 

Latest Posts

Back