Mazda R100 1973

  • Thread starter Thread starter symo63
  • 2 comments
  • 2,236 views
Messages
1,110
Australia
VIC
Messages
theroy1963
Messages
symo63
upload_2014-1-21_11-8-8.jpeg
images
 
Engine: Two-rotor rotary engine (Wankel-licensed), aluminium rotor chambers, cast iron center and end plates
Bore x Stroke: Does not apply
Displacement: 984 cc
Max. Power @ rpm: 100 hp (75 kW) @ 7000 (SAE gross)
Max. Torque @ rpm: 125 N·m (92 lb·ft) @ 4000 (SAE gross)
Compression Ratio: 9.4: 1
Fuel feed: single Hitachi 4bbl-carburetor
Fuel tank capacity: 50 L (13.2 US gal; 11.0 imp gal)
Valvetrain: Does not apply
Cooling: Water
Gearbox: Fully synchronized 4-speed-manual with floor mounted lever control & rear wheel drive
Electrical system: 12 volt
Front suspension: MacPherson struts, coil springs, anti-roll bar
Rear suspension: Solid axle, semi-elliptical leaf springs
Brakes: Front discs (9.6 in), rear drums (7.9 x 13 in)
Steering: Recirculating ball steering
Body structure: Sheet steel, monocoque (unibody) construction
Dry weight: 913 kg (2,013 lb)
Track front/
rear: 1,200 mm (47 in) 1,190 mm (47 in)
Wheelbase: 2,260 mm (89 in)
Length: 3,830 mm (151 in)
Width: 1,480 mm (58 in)
Height: 1,345 mm (53.0 in)
Tyre/Tire sizes: 14 x 4.0“
Top speed (estimate): 177 km/h (110 mph)
0-60 mph (measured): 10.8 sec
Fuel Consumption (measured): 9.8 litres per 100 kilometres (29 mpg-imp; 24 mpg-US) − 14.7 litres per 100 kilometres (19.2 mpg-imp; 16.0 mpg-US)
Price (USA, MY 1971): $ 2.495

mhv_mazda_r100_01.jpg


mhv_mazda_r100_02.jpg
 

Latest Posts

Back