No...Just NO!!!!

  • Thread starter Thread starter leeislee
  • 99 comments
  • 7,215 views
I like stanced cars, but just like pretty much everything, there is a limit... and some of the pics here are obviously over that limit...
 
Oni camber has been around for like 30 years.
 
I apologise for the trauma you are about to witness:

 
I apologise for the trauma you are about to witness:

<a href="http://www.youtube.com/watch?v=bQptfdSCdhs">YouTube Link</a>

I saw the screen cap and new I'd regret looking at the video.
 
Stupid amounts of unsafe camber != stance.

People really get way to bent out of shape over how someone else modifies their car needs a new hobby or something. As I've said before we are all car people doing it for the same reason.

Although if I ever strike it rich I'm going to buy really desirable cars and modify them in ways that will make "purist fanboys'" heads pop off.
 
I like it up to a certain point. Anything over 5 degrees is way to much.
Because_Drift_Car_S13_10-900x598.jpg
This is just amazing.
tumblr_mf3yctt1J71rqqo1io1_500.jpg
There is a difference between having stance, and way to much camber. It is mostly the VIP style of cars having a lot more camber then needed. :yuck:
 
People saying they look good.....i'm honestly shocked!

Sounds like you need to meet more people, or consider the fact not everyone shares your taste :rolleyes:

Stance is fine for the most part, the oni-camber madness is nothing new, just the internet has made us more aware of it. Frankly, there are a lot of gorgeous cars over at Stance Works.
 
Give it as little attention as possible, it all be over in a few years.. :sick:
 
Furinkazen
I apologise for the trauma you are about to witness:

<a href="http://www.youtube.com/watch?v=bQptfdSCdhs">YouTube Link</a>

I am sorry but what in blank did I just just watch? And why does that have a million plus views.
Stupid stupid stupid.
 
Stupid amounts of unsafe camber != stance.

People really get way to bent out of shape over how someone else modifies their car needs a new hobby or something. As I've said before we are all car people doing it for the same reason.

Although if I ever strike it rich I'm going to buy really desirable cars and modify them in ways that will make "purist fanboys'" heads pop off.

This. And I like that plan. :lol:
 
I apologise for the trauma you are about to witness:



BosoZoku has been going as long as any other car scene, longer than the stance scene.

And because of its age it just got taken further and further till you get that.

Now the west has started copying some bits of it for other scenes.
 
BosoZoku has been going as long as any other car scene, longer than the stance scene.

Except for, you know, maybe the Hot Rod scene.
 
Give it as little attention as possible, it all be over in a few years.. :sick:

Seconded. By then the positive camber brigade will have discovered that people were doing it the other way round almost one hundred years ago...

2538420324_8eb1a35d48.jpg


8088141304_8e25f5723e.jpg


bentley-brooklands-630.jpg


Extreme negative camber coming your way in 2013...
 
WHY do people like this stuff? :yuck:
 
Positive camber looks cool to me, negative is the opposite! I don't like it. ONLY on race cars is it acceptable, good looking, (Or of any use for that matter).
 
Apparently this is from a forum...for the Kia Forte! :lol:

4141d1299617070-lets-see-negative-camber-tint.jpg


*rrrrrrrRRRRRRRRR* *POP!* *POP!* *POP!* *POP!*

EDIT: Relatively this is tame but still :indiff:
 
^That's a fairly tasteless body kit, especially with those rims.

I agree with the majority here, a bit of camber (positive or negative) looks good, but more than 2 or 3 degrees looks bad. I love a well stanced car, though.
 
I think, in tiny quantities, camber can be used effectively. If it's visibly noticable, then its obviously made for drifting, which I don't really care for.

Drifters, might say 'yes more than a little, but less than that' and I think, for a drift car, that's acceptable. Otherwise, using it on the road, as JC would say 'they should be shot'.
 
^That's a fairly tasteless body kit, especially with those rims.

I agree with the majority here, a bit of camber (positive or negative) looks good, but more than 2 or 3 degrees looks bad. I love a well stanced car, though.

Some racecars have easily more than 3 degrees though
volvo_c30_stcc_1.jpg
 
Dooblewasur
Apparently this is from a forum...for the Kia Forte! :lol:

*rrrrrrrRRRRRRRRR* *POP!* *POP!* *POP!* *POP!*

EDIT: Relatively this is tame but still :indiff:

Ruined it with those rims and side skirts.
 
Low cars can look good. But any camber other than vertical looks horrible in my opinion.

I think it would be safe to conclude from this comment that you're not very educated on the topic of modifying a car.

Practically every car nowadays comes with a bit of negative camber and it is widely known that having negative camber is an advantage for cornering (to a certain extent.) But since you only like cars with NO camber (0 degrees/vertical), I guess you only like cars with front and rear solid axles such as trucks and heavy construction equipment.

Here are some photos of various race cars with quite a bit of negative camber...

3.jpg


1311354567_autowp.ru_mitsubishi_lancer_wrc_15.jpg


imprezagdbjun603hp4wd8.jpg


WTAwrx.12113.jpg


JGTCS15-14.jpg


negcam.jpg



Give it as little attention as possible, it all be over in a few years.. :sick:

Are you talking about the VIP camber thing or negative camber in cars overall? If you mean the VIP camber thing than that's been around since the late 90s with slammed VIP cars having lots of negative camber. Then another sub-genre of it broke off with the whole crazy camber thing. Will probably be around for a while just like the VIP and Yanky Style cars.
 
Joey D
You'll need to blame Kia themselves then.

Well i guess so then. Well those rims god awful.
 
I would also like to mention, on those drift cars with crazy camber on the front wheels, it's not a "oh it's a drift cars, it's just another flashy thing they do for looks."

No, it's done for a reason.

For example (easily 7-10 degrees of negative camber):

5803244080_e607e35f5f_b.jpg


But during a drift:

_JEF0558-L.jpg


Full contact patch on the outside front wheel.

And you avoid this problem:

311130_453410314697695_1984915331_n.jpg


Screen+shot+2011-08-23+at+9.18.23+PM.png


Basically driving on the sidewall of the front tires with nearly no control over the front end.

 
Last edited:
Back