Recreating FIA GT3 cars

  • Thread starter Thread starter justin700
  • 38 comments
  • 6,241 views
Today will be will of testing.
I am to have them all balanced in line with current GT3 cars.

I should have a 458, Vantage, MP4-12C, Corvette, Viper.
 
Already gave a few tries...
First to say, most cars are kinda overpowered in GT6, for some real specs check some of the following:
http://gt3europe.com/cars.php
http://www.supercars.net/cars/4127.html (Callaway C6)
http://www.supercars.net/cars/6081.html (Nissan GT-R GT3)
http://www.drivesrt.com/racing/viper-gt3r (Viper)

So as said, I tried a few things and can say, with "real" spec a so formed Oreca Viper is way to strong and the Camaro SS Touring is also a bit too, but not that heavy, same at Ford GT LM Spec II Race Car - so may they need a bit more handicap than they got at "real" specs.
Was a bit suprised, the Z06 LM matches pretty well with the specs from the callaway Z06R (1272kg, 395bhp) compared to the GT3's we got...
May with some kind of good will, one of the GT2 BMWs could take place as Alpina B6...
 
ok gus I know this is recreating FIA GT3 cars but I came with with the Idea of making concept GT3 tunes for cars and so far I made 2.
Aventador
Racing hard suspension
Racing brakes
Stock transmission
Triple plate clutch kit
Carbon drive shaft
Custom LSD - all front tuning set to 5, all rear tuning set to 7,30,20
Torque distribution diff - torque split 10:90
Stock engine
Intake tuning
Sports exhaust
Exhaust manifold
Sports Calalytic converter
Stage 3 weight reduction
Window weight reduction
Carbon hood
Racing hard tires
Aero kit type A
Generic wing type A
Rims: Rays 57Ultimate
Power limiter set at 70.0%
Downforce set to 120 rear

Fairlady Z(z34) 08
Racing hard suspension
Racing brakes
Six Speed Transmission
Triple plate clutch kit
Carbon drive shaft
Customizable LSD: rear 10,40,20
Stage 3 Engine
Sport computer ecu
Semi Racing Exhaust
Exhaust manifold
Sports Calalytic converter
Supercharger
Stage 3 weight reduction
Window weigh reduction
Carbon hood
Racing hard tires
Aero kit type B
Flat Floor type A
Custom wing type B
Rims: 1inch up GT-Ab07
Downforce set at 20

Now I know this is not a recreation of any present GT3 cars but its just a concept so please don't give me flak for this it was just an idea I had. I just need people to test it out for me. I've tested these cars myself I think they're good candidates for GT3. The Aventador is a bit twitchy at times but manageable. The 370z is perfect in my opinion. Both tested and tuned on mount paramore and Nuburgring. Feed back is much appreciated :)
 
Blood*Specter
The R8's drive like a sack of S:censored:. you did well to rid yourself of it. I think the GT3 Audi handling is another PD error.
:banghead:
Click to expand...

Agreed. It makes you seriously question the credibility of PD's physics model. Very frustrating
 
Siren
ok gus I know this is recreating FIA GT3 cars but I came with with the Idea of making concept GT3 tunes for cars and so far I made 2.:)
Click to expand...

I have done similar in GT5. I found FIA GT information about rules cars specs you name it. I really like FIA GT and really wanted to come to GT and rule. (Just like I would like to see V-8 Supercars) I just never published because frankly I didn't think any gave a hoot.

I would never mock anyone's hard work. And you seem to have done plenty. :gtpflag:
I remember want to make the Ford GT and the Aston Martin cars. And in GT1 class, it would have been nice to see the C5/6/7 R cars.

I will try you concepts when I have a chance. The Lambo would be good if PD would allow you to dial out the front wheels completely and create a rear drive car out of them. The FIA GT3 uses the Lamborghini Gallardo.👍
 
Blood*Specter
I have done similar in GT5. I found FIA GT information about rules cars specs you name it. I really like FIA GT and really wanted to come to GT and rule. (Just like I would like to see V-8 Supercars) I just never published because frankly I didn't think any gave a hoot.

I would never mock anyone's hard work. And you seem to have done plenty. :gtpflag:
I remember want to make the Ford GT and the Aston Martin cars. And in GT1 class, it would have been nice to see the C5/6/7 R cars.

I will try you concepts when I have a chance. The Lambo would be good if PD would allow you to dial out the front wheels completely and create a rear drive car out of them. The FIA GT3 uses the Lamborghini Gallardo.👍
Click to expand...
wow I thought people wouldn't care either. I would love to hear your feedback when you get a chance. I spent ALOT of hours working on the 370z since it had such low power to begin with I needed it to get up to 500+hp, so I was constantly adding and removing parts. I've over 20 laps on both Nurb and Bathurst but I'm still working on the suspension (only springs though ). One thing I can tell you about the car, (while I was watching countless Blancpain endurance races) its comparable to the Porche 911 GT3. The way it moves and handles is very similar. By the way I like to check out some of your tunes if you don't mind posting.
 
Siren
wow I thought people wouldn't care either. I would love to hear your feedback when you get a chance. I spent ALOT of hours working on the 370z since it had such low power to begin with I needed it to get up to 500+hp, so I was constantly adding and removing parts. I've over 20 laps on both Nurb and Bathurst but I'm still working on the suspension (only springs though ). One thing I can tell you about the car, (while I was watching countless Blancpain endurance races) its comparable to the Porche 911 GT3. The way it moves and handles is very similar. By the way I like to check out some of your tunes if you don't mind posting.
Click to expand...

Go to the GT5 Tuning Forum and look for "My Request Replica" Thread. Those are some of the tunes that GT918 is going to bring over to GT6. They are not my GT3 experiments. Those are all in my GT5 garage.
But with GT5 tunes until PD fixes how it represents camber, just use 0.0 to 0.2 camber and -0.11 --0.15 front toe.
 
Blood*Specter
I remember want to make the Ford GT and the Aston Martin cars. And in GT1 class, it would have been nice to see the C5/6/7 R cars.
Click to expand...
The C7.R isn't a GT1 car. It's actually LMGTE spec. Oh, and also, a ZR1 LM with a 550bhp restriction could make a C6.R, and an R35 TC with the same amount of power as my aforementioned C6.R and 10:90 power distribution makes a GT1 spec GTR.
 
TheLuigi755
The C7.R isn't a GT1 car. It's actually LMGTE spec. Oh, and also, a ZR1 LM with a 550bhp restriction could make a C6.R, and an R35 TC with the same amount of power as my aforementioned C6.R and 10:90 power distribution makes a GT1 spec GTR.
Click to expand...

Thanks for the info Luig. Do you know what class the standard Goodwrench Corvette is? I had assumed it was an
FIA GT1 (C5.R) class car. I'm interested because I'd like to include it in my FIA GT rooms.;)

I've been using this web site (http://history.fiagt.com/cars.php) and the more current FIA site to check cars and specs. There was some talk of matching them against Super GT cars from Japan.👍

And I think I did create the FIA GT Spec ZR1 you speak of in GT5. Along with a Ford GT. :D

Here is the current site: http://www.fiagtseries.com/
 
Last edited:
Back