Show off your sim racing rig here!

11
Japan
Japan
Thefascinations
We're few dozens hours away from the launch of GT7. What's your setup like?
Here's mine:
GT1.jpeg
GT3.jpeg
GT2.jpeg
 
Great rig. How far over the main long edges of the rig does the 49'' overhang? The distance between the 2 red lines in my edit below of your picture. I might upgrade to a wraparound later this year and not sure if I should go for the G5 34'' or the G9 49''.

GT Wheel.jpg
 
Great rig. How far over the main long edges of the rig does the 49'' overhang? The distance between the 2 red lines in my edit below of your picture. I might upgrade to a wraparound later this year and not sure if I should go for the G5 34'' or the G9 49''.

View attachment 1130199
I would like ultrawide monitor to, but do you know you won't get full picture on console if use all screen (without black bars on sides)?
 
I would like ultrawide monitor to, but do you know you won't get full picture on console if use all screen (without black bars on sides)?
Yes, I do have a PS5 connected to it for GTS/GT7, but when you're that close even with the black bars, the visible part is still around 34" so not a huge problem, not as nice as ACC in Ultrawide on the PC though!
 
Great rig. How far over the main long edges of the rig does the 49'' overhang? The distance between the 2 red lines in my edit below of your picture. I might upgrade to a wraparound later this year and not sure if I should go for the G5 34'' or the G9 49''.

Hi - just had a quick measure - approx 30cm either side :)
 
I have not that much space in the "Gaming Room" so i try find a Solution where i can switch between Race and Flight Rig, on both i have installed small wheels so they interchangeable. Works nice so far.
The Flight Rig is a Monstertech Alu Frame Basis, the Race Rig is a Next Level Racing Basis
Race_001.jpg
Race_003.jpg
Race_004.jpg
wheels.jpg
Flight_003.jpg
Flight_001.jpg
 
Recently got back into sim racing with GT7. This is my first dedicated rig. The Next Level Racing F-GT with Thrustmaster T150 and T-LCM pedals. Probably about to pull the trigger on the monitor stand for the f-fgt. Just a little to far away from the monitor with the desk.
 

Attachments

  • 20220411_181627~2.jpg
    20220411_181627~2.jpg
    155.1 KB · Views: 68
I just started my rig the other day. I got the Logitech G29 and shifter. I use a Diwangus stand. I customized the shifter with a leather boot and Ryanstar shift knob :)
 

Attachments

  • 4BCB2496-7E47-4669-A9FC-6D2CB28C21B9.jpeg
    4BCB2496-7E47-4669-A9FC-6D2CB28C21B9.jpeg
    125.2 KB · Views: 32
  • A0F651C2-20C6-4806-B250-CDDB169AE235.jpeg
    A0F651C2-20C6-4806-B250-CDDB169AE235.jpeg
    195 KB · Views: 32
Here is my rig (excuse the clamp holding some glue together temporarily). Self built during lockdown in 2020 (originally with a T300 wheelbase and T3PA pedals I'd owned since 2017) as I could not buy any of the aluminium profile rigs I wanted due to the supply issues at the time. It is constructed primarily of 150x40mm timber painted and lacquered. Some joints are glued and screwed and others are bolted to give me options to reconfigure later if needed. The seat is a passenger seat from a 2014 Vauxhall SRi. My signature has other details about my setup.

1654000558343.jpeg
 
Last edited:
Some of y'all have some seriously impressive setups :drool::drool:

This is mine that I built a few weeks ago. Got it all dialed in to my liking now and it's absolutely spectacular 🤘 And yes I do plan to replace the styrofoam rug with a real one 😅

Setup consists of

Playstation 5 with Gran Turismo 7
TK Racing Pro Rig
TK Racing Pista Seat
Fanatec Gran Turismo DD Pro Wheel Base
Fanatec ClubSport Wheel Rim 320 Alcantara® with Universal Hub
Fanatec ClubSport Pedals V3
Fanatec ClubSport Shifter SQ V 1.5
Trak Racer Fanatec Wheel Mount
Sony 65" OLED A8F Television
Logitech THX 2.1 Sound System

1KPCDj9.jpg


6057NT9.jpg


jduY85X.jpg




Some video footage below ⬇

 
This was my setup with my shaped button box dash over my g920, that was before g920 did a poop.
Im in the process of builing the dual button box on left and right, so far the right is complete with 12 push buttons and hat control with enter button. The right holds 19 led switches and 4 push buttons awaiting the 2 zero dely usb control boards for this side.
The center holds a 10" Tablet.
 

Attachments

  • 20220823_161847.jpg
    20220823_161847.jpg
    201.9 KB · Views: 28
  • 20220823_162123.jpg
    20220823_162123.jpg
    271.1 KB · Views: 29
  • 20220919_115637.jpg
    20220919_115637.jpg
    223.1 KB · Views: 30
Back