- 661
need more people to play online....if you can find ppl with 50 or less ping lag is not bad....but i can play with ppl around 100 ping with little lag...but if u know how to drift LAG IS NOT A PROBLEM
I'll just make a short check list for xlink so that you ppl can get goin...This is what I check and have had success...
First and foremost....YOur computer that is running KAI must be HARDLINEd....they don't support wireless connections(i don't know y....)....though your ps2 can b wireless
1.First open KAI click the magnifying glass on the top...
2.Check to see if you are netreachable if no click the globe and wait then it will turn to yes move on....
3. Make sure your netcard is locked...if it isn't locked open up KAI config....you have to close kai inorder to acess the config program....Select your netcard in the pull down field....restart kai....your netcard should be locked.....
4. Go through the above steps and if everything is good click the folder icon....this checks to see if your ps2 configured in kai....if no consoles detected....IN GT4 go to multilan and connect....go to the Waiting for Connection screen and cancel...now your console should be detected and configured....IF config fails go through kai's forums and you should find a solution....
5. If all this is then go find a person to play with....make a room and check your lan settings in GT4. If you are hosting select host = yes and players to the number of players playing. SAVE and REBOOT your ps2. IF you are not hosting make sure your host is NO. OH yeah Traffic should be selected to light.
6. NOW go find someone to play with and open up a room in kai check to make sure you see PING with everyone...if not restart kai ...make sure everything is set up, then you should see everyones ping.
7.the HOST connects LAST... have people connect ONE BY ONE. The first person should go to the waiting for connection screen and inform the room that they are there...then the next person and so on till the host connects...
8. If all goes smoothly you should see track selection....if not....REboot PS2's everyone and try again...sometimes it takes a couple tries.
9. select track and car Promptly...If someone takes too long then the game freezes and you have to reconnect everyone again....well I hope this helps xlink noobs out there...ANd hope to see more TRUE drifters out there. I don't think i left anything out....I have always gone through this and have been able to play with no problems...DON"T try And connect without checkin ne of this stuff it is crucial for the connection....good luck ppl Drift it if you got it....If you dun got it....it will be noticable...btw lag makes drifitn easier....so don't complain bout it
I'll just make a short check list for xlink so that you ppl can get goin...This is what I check and have had success...
First and foremost....YOur computer that is running KAI must be HARDLINEd....they don't support wireless connections(i don't know y....)....though your ps2 can b wireless
1.First open KAI click the magnifying glass on the top...
2.Check to see if you are netreachable if no click the globe and wait then it will turn to yes move on....
3. Make sure your netcard is locked...if it isn't locked open up KAI config....you have to close kai inorder to acess the config program....Select your netcard in the pull down field....restart kai....your netcard should be locked.....
4. Go through the above steps and if everything is good click the folder icon....this checks to see if your ps2 configured in kai....if no consoles detected....IN GT4 go to multilan and connect....go to the Waiting for Connection screen and cancel...now your console should be detected and configured....IF config fails go through kai's forums and you should find a solution....
5. If all this is then go find a person to play with....make a room and check your lan settings in GT4. If you are hosting select host = yes and players to the number of players playing. SAVE and REBOOT your ps2. IF you are not hosting make sure your host is NO. OH yeah Traffic should be selected to light.
6. NOW go find someone to play with and open up a room in kai check to make sure you see PING with everyone...if not restart kai ...make sure everything is set up, then you should see everyones ping.
7.the HOST connects LAST... have people connect ONE BY ONE. The first person should go to the waiting for connection screen and inform the room that they are there...then the next person and so on till the host connects...
8. If all goes smoothly you should see track selection....if not....REboot PS2's everyone and try again...sometimes it takes a couple tries.
9. select track and car Promptly...If someone takes too long then the game freezes and you have to reconnect everyone again....well I hope this helps xlink noobs out there...ANd hope to see more TRUE drifters out there. I don't think i left anything out....I have always gone through this and have been able to play with no problems...DON"T try And connect without checkin ne of this stuff it is crucial for the connection....good luck ppl Drift it if you got it....If you dun got it....it will be noticable...btw lag makes drifitn easier....so don't complain bout it