Assetto Corsa in VRPC

[Cote Dazur]

Anyone can confirm they are seeing anything other then "INITIALISING PHYSICS SINGLE THREADED" in their log file?

LOGICAL CPU DETECTED: 4
INITIALISING PHYSICS THREAD POOL WITH 2 THREADS
Initialising threading with: 4 cores

 

[jac0]

LOGICAL CPU DETECTED: 4
INITIALISING PHYSICS THREAD POOL WITH 2 THREADS
Initialising threading with: 4 cores

thanks , so I know at least it is possible ... which CSP version r u using please?

 

[Cote Dazur]

thanks , so I know at least it is possible ... which CSP version r u using please?

0.2.3-preview211

 

[jac0]

@jac0 I do hope you are alright as I do not see you posting here anymore. I know you have problems with AC stutters and are using an Q3 + a link cable. I did today found this video, I do hope it can solve your AC stutter problems.

well I did try a usb-c ethernet adapter in my Quest3 and I was wrong about the "since i have a fast 6E wifi router , that ethernet device thingy will not improve much I reckon." .... it DOES improve alot !!

I now am able to enjoy almost stutter free driving , thanks to a 15 EURO device (i bought this one) !
O and I also recommand all to use "Riva Tuner Statistics Server" (RTSS) , to set a framelimit (not just in game and/or in VD)...
my 0.1% lows are almost 90fps as well when I use that!

To prove it is better , here a capture in CapframeX WITHOUT RTSS running:

and here WITH RTSS on:

 

[rich64]

Do any of you guys use the onhe openxr toolkit mod ? I've been using it and it really helps run AC and ACE in VR
I'll just post my settings just as an example and hopefully someone may get benefits from them

I've got a 9800x3d CPU and a RTX4090 GPU and am using a Pimax crystal lite

I set Pimax play to 85-90% render resolution and 90hz ( 72hz for ACE ) no smart smoothing .

Openxr settings,
Foveated rendering set to custom
Inner ring set to 40% ( full resolution) slightly flattened the ring .
Middle ring set to 1/4 resolution
Outer ring 85-90 % 1/16 resolution ( this is basically the edge of the "sweet spot" on the crystal lite which is blurry anyway )

Crop settings
100% left and right ( so no horizontal cropping)
65% crop on the top
95% crop on the bottom.

These settings work for me , even in AC EVO ,
Hope it gives someone a starting point to fine tune for them

Obviously the crystal lite is a wired display port connection so may not work for streaming headsets
Cheers

 

[Vintagedriver]

well I did try a usb-c ethernet adapter in my Quest3 and I was wrong about the "since i have a fast 6E wifi router , that ethernet device thingy will not improve much I reckon." .... it DOES improve alot !!

I now am able to enjoy almost stutter free driving , thanks to a 15 EURO device (i bought this one) !
O and I also recommand all to use "Riva Tuner Statistics Server" (RTSS) , to set a framelimit (not just in game and/or in VD)...
my 0.1% lows are almost 90fps as well when I use that!
View attachment 1531436

To prove it is better , here a capture in CapframeX WITHOUT RTSS running:
View attachment 1531437

and here WITH RTSS on:

View attachment 1531439

Link is not working on Amazon.nl app, could you please publish the brandname with typo, maybe a photo. Or if that is not possible pointing this out in the Tweakers.net price watch at https://tweakers.net/pricewatch/

 

[fleskebacon]

Do any of you guys use the onhe openxr toolkit mod ? I've been using it and it really helps run AC and ACE in VR
I'll just post my settings just as an example and hopefully someone may get benefits from them

I've got a 9800x3d CPU and a RTX4090 GPU and am using a Pimax crystal lite

I set Pimax play to 85-90% render resolution and 90hz ( 72hz for ACE ) no smart smoothing .

Openxr settings,
Foveated rendering set to custom
Inner ring set to 40% ( full resolution) slightly flattened the ring .
Middle ring set to 1/4 resolution
Outer ring 85-90 % 1/16 resolution ( this is basically the edge of the "sweet spot" on the crystal lite which is blurry anyway )

Crop settings
100% left and right ( so no horizontal cropping)
65% crop on the top
95% crop on the bottom.

These settings work for me , even in AC EVO ,
Hope it gives someone a starting point to fine tune for them

Obviously the crystal lite is a wired display port connection so may not work for streaming headsets
Cheers

Do you need all this for AC? I also run a Pimax Crystal Light and a 5080, which should be pretty similar to the 4090 in terms of performance, and I just use Quadviews in Pimax Play, and then run everything else pretty much maxed out at 90Hz and 100% resolution. If anything starts to bog, I enable a bit of upscaling.

But running Pimax Play at 100% resolution is essential - all scaling is better done with either AC or OpenXR toolkit.

And Pimax Quadviews is a very good way to boost performance. Much better, I think, than the FFR in OpenXR toolkit.

Also, using 72Hz is a nice trick for more slow paced games like ETS2, MSFS etc., but for AC, I think it's better to go for 90Hz with more upscaling instead.

 

[rich64]

Do you need all this for AC? I also run a Pimax Crystal Light and a 5080, which should be pretty similar to the 4090 in terms of performance, and I just use Quadviews in Pimax Play, and then run everything else pretty much maxed out at 90Hz and 100% resolution. If anything starts to bog, I enable a bit of upscaling.

But running Pimax Play at 100% resolution is essential - all scaling is better done with either AC or OpenXR toolkit.

And Pimax Quadviews is a very good way to boost performance. Much better, I think, than the FFR in OpenXR toolkit.

Also, using 72Hz is a nice trick for more slow paced games like ETS2, MSFS etc., but for AC, I think it's better to go for 90Hz with more upscaling instead.

As far as I'm aware AC1 doesn't support quad views , I thought it had to be supported in the game engine?
I only posted that message for anyone to try out if they are having issues.
I've tried the upscaling options but don't like the ghosting and trails
And like I said I use 90hz for AC1 and 72hz for ACE EVO
There's very little difference I can see between 90 and 100% render resolution and when using a 30 car grid of GT3 mod cars from RSS and URD it hammers my system some what so I drop down to 90% render resolution to help out

 

[jac0]

Link is not working on Amazon.nl app, could you please publish the brandname with typo, maybe a photo. Or if that is not possible pointing this out in the Tweakers.net price watch at https://tweakers.net/pricewatch/

USB-C Ethernet Adapter with PD60W Type C LAN to Gigabit RJ45 Ethernet Adapter 1Gbps (Thunderbolt 3/4) Compatible with Laptop, MacBook Pro/Air, Dell XPS, Chromebook, Surface
Brand: YUETUOL

amazon.nl

maar je kan bvb wss even goed gaan voor een ander merk zoals bvb UGREEN... let wel als je lange tijd wil gamen neem dan eentje met een power aansluiting! (want je hebt ze ook zonder, bvb niet deze )

 

[Cote Dazur]

Has anyone here tried that?

Looks amazing to have the hands act real.

 

[rich64]

Has anyone here tried that?

Looks amazing to have the hands act real.

Yeah I saw that video , looks cool but is the cut out to see your real hands and wheel just a 2d imagine?
Might look a bit odd if the rest of the car is 3d but your hands and wheel are 2d .
Cool idea tho