- 2,006
- Port Washington
- GTP_skeeter23
At the request of a PM I received I thought I'd post this here for everybody. I realize that there are some people who may be interested in e-cigarettes but don't know much about them. They range from mild to wild and everything in between. There is a perfect model for everyone out there unless of course you don't or never have smoked before
After years of searching for the perfect model (only because I started using them when the designs were very crude) the modern e-cig has eveloved enough that I have finally left the real cigarettes behind and am not bothered by it at all (unless I've had way too much to drink
)
Below is the setup I currently use and has served me VERY well. I chainsmoke this thing all day long at my desk and it just keeps going. It is quite a bit more advanced than the disposable units you would find in a gas station
as such it will also be MUCH cheaper to use and last far longer and work WAY better.
Breaking this down for people who may not know how they work or have never seen these before:
1. Obviously the assembled unit
2. E-Liquid. This is often referred to as "smoke juice" and is the tobacco replacement. It is made of either propylene glycol (NOT ethylene glycol like coolant!), or vegetable glycerine (or a mixture of both), flavoring, and niccotine if you chose. Niccotine levels are variable (0mg to about 24mg) and almost literally any flavor you can imagine (and some you can't). This morning I mixed a little esspresso into my Menthol
3. Coil base assembled unit. Replaceable/Rebuidable.
4. Coil Head. Replaceable/Rebuildable. The coild is what heats up the E-Lquid and converts it to water vapor that is the "smoke".
5. Assembled tank unit. As you can see at the bottom the coild unit and base are screwed onto the tank after it is filled with liquid.
6. Rechargeable battery.
I custom built this one from different parts that I considered to be the best I could find for what I like.
The coil and tank assembly are a Kanger T3S which cost about $8.00. Coil heads are replaceable for about $1.50 each or rebuildable for about $0.10 each if you're willing to do it.
The E-Liquid is a 10ml bottle of 11mg Menthol which cost about $5.00 and is probably the equivelant of 4-5 packs of cigarettes (20pk).
Batteries range greatly. The green battery pictured is a standard "eGo" 650mah battery that costs about $14.00. The stainless steel one is a variable voltage "eGo" battery that cost me about $18.00. Variable voltage can change the amount of vapor produced and to a lesser extent the flavor and strength of "feel".
A battery charger is about $6.00
So to sum it all up if you wanted to build the same as I have pictured it would cost approximately $33 +shipping (there are also premade starter kits for about the same) to start out. After that all you really need to buy for maintenence items are the E-Liquid and an occassional coil head (or rebuild it).
Below are some links to places I buy things. I am in no way affiliated with these companies and make no profit or receive compensation in any way or receive for providing these links or selling any product for them. I am posting them soley for informational purposes. If this goes against the AUP please remove or send me a message and I will do so.
House of Vapor E- Liquid or MadVapes E-Liquid
T3S Tank/Coil kits
eGo style batteries
Battery chargers
If anyone has questions let me know and I'll try to help as much as I can.
Below is the setup I currently use and has served me VERY well. I chainsmoke this thing all day long at my desk and it just keeps going. It is quite a bit more advanced than the disposable units you would find in a gas station
Breaking this down for people who may not know how they work or have never seen these before:
1. Obviously the assembled unit
2. E-Liquid. This is often referred to as "smoke juice" and is the tobacco replacement. It is made of either propylene glycol (NOT ethylene glycol like coolant!), or vegetable glycerine (or a mixture of both), flavoring, and niccotine if you chose. Niccotine levels are variable (0mg to about 24mg) and almost literally any flavor you can imagine (and some you can't). This morning I mixed a little esspresso into my Menthol
3. Coil base assembled unit. Replaceable/Rebuidable.
4. Coil Head. Replaceable/Rebuildable. The coild is what heats up the E-Lquid and converts it to water vapor that is the "smoke".
5. Assembled tank unit. As you can see at the bottom the coild unit and base are screwed onto the tank after it is filled with liquid.
6. Rechargeable battery.
I custom built this one from different parts that I considered to be the best I could find for what I like.
The coil and tank assembly are a Kanger T3S which cost about $8.00. Coil heads are replaceable for about $1.50 each or rebuildable for about $0.10 each if you're willing to do it.
The E-Liquid is a 10ml bottle of 11mg Menthol which cost about $5.00 and is probably the equivelant of 4-5 packs of cigarettes (20pk).
Batteries range greatly. The green battery pictured is a standard "eGo" 650mah battery that costs about $14.00. The stainless steel one is a variable voltage "eGo" battery that cost me about $18.00. Variable voltage can change the amount of vapor produced and to a lesser extent the flavor and strength of "feel".
A battery charger is about $6.00
So to sum it all up if you wanted to build the same as I have pictured it would cost approximately $33 +shipping (there are also premade starter kits for about the same) to start out. After that all you really need to buy for maintenence items are the E-Liquid and an occassional coil head (or rebuild it).
Below are some links to places I buy things. I am in no way affiliated with these companies and make no profit or receive compensation in any way or receive for providing these links or selling any product for them. I am posting them soley for informational purposes. If this goes against the AUP please remove or send me a message and I will do so.
House of Vapor E- Liquid or MadVapes E-Liquid
T3S Tank/Coil kits
eGo style batteries
Battery chargers
If anyone has questions let me know and I'll try to help as much as I can.