GT Sport SVG request thread (Please read 1st post)

  • Thread starter Thread starter daan
  • 10,545 comments
  • 784,068 views
Nuschel01
Is anyone able to recreate this one for me? I couldn't find a bigger sized image unfortunately :(

View attachment 744893

Thanks a lot in advance! :cheers:
Click to expand...
I found this pic. It could be done in the color scheme of your pic. Would you want to keep the red line through the S and the F?
racing-garage-sift-men-s-premium-t-shirt.jpg
 
Lebowski
I'm only about 2 thirds though the base design anyway. I expect at least another 4 hours work before I start adding sponsors etc! Hope to get a bit more done tonight.
Click to expand...
It would seem that the web address is a different font.

upload_2018-6-19_18-58-45.png
 
Lebowski
Im not sure if the racing.com is on the car im doing, just the JRM-GROUP.COM.

Might be useful to have the JRM-RACING.COM though if ever i choose to make variants of the same design.
Click to expand...
But wither it's group or racing, it's still a different font to the other JRM, and I don't know what font that is.

upload_2018-6-19_19-15-28.png
 
FA Racing
Can anyone pleaaaaaase make my gamertag for PS4 / GTS and upload. I've been a painter on Forza for many years, but does not have the software to create SVG files for GTS. Any font or art will be appreciated. My gamertag is >> Riptide065

Thanks in advance, will be much appreciated.
Click to expand...
Any of these do you?
 

Attachments

Elitekilla29
I'm trying to create this paint schemeView attachment 744614
And I need this (the best I can find) in order to create that scheme. View attachment 744615
Can someone please upload it to the game? With the hash tags as well so I can find it.
Click to expand...

I would really want to create this 2012 brad kesolowski scheme but I need the miller can. I would really appreciate it. Along with this Busch can please for this harvick scheme im trying to create as well.
cq5dam.web.1280.1280.jpeg
 
Last edited:
FA Racing
Can anyone pleaaaaaase make my gamertag for PS4 / GTS and upload. I've been a painter on Forza for many years, but does not have the software to create SVG files for GTS. Any font or art will be appreciated. My gamertag is >> Riptide065

Thanks in advance, will be much appreciated.
Click to expand...

daan
Any of these do you?
Click to expand...
Have your avatar too.
 

Attachments

daan
Have your avatar too.
Click to expand...

@ daan, Big thanks !!!, much appreciated. My gamertag you marked no.2 is looking great and the avatar. Please forgive my ignorance, but anywhere I can have a look how to get these files in game now ?

EDIT : Thanks daan, found the guidelines and uploaded. Big thanks again.
 
Last edited:
Hey, remember when I requested those stickers that looked like rounded rectangles with each class labeled within it? Like Gr.1, N300, Gr.X and so on? As a minor additional request, could I have one more sticker just like it, but with "ONE MAKE" within it? Basically, it'd look the same as the label seen towards the bottom of the screen right before a one-make Daily Race. I can't recall if there was a hyphen between the words in the label displayed in-game, either.
 
MatskiMonk
Well, there's 270 stations on the whole underground, if you did half of them you'd probably need to use about 30-40 svg files to get all those station names in alone (should get 70-80 characters in a 15kb file in that kind of font), although the map itself (lines and circles) might not be that big file wise.

I might draw up the bit inside the Circle and District lines later, see how big that'd be.
Click to expand...

@ashw92

So, I got started with this. My plan was to do a section of the map, without station names, until the file size reached 15kb... then create the station names in groups until I'd got all the station names for the area of the map I'd created..

This is what 14kb of the map looks like...

upload_2018-6-20_21-20-55.png


However... this is already getting an upload failure and I'm disinclined to try and figure out why. :banghead::ouch::irked:
 
JKcreativeworks
Probably detail problems because of the resolution? I cant think of anything else really.
Click to expand...

... I had it before making Graph Paper decals for my Frank Stella art car, and on other decals containing lots of lines with no fills. There's something the uploader doesn't like in the XML, but I'm not sure what.
 
MIE1992
Hey, remember when I requested those stickers that looked like rounded rectangles with each class labeled within it? Like Gr.1, N300, Gr.X and so on? As a minor additional request, could I have one more sticker just like it, but with "ONE MAKE" within it? Basically, it'd look the same as the label seen towards the bottom of the screen right before a one-make Daily Race. I can't recall if there was a hyphen between the words in the label displayed in-game, either.
Click to expand...
Did a bold and a normal.
onemake.png
 

Attachments

MatskiMonk
@ashw92

So, I got started with this. My plan was to do a section of the map, without station names, until the file size reached 15kb... then create the station names in groups until I'd got all the station names for the area of the map I'd created..

This is what 14kb of the map looks like...

View attachment 745334

However... this is already getting an upload failure and I'm disinclined to try and figure out why. :banghead::ouch::irked:
Click to expand...

Thanks so much for giving this a go, I really appreciate it. Totally understand if you don't want to invest any more time into trying to get it to upload. If so, would you mind chucking the SVG my way and I'll see if removing some of the lines such as the overground section I can get it a point where it will upload.

Thanks.
 
Morning all! First time posting as I've exhausted every avenue I can think of to find the last few remaining logos needed to finish my tribute liveries to Ginetta's two LMP1 entrants in this year's 24h of Le Mans. I've tried to do my homework to avoid annoying people by missing an obvious solution, and have managed to create most of what I need already. These last few have me totally stumped though. If anyone could point me in the direction of the correct logos, I'm ok making the svg's. The problem I've come across is that the team are backed by CEFC TRSM - a Chinese outfit - and many of the sponsors are Chinese.

Rear5

Rear5

  • Media owner bradledj
  • Date added
First up is the logo on the side of the rear wing, beneath the Gilclear logo. Looks like 'NJR' in stylised type?

Ginetta6

Ginetta6

  • Media owner bradledj
  • Date added
The two round logos to the left of the Ginetta logo on the side pod of #6.

Ginetta62

Ginetta62

  • Media owner bradledj
  • Date added
The Silon logo on the dorsal fin of #6 (I believe this may be a Chinese food/catering company from the ACO's official entry list).

Perrin

Perrin

  • Media owner bradledj
  • Date added
Electricite Perrin logo
The electricite Perrin logo from the side pod of the #5 car.

If you guys could help me out I'll be massively grateful! Judging by some of the previous work here, I'm hoping! Thanks! 👍
 
ashw92
Thanks so much for giving this a go, I really appreciate it. Totally understand if you don't want to invest any more time into trying to get it to upload. If so, would you mind chucking the SVG my way and I'll see if removing some of the lines such as the overground section I can get it a point where it will upload.

Thanks.
Click to expand...

I'll have another go tonight, I don't mind doing it at all - I've long been a fan of the design of the tube map and it's not that hard to draw... it's just so flippin' frustrating when the uploader spits it out for no good reason.

Edit:

IMG_20180621_210334.jpg

Getting there...
 
Last edited:
Good afternoon gents! Is it possible to get this logo converted to an svg file, and then some variation of the leaf by itself please? It's for a Spec Miata friend who was recently in a wreck and needs his car painted after it gets back from the body shop, therefore it's real life livery update time. I've got some mock up ideas I want to show him using the ND in the game.

Thanks so much!!!
 

Attachments

  • CLS logo.jpg
    CLS logo.jpg
    12.5 KB · Views: 18
SpecMiata-JSW
Good afternoon gents! Is it possible to get this logo converted to an svg file, and then some variation of the leaf by itself please? It's for a Spec Miata friend who was recently in a wreck and needs his car painted after it gets back from the body shop, therefore it's real life livery update time. I've got some mock up ideas I want to show him using the ND in the game.

Thanks so much!!!
Click to expand...

Try this buddy. 👍
 

Attachments

Latest Posts

Back