RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash

Discussion in 'GT6 Tuning' started by Ridox2JZGTE, Dec 22, 2013.

  1. MyogiWarrior34

    MyogiWarrior34

    Messages:
    123
    Location:
    Philippines
    I just like to point out something about the NOTES portion for authenticity's sake. Kei didn't choose to detune the Supra. He had the deal with Yamamoto to master the 800hp Monster Supra and beat the Z. After experiencing a gruesome defeat and the Supra dying, he sees himself unworthy to pilot it ever again and leaves it to the tuners to decide its fate.

    The tuners detuned it, gave it back to Kei and repainted it to Silver like that of his father's XX Celica, which made Kei break into tears. They said that 400hp is decent enough for C1 with Kei's skills.
     
    Ridox2JZGTE likes this.
  2. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    I should use your post for the notes :) Edited the tune notes, thanks again.
     
  3. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    NICKS FORZA FERRARI DINO 246 GT '71 ( Street / Track )

    Tuned to replicate Nicks Forza Ferrari Dino 246 GT Customer Car
    Comfort Soft / Sports Hard


    Nürburgring Nordschleife_13.jpg



    CAR : Ferrari Dino 246 GT '71
    Tire : Comfort Soft or Sports Hard


    Specs
    Horsepower: 251 HP at 6600 RPM
    Torque: 206.7 ft-lb at 6100 RPM
    Power Limiter at : 97%
    Weight: 1080 kg
    Ballast : 0 kg
    Ballast Position : 0
    Weight Distribution : 46 / 54 as stock
    Performance Points: 450


    GT AUTO
    Oil change
    Wheels : Standard Size - Stock
    Car Paint : Cafe Au Lait



    Tuning Parts Installed :
    Engine Tuning Stage 1
    Sports Computer
    Sports Exhaust
    Catalytic Converter Sports
    Intake Tuning
    Adjustable LSD
    Twin Plate Clutch
    Fully Customizable Suspension




    Suspension - NICKS FORZA FERRARI Custom Coilover ( Street )
    Front, Rear

    Ride Height: 115 115
    Spring Rate: 5.37 4.47
    Dampers (Compression): 7 4
    Dampers (Extension): 6 4
    Anti-Roll Bars: 6 5
    Camber Angle: 0.1 0.1
    Toe Angle: -0.08 0.17


    Suspension - NICKS FORZA FERRARI Custom Coilover ( Street ) -
    1.09 UPDATE

    Front, Rear

    Ride Height: 115 115
    Spring Rate: 5.37 4.47
    Dampers (Compression): 7 4
    Dampers (Extension): 6 8
    Anti-Roll Bars: 6 5
    Camber Angle: 1.0 1.0
    Toe Angle: -0.08 0.17

    Ferrari Alignment Range for Street / Track - HIGHLY Recommended to run with Track Pack Springs ( 7.73 / 6.44 ) - OLD Version collected from owners alignment.
    Camber Angle : 0.2 1.1 ( Camber Front Range : 0.16 +- 0.16, Camber Rear Range : 1.1 +- 1.4 )
    Toe Angle : 0.03 0.41 ( Toe In Front Range : 0.03 to 0.16, Toe In Rear range : 0.00 to 0.53 )


    Ferrari Alignment Range for Street / Track - HIGHLY Recommended to run with Track Pack Springs ( 7.73 / 6.44 ) - Based on Ferrari Manual and Service Bulletin
    Camber Angle : 0.0 1.2 ( Camber Front Range : 0.0 ( manual has positive camber range ), Camber Rear Range : -1.2 to -1.5 )
    Toe Angle : 0.03 0.24 ( Toe In Front Range : 0.00 to 0.24, Toe In Rear range : 0.00 to 0.24 - both 0 to 3mm toe in)


    Suspension - NICKS FORZA FERRARI Custom Coilover ( Track Pack ) -
    Ferrari Owners Alignment - Old

    Front, Rear

    Ride Height: 115 115
    Spring Rate: 7.73 6.44
    Dampers (Compression): 7 4
    Dampers (Extension): 6 8
    Anti-Roll Bars: 6 5
    Camber Angle: 0.2 1.1
    Toe Angle: 0.03 0.41

    Suspension - NICKS FORZA FERRARI Custom Coilover ( Track Pack ) -
    Ferrari Manual Factory / Service Bulletin Alignment

    Front, Rear

    Ride Height: 115 115
    Spring Rate: 7.73 6.44
    Dampers (Compression): 7 4
    Dampers (Extension): 6 8
    Anti-Roll Bars: 6 5
    Camber Angle: 0.0 1.2
    Toe Angle: 0.03 0.24

    For stiffer spring rate ( track pack ) use : front : 7.73 and rear 6.44 ( recommended for Nordschleife/Ascari/Willow Springs etc ) or front : 9.27 and rear 7.73 ( less bumpy track / High Speed Ring/ SSR5 / SSR7 / Tokyo etc)

    For even sharper handling, suitable for tarmac / dirt rally racing : front : 8.19 and rear : 10.65 ( care necessary as the car will be more responsive and wild )




    LSD - ZF 2 way high preload
    Initial Torque : 26
    Acceleration Sensitivity: 30
    Braking Sensitivity: 30

    Alternate LSD for looser handling-Highly RECOMMENDED
    LSD - ZF 2 way high preload
    Initial Torque : 26
    Acceleration Sensitivity: 26
    Braking Sensitivity: 26



    Brake Balance:
    7/5 ( personal BB) or for ABS 0 wheel : 7/5, for ABS 1 - feel free to use your preferred brake balance.


    Recommended setting for DS3 user :

    Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/5 brake balance as starting point.



    Notes :
    I made this replica to replicate a what if version of a Nicks Forza Ferrari customer car who wants to do track racing with a Dino 246. The base custom coilover has soft spring rate, yet provides ample improvement over stock Dino suspension. While the stiffer rates are meant for higher speeds of track racing and higher grip tires. The car was tuned and tested both at Tsukuba and Nordschleife.
    With 250+HP, the car is quick, agile and very rewarding to drive around the track :D


    UPDATE 1.09 : Added Ferrari Alignment Range, revised rear damper extension for more stable rear and better traction from mid to exit. Updated Camber on original setup to 1.0 all around. Added Alternate LSD with more freedom / loose, highly recommended for less experienced driver

    UPDATE 1.15 : Added new Ferrari Manual / Service Bulletin alignment, the old Ferrari alignment was based on reported Dino alignments range done by the owners. Corrected the owners alignment - old version rear toe in range, now it has zero to to 0.53 ( 0 to 6+mm total toe in ), 0.41 still used for toe in for the old version Ferrari alignment ( 5mm total toe in )
     
    Last edited: Feb 2, 2015
  4. Blood*Specter

    Blood*Specter

    Messages:
    907
    Location:
    United States
    RIDOX, thank you for your advice and tune for my Audi GT3 car. :tup:
    Although your tune was for the team phoenix car, it worked to calm down the Team Oreca Audi R8. The Oreca has more stock HP and weight than the phoenix.
    I did want to know if you think they are close enough to share the tune.:confused:
     
  5. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    You're welcome, and about the Oreca R8, I don't have the car, but I think it should work on all R8 LMS Ultra GT3 cars. I will have to buy the car and test the tune to know for sure :)
     
  6. Grifimus

    Grifimus

    Messages:
    36
    Location:
    United States
    Thanks, man
     
  7. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    You're welcome, look forward to hear how it drives :)
     
  8. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    80% Complete ... the 600HP Ferrari GTO :D, tuned on comfort soft, Italian Monster :)

    City of Arts and Sciences - Night_27.jpg
     
    Grifimus likes this.
  9. MyogiWarrior34

    MyogiWarrior34

    Messages:
    123
    Location:
    Philippines
    p.s. don't forget to paint it "WHITE". There are 2 known shades of White in GT6 that are named white (not crystal / scotial / super / etc.) One of them is from the GT-R N1s (R32/R33/R34), I can't seem to source out where the other "White" paint is from.
     
  10. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Yeah, I knew you would say that :D, I got an italian white paint : Bianco, same shade as White ( not sure where I got this, maybe from N1 Skyline ) At least Bianco is pure white, no yellowish shade and no bright shine :) Either white or bianco should do.
     
  11. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    TOYOTA MOTORSPORTS GmbH ( TMG ) 86 GT CS V3 Race Car ( GT86 CUP )

    Tuned to replicate GT86 TMG CS V3 Cup Car
    Sports Medium to Racing Hard


    Toyota-developpe-une-R3_articlethumbnail.jpg


    CAR : Toyota 86 'Racing' '13
    Tire : Sports Medium to Racing Hard ( Pirelli DH Slick 245/620 17 )


    Specs
    Horsepower: 227 HP at 7300 RPM
    Torque : 166.6 ft-lb at 6800 RPM
    Power Limiter at : 100%
    Weight: 1207 kg ( running weight )
    Ballast : 64 kg
    Ballast Position : -24
    Weight Distribution : 54 / 46 as the real car spec.
    Performance Points: 426

    GT AUTO
    Oil change ( Applied ) - OPTIONAL
    Improve Body Rigidity ( INSTALLED ) -MANDATORY - the real car has welded roll cage from factory.
    Wheels : Standard Size- OZ RACING Ultraleggera in grey or silver
    Car Paint : White

    Tuning Parts Installed :
    Racing Exhaust ( HJS Motorsports Type )
    Fully Customizable Suspension
    Racing Brakes Kit ( Project Mu Racing999 + Braided Lines )
    Weight Reduction Stage 1


    Suspension - OHLINS TTX36 2 Way Racing Coilover with Helper Springs
    ( Total Spring Rate DO NOT include Helper Springs Rate )
    Personal Setup

    Front, Rear

    Ride Height: 122 135
    Spring Rate: 13.00 16.00
    Dampers (Compression): 6 5
    Dampers (Extension): 6 5
    Anti-Roll Bars: 3 2
    Camber Angle: 3.4 1.4 ( TMG base setup max range - front 0 - 3.4 +- 0.75, rear 1.2 +- 0.75 - rear non adjustable )
    Toe Angle: -0.13 0.20 ( TMG base front toe out 2mm, rear toe in 3mm )


    Suspension - OHLINS TTX36 2 Way Racing Coilover with Helper Springs
    ( Total Spring Rate includes Helper Springs Rate )
    Alternative Setup

    Front, Rear

    Ride Height: 122 135
    Spring Rate: 15.68 18.68
    Dampers (Compression): 6 5
    Dampers (Extension): 6 5
    Anti-Roll Bars: 3 2
    Camber Angle: 3.4 1.4 ( TMG base setup max range - front 3.4 +- 0.75, rear 1.2 +- 0.75 - rear non adjustable )
    Toe Angle: -0.13 0.20 ( TMG base front toe out 2mm, rear toe in 3mm )

    ALTERNATE DAMPER+ARB-MORE COMPLIANT - Highly Recommended to Try This First
    ( Tested on CM to SM )
    Dampers (Compression): 2 3
    Dampers (Extension): 3 4
    Anti-Roll Bars: 2 1


    The Alternate Damper/ARB has been tested and works well with stiffer springs ( Total Spring Rate includes Helper Springs Rate ) on SS tires, example track Brands Hatch. Credit goes to @Thorin Cain




    325833.jpg

    DOG CLUTCH TRANSMISSION - FD20A 6 Speed Manual with 3.727 Final / Open Diff
    Factory TMG Delivered

    Install all power parts
    Set Default
    Set Final 4.100
    Set Auto Max Speed at 280kmh / 174mph
    Adjust each gear :
    1st 3.626
    2nd 2.188
    3rd 1.541
    4th 1.213
    5th 1.000
    6th 0.767
    Set Final 3.727 ( TMG Factory delivered 6 Speed with open diff and 3.727 Final )

    LSD - FD20A Open Differential ( Only for 3.727 )
    Initial Torque : 5
    Acceleration Sensitivity: 5
    Braking Sensitivity: 5

    TMG OPTIONAL 6 Speed FD20AT DYXAJ010005-00-A01
    Use stock GT86 Transmission with 4.100 Final and Stock LSD ( Torsen )

    Initial Torque : 50
    Acceleration Sensitivity: 80
    Braking Sensitivity: --


    Brake Balance:
    3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 - feel free to use your preferred brake balance. I would recommend to run just one click higher on rear brake.

    Recommended setting for DS3 user :

    Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.



    Notes :
    This is one of my hardest to make replica, I had to researched everywhere, magazines, forums, and technical docs. The real CS V3 has 200PS base engine in tech specs, but for racing use, it has FIA approved racing exhaust + catalyst and TMG Updated ECU. I decided to use only racing exhaust to get closer to the real car revlimit at 7450RPM. The tire is Pirelli DH slick, but in GT6, racing hard has too much grip, more like DM/DS slick, so I opted for sports medium ( similar to R comp semi slick ) or sports soft ( similar to DH slick IMO ) with optional to use racing hard.

    Suspension of the real car is Ohlins TTX36 2 way Racing coilover with main + helper springs. To adapt these springs, I combined both to one spring rate :) The real car uses 2 rear differential option, one stock open diff with 3.727 and torsen LSD with 4.100 ( GT6 stock LSD + gearbox came with this ), I have included both, use the 3.727 transmission setup with open diff LSD setup.
    Everything else are as close as possible to real car. Enjoy the drive :) This car will be great for spec endurance racing.

    The car in action IRL :





    UPDATE : Major update to the suspension, ARB has been tweaked, camber and toe alignment has been corrected, added optional spring rate setup ( there are differing opinion on helper springs being calculated into main spring rate - both are listed, one do not and another include helper spring rate in total value ), added both rear diff offered by TMG, FD20A ( open diff with 3.727 gear ) and FD20AT ( Torsen diff with 4.100 gear - came with stock GT86 in GT6 )

    UPDATE 1.15 : Fixed Toe values.

    UPDATE 1.22, October 2016 : Added Alternate Damper+ARB for better compliance, easier to drive on the limit, and highly recommended to try this first. Tested at Deep Forest and Nurburgring 24H on both CM and SM tires. Nicely balanced at Deep Forest even on CM.
    Added notes : Alternate Damper/ARB tested with stiffer springs, works well on SS tire.

    Enjoy the special 86 TMG Cup Car :p
     
    Last edited: Oct 27, 2016
  12. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Toyota Motorsports GmbH 86GT CS-R3 Rally Car

    Tuned to replicate TMG 86GT CS R3 Rally Car - based on CS V3 Cup
    Sports Medium / Dirt / Snow


    ku-xlarge.jpg



    CAR : Toyota 86GT '12 or Scion FR-S '12 or Subaru BRZ S '12
    Tire : Sports Medium / Dirt / Snow


    Specs
    Horsepower: 266 HP at 7600 RPM
    Torque: 187.1 ft-lb at 7100 RPM
    Power Limiter at : 100%
    Weight: 1080 kg
    Ballast : 35 kg
    Ballast Position : -36
    Weight Distribution : 54 / 46 - same as CS V3 86GT Cup Car it's based on.
    Performance Points: 456


    GT AUTO
    Oil change
    Wheels : Standard Size - any wheels. ( Dirt and Snow have preset wheel )
    Rear Wing : Custom Wing Type A
    Improve Body Rigidity ( INSTALLED ) -MANDATORY- as the rally spec will have welded rollcage and body reinforcement.
    Car Paint : White or any color.



    Tuning Parts Installed :
    Sports Computer
    Semi Racing Exhaust ( R3 spec requires silencer )
    Intake Tuning ( R3 spec allows intake manifold modification within certain limitation )
    Catalytic Converter Sports
    Adjustable LSD
    Twin Plate Clutch
    Weight Reduction Stage 3
    Fully Customizable Suspension
    Full Customizable Dog Clutch Transmission



    Suspension - OHLINS TTX44 Rally Spec Coilover Gr N derived
    Front, Rear

    Ride Height: 155 150
    Spring Rate: 6.50 8.00
    Dampers (Compression): 8 4
    Dampers (Extension): 7 4
    Anti-Roll Bars: 3 2 ( OPTIONAL 4 3 for tighter steering and better response )
    Camber Angle: 3.4 1.4 ( TMG base setup max range - front 3.4 +- 0.75, rear 1.2 +- 0.75 - rear non adjustable )
    Toe Angle: -0.13 0.20 ( TMG base front toe out 2mm, rear toe in 3mm )


    DOG CLUTCH TRANSMISSION - R3 spec sequential box with homologated stock gearing + rear diff ratio
    Set Default
    Set Auto Max Speed to 280kmh / 174mph
    Adjust each gear :
    1st 3.626
    2nd 2.188
    3rd 1.541
    4th 1.213
    5th 1.000
    6th 0.767
    Set Final Gear : 4.100


    LSD - 1.5 way high preload for rally
    Initial Torque : 48
    Acceleration Sensitivity: 30
    Braking Sensitivity: 10


    Aero
    Front : 0 ( Fixed )
    Rear : 20 ( Max )


    Brake Balance:
    7/8 ( personal BB) or for ABS 0 wheel : 6/7, for ABS 1 - feel free to use your preferred brake balance.


    Recommended setting for DS3 user :

    Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/8 brake balance as starting point.

    toyota_GT86_CS_-R3-rally_japan_gazoo_racing_5.jpg


    Notes :
    The real car is not yet released, but I already made a would be replica :lol: Okay, the TMG 86GT CS R3 rally car is for 2015 season. Based on CS V3 Cup success, TMG plan to enter the rally world with FR 86GT. With different R3 rules than VLN V3, the car has less weight, more power and upgraded with mechanical LSD, rally spec suspension, and sequential gearbox.

    The replica is WIP, meaning when the car actually released with additional infos, I will update the tune to reflect the new spec. In the mean time, this will do, built for tarmac, dirt and snow, the tune works for all surfaces, 3 sets of tires ( SM, Dirt and Snow ). The R3 replica tested and tuned at Toscana, Chamonix, Matterhorn, and Eiger Trail.

    Have fun sliding with 86 GT, the FR heaven :cheers:



    UPDATE : Added TMG Base Alignment in the suspension setup and revised ARB, original ARB value now OPTIONAL. Fixed toe value.
     
    Last edited: Jan 17, 2015
    GT6champNK_69 and danbojte like this.
  13. Grifimus

    Grifimus

    Messages:
    36
    Location:
    United States
    So...Cool...:eek:
     
  14. danbojte

    danbojte

    Messages:
    3,372
    Location:
    Romania
    Hi @Ridox2JZGTE ! When you say "Personal BB", it means you're driving with a wheel and ABS=0? ;)

    Don't tell to the dog but, I got the taste of ABS=0 driving. :)
     
    BadgerVadge likes this.
  15. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    I drive with stick and yes, no ABS :) The personal BB simply the BB that I used when driving the car, BB is rather personal, everyone have different driving style, different method of input ( stick, wheel of different brands ), so it's up to them to adjust BB to suit them best. That's why I never consider BB as part of the tune, while most tuner consider it part of the tune. Try the Nicks Forza Dino 246 GT with ABS=0, I am sure you will like it. Try lower BB first, say 5/3 then increase until you find a spot that you like, I recommend Tsukuba as a good place to fine tune BB ( last corner and 1st corner ) or Apricot Hill 1st corner :D
     
  16. danbojte

    danbojte

    Messages:
    3,372
    Location:
    Romania
    OK, thanks. I've already tried Nicks Forza Dino and I like it. :tup:
     
    Ridox2JZGTE likes this.
  17. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Last edited: Feb 6, 2014
  18. danbojte

    danbojte

    Messages:
    3,372
    Location:
    Romania
    Hi @Ridox2JZGTE !

    No LSD, Clutch & Flywheel, Propeller Shaft for Hi Tech?!
    No Carbon Propeller for the other two?!
     
  19. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    The Hi Tech 86 GT more than likely still uses stock LSD as it has only mild upgrade ( ECU, Exhaust and Coilover ) and for the drivetrain upgrades, I couldn't find confirming information that these cars have them, most tuner car with low power ( less than 300PS and non turbo ) uses heavy duty single plate clutch and non carbon drive shaft, not all of them uses twin plate / triple plate clutch or carbon drive shaft :) For the Turbo Amuse 86, it was a test project car for their turbo and single exhaust development ( Amuse uses Borg Warner supplied turbo ), so it was unlikely they will replace the driveshaft, the real turbo 86 was an auto too :D

    But if you want you are free to use them, it's just replica after all, treat them as a base tune of sort. I tried to get as close as possible to what the real car would be in terms of performance, but often data are limited. In real life, the owner of these cars could have done anything with their build to improve their creation, why can't we in GT6 :D
     
  20. danbojte

    danbojte

    Messages:
    3,372
    Location:
    Romania
    Oh, thanks! :) I just thought you've forgot to add them, but now I'm much happier seeing such exact you are. :tup:

    And no, if they aren't there I don't want them neither. :sly:
     
    Ridox2JZGTE likes this.
  21. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Lotus Europa Special '72 500PP
    Tuned for Comfort Soft to Sports Soft


    Gemasolar_45.jpg



    CAR : Lotus Europa Special '72
    Tire : Comfort Soft to Sports Soft


    Specs
    Horsepower: 215 HP at 7400 RPM
    Torque: 169.5 ft-lb at 6300 RPM
    Power Limiter at : 97.4%
    Weight: 649 kg
    Ballast : 0 kg
    Ballast Position : 0
    Weight Distribution : 46 / 54 as stock
    Performance Points: 500


    GT AUTO
    Oil change
    Wheels : +2 Inch Up - Classic Steel Smooth in Beige
    Car Paint : Goby Beige

    Gemasolar_47.jpg

    Tuning Parts Installed :
    Engine Tuning Stage 1
    Sports Computer
    Racing Exhaust
    Catalytic Converter Sports
    High RPM Turbo Kit
    Adjustable LSD
    Twin Plate Clutch
    5 Speed Transmission
    Fully Customizable Suspension
    Weight Reduction Stage 3
    Carbon Hood ( Body Color )
    Window Weight Reduction



    Suspension
    Front, Rear

    Ride Height: 90 100
    Spring Rate: 5.00 6.00
    Dampers (Compression): 4 3
    Dampers (Extension): 4 9
    Anti-Roll Bars: 6 3
    Camber Angle: 0.0 0.0
    Toe Angle: -0.08 0.23



    LSD - 2 way high preload
    Initial Torque : 30
    Acceleration Sensitivity: 18
    Braking Sensitivity: 30



    Brake Balance:
    8/8 ( personal BB) or for ABS 0 wheel : 7/7, for ABS 1 - feel free to use your preferred brake balance.


    Recommended setting for DS3 user :

    Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/8 brake balance as starting point.

    Gemasolar_48.jpg

    Notes :
    The tune was made back in 1.03, and some tweaking was made to make this car a bit easier to push and stable. Care still needed to avoid oversteer under heavy braking and trail braking. Never lift off the throttle completely when in later stage of braking, if you do, apply throttle immediately, don't be afraid, the car will regain traction. The tune is made for comfort soft, but works up to sports soft. Tuned and tested at Brands Hatch GP, able to lap easy consistent 1:43s on comfort soft
     
    Last edited: Feb 8, 2014
    Dietrich and GT6champNK_69 like this.
  22. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Currently working on so many cars - Ishida's Ferrari 288 GT0 is 99% done.
    Mine's R32 GTR : 90%
    GT 86 Rally Car is 50%, CS V3 Cup 90%.
    Zero Sports WRX '98 and '01 50%

    Will be starting on Eiji and Maki Kamiya Evo + Kishida S2000 - any tips on visual looks and power/weight figure ?


    Currently also starting on Tommy Kaira replica projects : M13, M30 ( R31, R32, R33, R34 GTRs ) :), TRD project : MR2 2000GT, Supra 3000GT, Chaser Sports X30
    TOM's project : T2020 MR2, T111 AE111 Levin Corolla, TOM's Supra RZ

    RUF BTR Type II :D

    ( not all of them might be done )

    These cars will be on secondary priority.
     
  23. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    I will be updating the Knight Sports for 1.04 ( drive it again ), there might be no changes at all :) or maybe I will fine tune damper and ARB. @danbojte : You might like this car and the Top Fuel Civic :D
     
  24. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    Yoshiaki Ishida Ferrari 288 GTO '84 Wangan Midnight 600HP

    Tuned to replicate Ishida's Ferrari Wangan Midnight
    Comfort Soft


    GTO.jpg



    CAR : Ferrari 288 GTO '84
    Tire : Comfort Soft


    Specs
    Horsepower: 600 HP at 7300 RPM
    Torque: 477.3 ft-lb at 5500 RPM
    Power Limiter at : 98.5%
    Weight: 1160 kg
    Ballast : 82 kg
    Ballast Position : 34
    Weight Distribution : 46 / 54 as stock
    Performance Points: 579


    GT AUTO
    Oil change
    Wheels : Stock or to get closer to Testarossa wheel in anime : +2 Inch UP- ENKEI RPF1 or RAYS 57Ultimate or RAYS RE30 in Silver
    Car Paint : Bianco or White



    Tuning Parts Installed :
    Sports Computer
    Sports Exhaust
    Isometric Exhaust Manifold
    Catalytic Converter Sports
    High RPM Turbo Kit
    Adjustable LSD
    Racing Brakes Kit
    Weight Reduction Stage 2
    Fully Customizable Suspension
    Full Customizable Dog Clutch Transmission



    Suspension - Custom Racing Coilover
    Front, Rear

    Ride Height: 85 95
    Spring Rate: 11.40 13.69
    Dampers (Compression): 6 3
    Dampers (Extension): 5 3
    Anti-Roll Bars: 4 3
    Camber Angle: 0.2 0.2
    Toe Angle: -0.08 0.17


    DOG CLUTCH TRANSMISSION - Corrected Stock gearing with lower final gear
    Set Default
    Set Auto Max Speed to 390kmh / 242mph
    Adjust each gear :
    1st 3.670
    2nd 2.280
    3rd 1.620
    4th 1.270
    5th 1.022
    Set Final Gear : 2.450


    LSD - 1.5 way high preload
    Initial Torque : 27
    Acceleration Sensitivity: 19
    Braking Sensitivity: 13



    Brake Balance:
    6/6 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 - feel free to use your preferred brake balance.


    Recommended setting for DS3 user :

    Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 6/6 brake balance as starting point.

    Brands Hatch Grand Prix Circuit_63.jpg


    Notes :
    Since we don't have Testarossa, I have to make do with 288 GTO for Yoshiaki Ishida car from Wangan Midnight :)

    The GTO has 600HP, 1160kg, with corrected weight distribution and 5 forward gear ratio, tuned on comfort soft, the car will do well on higher grip tires.

    The paint is Bianco, can't remember from which car, but the White is pure :), while the wheels stay stock - it's gorgeous.

    My tune goal is to make the car drivable on the streets at SSR7 and Bathurst while still be able to push hard on track. Spring and damper are optimized for all conditions, to give driver confidence in mid corner to exit. Lift off oversteer still prominent, but only when the car braked too deep and sudden ( late braking ) without any throttle input to compensate the weight thrown forward. Trail brake smoothly, ride the gas ( 10-20% throttle is enough ) a bit if feels unsure, she will trail around with grace :D

    LSD is optimized with high initial torque to reduce the handling changes, while medium acceleration to maintain balance and stability when on the gas, it's a compromise to avoid excessive understeer. While the braking is set as minimum possible without causing loose rear when braking. A 2 way LSD would be ideal, but might be to extreme on the streets ( wangan battle )

    Gearing while still using stock ratio is fine tuned to take advantage of the new power, the 4th gear able to reach close to 200mph or 320kmh and 5th for draft :) Launching from dead stop will need some revs so as not to bog down, aim at mid/high rpm range rev, precise throttle modulation necessary on lower gear ( 1st and 2nd ) - aim at 90% throttle.

    This is one of my favorite car, and with such power, she is a legend.
     
    Last edited: Feb 8, 2014
  25. danbojte

    danbojte

    Messages:
    3,372
    Location:
    Romania
    That's good but relax, don't rush, take it easy, step by step, enjoy the moment. :)

    Thank you! :tup:
     
  26. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660

    Just got detailed data on weight saving, power figure with exhaust upgrades and looking into ROM power increase, will update the replica soon with new weight and power figure :)


    amuse86.jpg

    Hi Tech ROM will most likely give 10-12HP at the flywheel, might not be far from 243HP :)

    Edit : Just made calculation, without ROM : 236PS or 215PS at the wheel, let's say ROM adds 9-10PS from base stock power 182PS at the wheel ( 5 % increase ) then we have 245PS - voila, it was spot on :) I will update the car without the ROM installed.

    Weight savings from exhaust, RECARO Carbon seats, rear interior, trunk etc = 50kg, which most are from rear part of the car, thus changing weight distribution to 54/46 :D

    REPLICA TUNE UPDATED :)

    The car is awesome fun at Streets of Willow.

    @danbojte : The car is now perfect ;) Main replica tune with Hi Tech ROM :) and the Knight Sports RX7 still drives like a dream, so no changes there.
     
    Last edited: Feb 8, 2014
    GT6champNK_69, danbojte and seb15000 like this.
  27. Firehound427

    Firehound427

    Messages:
    1,311
    I might be saying this a lot, but I can't wait to drive the Ishida Ferrari.

    Also, if you ever want to branch out into Initial D replicas, I am willing to search around for info. Or... I could set up an Initial D replica garage... :eek: :idea:
     
  28. KazaMR2

    KazaMR2

    Messages:
    1,304
    For Eiji and Maki their Fog lights are removed and they have a custom looking bodykit each, Eiji also has Volk TE37 bronze/white Im not sure if its bronze may be silver but its white in the wmmt video games, and for Maki he also uses TE37s and has 400bhp not sure if any weight reductions, but because he has a bodykit on i would use the Evolution 6 TM edition without the stripe down it. as for Eijis power/weight he has a first and second edition. while in Osaka he has 400bhp, then when in Tokyo he gets it upgraded to 450hp, again not sure on the weight but i hope i helped out :)
     
    Ridox2JZGTE likes this.
  29. Ridox2JZGTE

    Ridox2JZGTE

    Messages:
    11,660
    I posted the 600HP 288 GTO, the car is a beast, hope to hear from you guys, if the car is great to drive or not :lol:

    @pipntick, @RAZRr1275, @MyogiWarrior34, @OdeFinn, @sumbrownkid, @Tenacious D, @Golyadkin, @teth75, @stb155, @Firehound427, @Johnnypenso, @Saidur_Ali, @Kurei, @KazaMR2, @danbojte, @Grifimus
     
    Last edited: Feb 8, 2014
    KazaMR2 likes this.
  30. KazaMR2

    KazaMR2

    Messages:
    1,304
    [​IMG]

    The rims are BBS LM-R from this picture in the Anime ;)
     
    Last edited: Feb 8, 2014