It works remarkably well with the ****** sounds of GT6. And no, if you don't crank it up too much it does not bother the neighbors. With GT6 is more of a "feel the sound" feeling where as with PC sims and simvibe you feel the road.
Is it mega noisy ? like having the neighbours knock on your walls, kinda noisy ?
I guess so. Do you also increase the vibration of the BK to max and still it is weak? Try hooking up headphones or speakers to the output you are using for the BK and see how loud it is.Am I the only one needing to put volume very high in order to get some response from the BK?
Am I the only one needing to put volume very high in order to get some response from the BK?
Was wondering people's thoughts on one of these for GT6 ... Would like one of these if GT6 can run it .. ??!!!! Thanks ....
Have you tried using BKG2 with GT6? Because it works very well for me.No? Get it for movies use it for gt as a bonus GT6 has gash sounds
Are you using an amp? If so, does it have a crossover or low pass filter. If not, buy a subwoofer amp for it.
Buttkicker works off low frequency, similar to a subwoofer. If you are feeding full range into it, it will sound awful, and it will require high volume.
I've got 2 Earthquake minis and 2 Aura bass shakers on my rig. Also 2 subwoofers on the floor behind it.
Why not go directly from PS3 to BK amp?Snoopybg-> Yes: I do have it. The problem is that it requires a high volume level (on my Onkyo amp) before having the signal recieved (green led lighting when it gets a signal).
To be clear: I go from my Onkyo amplifier subwoofer OUT line to the BK amp IN line. Just as I should.
Why not go directly from PS3 to BK amp?
I use the HDMI to the screen and the old component connector to the BK amp. Enable dual output in the PS3 menu and you're good to go. Now you can regulate the volume of your audio independantly from your BK volume.
That old connetor that was also on a PS2 ... I don't know what it is called, but it splits out into three phono plugs. One yellow with video, one red with right audio and one white with left audio. I used one of the audio plugs and cut off the other two. I also shortened the audio channel I used, because I only needed 20cm between the BK amp and the PS3.