GT7 SVG request thread.

  • Thread starter daan
  • 4,793 comments
  • 293,391 views
Anywho, back again with some requests, first being the other Morris Lubricants banner:

1670102106270.png


After saving the logo here from the website, the black should be blue (3rd picture for colour reference - already exists in the showcase), however saving it and uploading it just brings white text and no background, either will do as I could get it down to 15.63kb, but no further despite dpi, pixel area size.


As per, thanks to anyone who can help.
More potential requests incoming, and hopefully some from the previous requests that didn't make it, can appear here too!

Edit: The inline picture uploads along the attachments bar, but doesn't upload as an attacment.
Random!
 

Attachments

  • Morris Lubricants banner.png
    Morris Lubricants banner.png
    5.5 KB · Views: 4
  • Morris sqaure.jpg
    Morris sqaure.jpg
    44 KB · Views: 4
Last edited:
Anywho, back again with some requests, first being the other Morris Lubricants banner:

View attachment 1213130

After saving the logo here from the website, the black should be blue (3rd picture for colour reference - already exists in the showcase), however saving it and uploading it just brings white text and no background, either will do as I could get it down to 15.63kb, but no further despite dpi, pixel area size.


As per, thanks to anyone who can help.
More potential requests incoming, and hopefully some from the previous requests that didn't make it, can appear here too!

Edit: The inline picture uploads along the attachments bar, but doesn't upload as an attacment.
Random!
 

Attachments

  • morris 2.svg
    9.9 KB · Views: 6
...Why Mr (or Mrs/Miss) Krisduv you speedy demon...

Thank you kindly!

Leaves me one major decal away from completing my 2nd project (did upload one here previously, but the newly discovered one I cannot find out what it is) which is the 'Walmsley Racing' one - which is gonna be had a go at courtesy of YouTuber GT Jesse, but again, should anyone feel free to have a crack at a slightly more text based decal, or just trying to crop a postcard version to create something, it'd be appreciated.

So challenge set to the skilled/talented with the right tools...

Thanks again!
 
Last edited:
Could I please have some license plates text made up in the correct UK license plate font/spacing? (Text only if that’s ok please, I’ll attach to plates I already have)

H654 JEL
S7 CCN
AML 1
RX55 FTZ
D112 VEV
911 HUL
H419 JPR
V8 EDF
KE02 EWW
V12 AMR
V12 AML
YL57 DUV
RD03 DJJ
YE55 XGU
YK68 ZHC
YA15 ODK
E1 CCN
G1 CCN
E449 ERB
E595 TKL
V874 ELN
 
Last edited:
Could I please have some license plates text made up in the correct UK license plate font/spacing? (Text only if that’s ok please, I’ll attach to plates I already have)

H654 JEL
S7 CCN
AML 1
RX55 FTZ
D112 VEV
911 HUL
H419 JPR
V8 EDF
KE02 EWW
V12 AMR
V12 AML
YL57 DUV
RD03 DJJ
YE55 XGU
YK68 ZHC
YA15 ODK
E1 CCN
G1 CCN
E449 ERB
E595 TKL
V874 ELN
See my post a few messages ago, there's a guide with numbers and letters on the decals available for ease of DIY application.
😁
 
Hey I’m on a phone, having trouble finding the post.. what date was it posted? I do some plates in game with fonts that I’ve downloaded but have trouble getting the digits all the same size, takes a lot of fiddling to get right. And then not always 100%. Thanks!

Also find it annoying in game I can’t create a decal/plate template and save it. I don’t have a PC, just a phone so I’m pretty limited.
 
Last edited:
Hey I’m on a phone, having trouble finding the post.. what date was it posted? I do some plates in game with fonts that I’ve downloaded but have trouble getting the digits all the same size, takes a lot of fiddling to get right. And then not always 100%. Thanks!

Also find it annoying in game I can’t create a decal/plate template and save it. I don’t have a PC, just a phone so I’m pretty limited.
If you use a guide decal and apply the first letter the size you want, you can duplicate that first letter multiple times and space across the plate. Then simply choose "replace decal" from the right hand side column to then get the effect you want with all decals the right size.
 
I had never thought of that! Will try and report back.

Any way to copy and paste from the rear plate to the front plate or visa versa?
 
If you use a guide decal and apply the first letter the size you want, you can duplicate that first letter multiple times and space across the plate. Then simply choose "replace decal" from the right hand side column to then get the effect you want with all decals the right size.
As Mugo said, replaced shifting is what I found easiest.
My post was only last night, so on the last page!
It can be done in-game, search the showcase for UK, see what's there!
 
Thanks, yes I have all the templates. I’ve found the method outlined by replacing the decals does just the trick! On some cars like the front of the Ferrari F430 some minor adjustments are required because of how the plate curves on the bumper. But it’s so much quicker now! If only there were a way to copy and paste the decals as it still is an annoyance to have to create the plate twice on every car!

Thanks to you both for the help!
 
I don’t know how to do all the shading but I made you a basic version of your logo.

Edit: I am a full grown adult and this makes me giggle, the font is a modified dubledik. Worse than my 11yo most of the time.
Thanks pal :-)
 
Thanks, yes I have all the templates. I’ve found the method outlined by replacing the decals does just the trick! On some cars like the front of the Ferrari F430 some minor adjustments are required because of how the plate curves on the bumper. But it’s so much quicker now! If only there were a way to copy and paste the decals as it still is an annoyance to have to create the plate twice on every car!

Thanks to you both for the help!
No worries, again - best practice is to duplicate and replace the current symbol, hold Square and use the D-pad to shift slowly and in a more controlled manner.
My RUF was a pain as the numberplate area is curved in 2 different directions!
...Figured it out eventually...

As far as doing it twice, try 'duplicate opposite', it may give you something on the other plate area as it's again likely to be in the 'other' body category location anywho.
 
Last edited:
Thanks to everyone that helped earlier.

I’ve made up some cars with plates (most are real) that you can feel free to use/edit or whatever you want.

Credit for most decals to PSN user Veurrulve

This should link to my gallery:

C591AF06-9637-4775-B3C9-E1EAE27E34D9.jpeg
5CABDEC4-3403-4926-B461-40924639F5EB.jpeg
 
Last edited:
I can't figure out how to keep the outlines on Illustrator.

Thanks!
 

Attachments

  • SealMaster1.png
    SealMaster1.png
    10.7 KB · Views: 4
  • SealMaster2.png
    SealMaster2.png
    6.8 KB · Views: 4
Hi, is anyone able to turn this sticker into an SVG? I've had a look and can see it in the game already or find a better image than this one shared by the excellent @krisduv. Ideally, I'm after the logo without any background.

Thanks in advance.

1670245559972.png
 

Attachments

  • sealmaster2.svg
    13.7 KB · Views: 5
  • sealmaster.svg
    13.4 KB · Views: 5
  • speedsyn 2.svg
    13.3 KB · Views: 4
Could you this Logos to 15kb please??? The Eurovision 2023 white word logo and the remain countries. Its for my project for the ESC 2023. Thanks.
 

Attachments

  • EuroServia.svg.png
    EuroServia.svg.png
    17.5 KB · Views: 4
  • EuroSan_Marino.svg.png
    EuroSan_Marino.svg.png
    17.8 KB · Views: 4
  • EuroPortugal.svg.png
    EuroPortugal.svg.png
    14.6 KB · Views: 5
  • EuroMoldova.svg.png
    EuroMoldova.svg.png
    10.7 KB · Views: 4
  • EuroMalta.svg.png
    EuroMalta.svg.png
    7.9 KB · Views: 4
  • EuroCroacia.svg.png
    EuroCroacia.svg.png
    14.6 KB · Views: 5
  • Eurovision-2023-Logo1.jpg
    Eurovision-2023-Logo1.jpg
    35.1 KB · Views: 5
...Me again...

...Casually pops into the forum...

...Leaves this here for the skilled/talented...

...Tried myself, got to 400kb, and then 300kb after finding out about SVGOMG number point thing (courtesy of YouTuber GT Jesse) - but still failed massively...

...Thanks again for any assistance from those who do...!

😁😁😁

I will have a look for a better quality logo, but if I can't find anything, this will do.
 

Attachments

  • download (1).jpeg
    download (1).jpeg
    12.6 KB · Views: 6
Last edited:
...Me again...

...Casually pops into the forum...

...Leaves this here for the skilled/talented...

...Tried myself, got to 400kb, and then 300kb after finding out about SVGOMG number point thing (courtesy of YouTuber GT Jesse) - but still failed massively...

...Thanks again for any assistance from those who do...!

😁😁😁

I will have a look for a better quality logo, but if I can't find anything, this will do.
Here is a cleaner image, but it lacks colour gradient and text (of which both would be grand!):
 

Attachments

  • 168853966_1037111583486340_289897942295030166_n-1024x768 (1).jpeg
    168853966_1037111583486340_289897942295030166_n-1024x768 (1).jpeg
    110.7 KB · Views: 5
Hi! Can someone convert or create this logo. Sorry for the bad quality pic, but it was the only one I found.
images.jpeg

The 565 was a Japanes racers' club from the 80s. Their logo is still present on some MCR's demo cars, but with golden numbers and black background. There is a GTR specialised shop named 565, I don't know if it's related or not to the club. Thank you in advance!
 
Hi! Can someone convert or create this logo. Sorry for the bad quality pic, but it was the only one I found.
View attachment 1214216
The 565 was a Japanes racers' club from the 80s. Their logo is still present on some MCR's demo cars, but with golden numbers and black background. There is a GTR specialised shop named 565, I don't know if it's related or not to the club. Thank you in advance!
Done here: https://www.gran-turismo.com/gb/gt7...ae-b03563a49bca/gallery/All/22236807437741055
 
Hello again,

can somebody fix this one for me

Wanacom logo

see attachments.

The Orange CO part is a square when i want to use it in game.


Also a small request.

Caps

caps-1_1607618482.png



Thanks.
 

Attachments

  • Wanacom.svg
    12.2 KB · Views: 5
Hello again,

can somebody fix this one for me

Wanacom logo

see attachments.

The Orange CO part is a square when i want to use it in game.


Also a small request.

Caps

caps-1_1607618482.png



Thanks.
 

Attachments

  • wanacom.svg
    9.3 KB · Views: 4
  • caps.svg
    10.6 KB · Views: 5
Hello! Even though photography is my hobby, design-wise I admit is one of my weak points. I want to create racing liveries with real-life local sponsors. For reasons, I can't make these logos below the 15kb limit. Can I ask for help from this forum in making these logos for use in GT? Thanks in advance for all the help you can give!


Liberty-Logo.pnglogo-meson.pnglogo-new-colors.pngLOGO-DOCTOR-MECANICO-2019.png
 
Last edited:
Hello! Even though photography is my hobby, design-wise I admit is one of my weak points. I want to create racing liveries with real-life local sponsors. For reasons, I can't make these logos below the 15kb limit. Can I ask for help from this forum in making these logos for use in GT? Thanks in advance for all the help you can give!


View attachment 1214353View attachment 1214354View attachment 1214355View attachment 1214356
Hi, if you're an iPhone user, Vectornator may be of some use, have a look at GT Jesse on YouTube for his recent mini tutorial look at that.
If not, I'm sure someone can work their magic and help you out!
 
Thanks in Advance! This is really great that you guys are putting SVG files together for us! Would someone please do this one?
MOESRACING.COM.png
 

Attachments

  • liberty.svg
    6.2 KB · Views: 6
  • meson.svg
    13 KB · Views: 5
  • automeca.svg
    14 KB · Views: 6
Back