GTPlanet Scale model thread

  • Thread starter Thread starter bondy_1625
  • 16,045 comments
  • 1,484,890 views
Robin
Just wondering, has anyone had any experience with ordering from ck-modelcars.de? Good packaging, models not damaged etc?
Click to expand...

Like others have said, I've ordered from them multiple times and I've never had an issue with anything, it was always well packed.
 
I thought I'd post this here too. I made a copy of my Autoart A-ha Racing GT3 Carrera Cup from the 2004 Asian Championship and put it into GT Sport.

Capture1.PNG


20180126214922.jpg


daan
I have an Autoart model of the 2004 Porsche Infineon Carrera Cup Asia winner. It is the Aha racing (Coffee, not Norwegian band) GT3 Cup as driven by Matthew Marsh.

View attachment 709467

View attachment 709474

View attachment 709469

The main issue is that most of the logos do not exist on the web for me to copy and vectorise, so I had to improvise. I took loads of photos of it and loaded them up into paint.net. I cut round the logos and used a combination of Vectoremagic and Inkscape to make them into vectors. I even managed to get a gradient fill in there which I was really chuffed about.

I think this is my favourite livery because of the amount of work that went into the logos.

View attachment 709470

View attachment 709471


View attachment 709472

View attachment 709473

https://www.gran-turismo.com/gb/gts...lery/all/livery/1567832/1/6989587798642688000
Click to expand...
 
MSZ
Check out GT Spirit's website, you can find all dealers' contact infos under the distributor section.
Click to expand...
Thanks.

Oh it's the guy I conversed with on eBay. I see.

I also forgot about modelcarscanada. I'm in the exact same city as them. Really dislike his website, prices and model selection though.


Can't say I find it easy to support these guys, seeing as how it's cost me more than it would be to buy it internationally, never mind the taxes.



Edit: On Ignition's official site, they are offering free shipping to China, Macau, Taiwan, and HK. They are offering 50% off shipping everywhere else, which I found out is $40USD.

Based off my shopping experience from eBayers in HK, an IG model can cost as low as $55 CAD for shipping, so I'm not buying into this "50% off" deal. I almost bit the bullet though.

Here's the link if anyone is curious. Prices are in USD.

https://ig-model.online/collections/1-18?page=1
 
Last edited:
The dude told me the reasons behind the high prices are due to exchange rates (He claimed GT Spirit only do business with them in USD)and taxes.

Later he added that CK is so damn huge (again the Walmart reference)that they buy a huge bulk of stock from GTS and Otto that's why they can keep the prices so low and their competition simply can't keep that up.
 
MSZ
The dude told me the reasons behind the high prices are due to exchange rates (He claimed GT Spirit only do business with them in USD)and taxes.

Later he added that CK is so damn huge (again the Walmart reference)that they buy a huge bulk of stock from GTS and Otto that's why they can keep the prices so low and their competition simply can't keep that up.
Click to expand...

Once a monopoly is established, it's difficult to beat them at their own game. I'm sure there's a way to counteract the effects, but I'm not adverse in the world of business to know how that's done. Maybe we'll just willingly pay the extra dollars to support them instead of CK? Sounds dumb, but I don't know what else works.
 
My brother overheard me wanting the Kyosho GS F. So he ended up getting me one as an early birthday gift from AmiAmi. Unfortunately, it arrived with the taillight cover off.
27356461_10215864761431326_2481667140188619061_o.jpg

27164841_10215864761911338_2233063676379386738_o.jpg

27368609_10215864762231346_8101804199957738010_o.jpg

Something I could probably fix if I was useful...

How good is Amiami with situations like this?
 
I want to bet on the fact it popped off due to the cold.

I sent a resin model to a neighbouring province in December and the guy reported many thin parts had broken off.

You can probably just glue that back with some clear cement. Just don't use superglue, no matter how tempting it will seem.
 
AOS-
I want to bet on the fact it popped off due to the cold.

I sent a resin model to a neighbouring province in December and the guy reported many thin parts had broken off.

You can probably just glue that back with some clear cement. Just don't use superglue, no matter how tempting it will seem.
Click to expand...

I'd imagine super glue would make a mess and ruin the model. Any specific brand I should look for?
 
Tamiya.

I have a bottle of Extra Thin Cement, but that may not be the best idea for this now that I think about it. Maybe a very small dab of something thicker and viscous than thin cement will be ideal.
 
Okay It's Nuremberg Toy Fair 2018 Day 1. I'm pulling photos from other forums. You're welcome in advanced:

27072739_2011263185755410_9222442585335222752_n.jpg


27337060_2011263199088742_5571976893084050292_n.jpg


27331552_2011263229088739_7822610906161081462_n.jpg






27500438_10156289012333338_7959777666635856582_o.jpg


27173899_10156289012793338_420665482890746966_o.jpg


27500976_10156289005658338_6364636780214225074_o.jpg


27174020_10156289005753338_5707960134232017200_o.jpg


27500769_10156289005638338_1348728583475985298_o.jpg



27336272_1622479427845948_5087681158407536808_n.jpg


27173196_10215622354620392_9030888405289727155_o.jpg


27355740_10215622353260358_8887540883727473476_o.jpg


27368629_10215622355260408_347717946305280741_o.jpg


27331773_1622479431179281_4903864752215092579_n.jpg


27173627_1837783562907462_3126636551128473518_o.jpg


27500152_1837783646240787_702884359703241514_o.jpg

27368954_1837763389576146_218840597222434494_o.jpg


27368441_1837763422909476_252455600075782555_o.jpg

27164690_1537708666307281_4928299201156227146_o.jpg

27173316_1882572131784835_5136476197054647840_o.jpg


27368275_1882572708451444_6436737033662920427_o.jpg


27164059_1882576215117760_2982057462265102425_o.jpg


27173999_1882621028446612_2776510121121842698_o.jpg


27368410_1882619605113421_5088695279312218140_o.jpg
 
I definitely want that plain 964 RSR, but I really wish they used the OEM wheels rather than those generic wheels they've used on many other models. They're not terrible, but they don't really look right and the color seems off.

poster.jpg


5e37f2440a9a78a73854caa39ca01e43.jpg
 
SPhilli911
I definitely want that plain 964 RSR, but I really wish they used the OEM wheels rather than those generic wheels they've used on many other models. They're not terrible, but they don't really look right and the color seems off.

poster.jpg


5e37f2440a9a78a73854caa39ca01e43.jpg
Click to expand...
Yeah I can see the difference after posting that photo now.

I can confirm it is a generic BBS-style whee they use on all their models. I had a 964 with the exact wheels. Oh well.



27624681_1801324173233437_8581447112761181826_o.jpg


27500454_1801324219900099_4538862822188553752_o.jpg


27625316_1801324213233433_2050088530525149579_o.jpg


27629127_1801324259900095_6868652880831695814_o.jpg


27709882_1801324339900087_5245817870432251810_o.jpg


Oh this is for real. Top Marques making Tom's Castrol Supra.
 
Is that the Castrol TOM's Supra? It looks more like the DENSO Sard Supra that raced at Le Mans.

In that case, one could get this, the TSM NSX and GT-R, and you'd have three of the most iconic Gran Turismo racing cars...
 
I don't know. It's worth noting that Top Marques has a record for getting features wrong.

I looked up 1995 Tom's Supra and found the following:

ebr43976_0.jpg

Product description: 1/43 Castrol Tom's Supra JGTC 1995 White
The wing and bonnet grills check out, but not the mirrors.

Toyota-build-0a.jpg

Some blogger cut & pasted some block of text from Tamiya's website, mentioning 1995.
Everything checks out (from what I can see).

Everything else I find is like the first example, all but the mirror location. You can see I am an academic with car history.
 
Those guys(TM, LS) never figured out how to get the proportion correctly on most of their models, that's why they hired a couple of guys from the DX forum to fix that up for the upcoming releases. Finger crossed...
 
Wow. A job opportunity from being a collector on a message board.... who'duv thought.


Anyway, I found another BC seller on ebay, goes by the name of YomaCarModel. Has his (I'm assuming it's a guy) own site where he has markdowns not seen on their eBay store. Prices otherwise are same throughout. Don't know if he does flat-rate, but I joined their mailing list. Selection is pretty decent; it's more up my alley than ToMo.


Edit: made a test transaction. 2 cars to my place is $28.xx, while adding a 3rd is $29.xx. Adding a 4th is $32.9x...... This was all done with GT-S/Otto models.
 
Last edited:
MedigoFlame
I'm considering picking up the Norev GT by Citroen. Pretty impressed with the one at the Boston Auto Show I went to, though they wanted $149 for it, when I'd see them on eBay for around $80. :crazy: Any experience with this model?
nv181610.jpg


Edit: Apparently my brother overheard me contemplating buying that Kyosho Lexus GS-F. So he decided to buy me one as an early birthday gift.
Click to expand...
Was going to reply to this post a while back, but forgot lol... But anyway, it is a pretty decent model, though not worth more than the $80 you see it for on ebay and such. Can't remember what I paid for my red one, but I think it was less than that.







Only the doors open, but the detail that is there is good. I did put metal brake disks on mine, since the stock plastic ones look... well, plastic.

Anyway a bunch of random pics:



















 

Latest Posts

Back