Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 146,830 comments
  • 43,702,945 views
carTOON
Guys, I've been thinking for a long time, is Trento Bondone really a Kunos job? Maybe they used a mod from an avid fan? It seems to me that it's much lower quality than any other track. They didn't even strive for similarity, fine details... :confused:

​
Click to expand...

That is something i always thought about. ALso because the road in game looks pretty narrow to me. Ok, is a road which is climbing the hill, but, i don't know, i think two cars will get stucked if one wil try to overtake the other. I also saw some photos from the '60s, when the hillclimb events were very important at that time, and the road, special in some places, doesn't looks like so narrow, but a little bit wider. And also lookind the road, isn't looking very well done. I don't know, looks almost like a crappy version converted from an old game.
 
CrisT86
Trento Bondone Hillclimb is a "conversion" from netKar Pro which was released by Kunos in 2006. That's why it looks like way older than AC itself.
Click to expand...
Oh yes? But have Kunos forgotten the just 1-click thing terrain smooting? At certain stages, it's almost amateurish, terribly hurtful...
 
Prato and Crema tracks (and others) that we have on AC came from netKar Pro too. They never cared about Trento-Bondone because in the beginning they never expected such results for AC, then, when AC gets his glory even more they forgot about it.

As Hillclimb fan i would have loved to see a "collab" between Kunos and FIA for a proper DLC with tracks and cars for the CEM (the European Hillclimb Championship but it never ever even taken in consideration unfortunately).
 
CrisT86
Prato and Crema tracks (and others) that we have on AC came from netKar Pro too. They never cared about Trento-Bondone because in the beginning they never expected such results for AC, then, when AC gets his glory even more they forgot about it.

As Hillclimb fan i would have loved to see a "collab" between Kunos and FIA for a proper DLC with tracks and cars for the CEM (the European Hillclimb Championship but it never ever even taken in consideration unfortunately).
Click to expand...
Brow, till today I have hope that someone would do Roßfeld or Ollon-Villars to AC. These places have a history as spectacular as many of the circuits we have out there.

But I don't have much faith in that. To do either of these RIGHT would be a ****ton of work.
 
Last edited by a moderator:
Another try... In fact, after many other try...
Still not really satisfied with sunsets but I hardly can do better.
(yes, I want a blinding sun when facing it)

Screenshot_ks_ferrari_250_gto_spa_24-5-123-21-18-40.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-19-19.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-19-35.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-20-26.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-20-39.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-21-1.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-21-18.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-24-17.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-24-53.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-25-7.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-25-29.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-26-2.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-26-15.jpgScreenshot_ks_ferrari_250_gto_spa_24-5-123-21-27-15.jpg
 
Fanapryde
I just installed it, still need to try, but I can already see that CM will not record max speed and driven distance.
You need to loose the capital letters in the file name: lamborghinisc24_arcd will do.
Click to expand...
@ARC DESIGNR

I lower-cased the folder name, kn5 files, and .bank filename in sfx, and updated all references in the GUIDs.txt.
CM records info as it should.

I like the way it drives, and it looks good.
I think the internal sound is too high and distinctly different from the external sound. Maybe needs some tweaking.
 
Last edited:
ApexVGear
@ARC DESIGNR

I lower-cased the folder name, kn5 files, and .bank filename in sfx, and updated all references in the GUIDs.txt.
CM records info as it should.

I like the way it drives, and it looks good.
I think the internal sound is too high and distinctly different from the external sound. Maybe needs some tweaking.
Click to expand...
Nice, but you could have saved you some time if you only did it for the file name 😉
That is enough.
I agree on the sound remark and while testing at LeMans (stock settings), the car is too slow imo. Lap times are roughly 10” slower than other LMDh cars.
 
hi everyone , some who uses "csp" on a problem with the inside view of the Ferrari 499P , do you have an idea of how to fix the problem? thank you! I would like to correct this before posting the V0.2a (which is ready!!)

Screenshot (13).png
 
Last edited:
Shokeus
hi everyone , some who uses "csp" on a problem with the inside view of the Ferrari 499P , do you have an idea of how to fix the problem? thank you! I would like to correct this before posting the V0.2a (which is ready!!)

View attachment 1267858
Click to expand...
If it's anything like the SD 499P, FSR V8 Hybrid or the MNBA e-tron :


[MESH_ADJUSTMENT_...]
ACTIVE = 1
MESHES = put the name here
IS_RENDERABLE = 0
IS_TRANSPARENT = 1
 
StoffelWaffle
If it's anything like the SD 499P, FSR V8 Hybrid or the MNBA e-tron :


[MESH_ADJUSTMENT_...]
ACTIVE = 1
MESHES = put the name here
IS_RENDERABLE = 0
IS_TRANSPARENT = 1
Click to expand...
Super thanks to you , I did this in "ext_config" I hope its will go because I can’t check (I don’t use csp so I don’t have this problem)

Capture d’écran (688).png
 
Smurth
Another try... In fact, after many other try...
Still not really satisfied with sunsets but I hardly can do better.
(yes, I want a blinding sun when facing it)
Click to expand...
go to pure config/ PP /PP adjustments / increase pp.godrays and you got blinding sun ifyou want (most cases it`s enough to increase it let`s say from 1 to 2.2.)
 
Last edited:
NivekBS
go to pure config/ PP /PP adjustments / increase pp.godrays and you got blinding sun ifyou want (most cases it`s enough to increase it let`s say from 1 to 2.2.)
Click to expand...
In fact, I'm working on my own weather mod, based on original x4fab's one.
I'm mainly focused on having a somewhat natural lightning and I'm almost satisfied with the result (some changes since the last screenshots)

The tricky point remains the sunset. It's really hard to produce a natural sun effect without ruining the scene with too much godrays...
 
Smurth
In fact, I'm working on my own weather mod, based on original x4fab's one.
I'm mainly focused on having a somewhat natural lightning and I'm almost satisfied with the result (some changes since the last screenshots)

The tricky point remains the sunset. It's really hard to produce a natural sun effect without ruining the scene with too much godrays...
Click to expand...
ah ok i`ve overlooked that :crazy:
 
Smurth
In fact, I'm working on my own weather mod, based on original x4fab's one.
I'm mainly focused on having a somewhat natural lightning and I'm almost satisfied with the result (some changes since the last screenshots)

The tricky point remains the sunset. It's really hard to produce a natural sun effect without ruining the scene with too much godrays...
Click to expand...
No possibility at all to adapt the godray's value depending on the position on the sun ? No idea how a PP filter works, honestly...
 
Shokeus
The v0.2a should be released today ... (last verification in progress)
Click to expand...
Just a first trial getting the wiper to work.
It´s only my second car I tried this, so for sure not perfect, but a first starting point. Put this in the end of your config:
Code: 
[MESH_ADJUSTMENT_...]
ACTIVE = 1
MESHES = Object-26, Object-27
IS_TRANSPARENT = 1

-----------------------------------------------------------------------------------------------------------------------------------------
; wipers

; wobbly wipers
[WIPERS]
WIND_THRESHOLDS_KMH = 120, 250 ; speed for wipers to start vibrating and for maximum vibration
WIND_AMPLITUDE_MULT = 1.75 ; multiplier for amplitude
WIND_FREQUENCY_MULT = 1.75 ; multiplier for frequency
WIND_OFFSET = 0.01 ; base animation

[ANIMATED_WIPER_...]
ANIMATION_OFFSET = 0.25
DEBUG = 0
MESHES = EXT_Wiper
UNDERLYING_SURFACE = Object-26
GROUP_0 = 'EXT_Wiper@A=*'
GROUP_0_ANGLE_FROM = -52
GROUP_0_ANGLE_TO = 52
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = 0.002215337, 0.8379682, 0.9851018
GROUP_0_PIVOT = -0.01867288, 0.5777404, 1.364407

[MESH_ADJUSTMENT_...]
MESHES = EXT_Wiper
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

And people with CSP and Rain FX will get this:
1687692900901.png
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
23 24 25
Replies
721
Views
138K
Beezer215
Beezer215
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
3K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
8K
OH1955
OH1955
Famine
Assetto Corsa Competizione Ultimate Edition Now Available on Steam
Replies
8
Views
8K
Apocalypse211
Apocalypse211
GTPNewsWire
Assetto Corsa Modder Creates Real Road Circuit Using Photogrammetry
Replies
16
Views
17K
Perico Lospa
Perico Lospa

Latest Posts

Back