Hi Forum and Happy New Year!
I have a question for you: I would like to edit wet tires by pattern.ini creating a personal .ini for extension file to fix this problem with some mods. Here I'm on RSS Formula 2013 and rain tires are very bad.
Any advice? Thanks
Here the original pattern strings into assettocorsa\extension\config\cars\common\tyre_patterns.ini
[TEMPLATE: TyresPattern_StyleRainF1 EXTENDS TyresPattern]
;
https://www.thecheckeredflag.co.uk/wp-content/uploads/2017/03/rsz_1783cb1d8710-2.jpg, on the right
@ = TyresPattern_Along, Pos = 0.16, Width = 0.01
@ = TyresPattern_Along, Pos = 0.25, Width = 0.01
@ = TyresPattern_Along, Pos = 0.35, Width = 0.02
@ = TyresPattern_Along, Pos = 0.69, Width = 0.01
@ = TyresPattern_Along, Pos = 0.78, Width = 0.01
@ = TyresPattern_Along, Pos = 0.87, Width = 0.01
@ = TyresPattern_Along, Pos = 0.1, Width = 0.015
@ = TyresPattern_Across, From = 0, To = 0.445, Frequency = 10, Thickness = 0.25
@ = TyresPattern_Across_Curve, Exp = 2, Offset = 0.15
@ = TyresPattern_Across_Thickness, TargetThickness = 0.1, From = 0.93, To = 0.935
@ = TyresPattern_Across, From = 1, To = 0.475, Frequency = 10, Thickness = 0.2
@ = TyresPattern_Across_Curve, Exp = 3, Offset = 0.1
@ = TyresPattern_Across_Curve, Exp = 1, Offset = 0.2, From = 0.6, To = 1
@ = TyresPattern_Across_Curve, Exp = 2, Offset = -0.05, From = 0.9, To = 1
@ = TyresPattern_Across_Curve, Exp = -2, Offset = 0.025, From = 0.6, To = 0.7
@ = TyresPattern_Across_Thickness, TargetThickness = 0.4, From = 0.99
@ = TyresPattern_Across_Thickness, TargetThickness = 1.5, From = 0.996
@ = TyresPattern_Bit, Frequency = "1, 10", P0 = "0.56, 0.2", P1 = "0.53, 0.8", Thickness = 0.005
@ = TyresPattern_Trim, MaxWidth = 0.3, TrimLeft = 0.23, TrimRight = 0.18
www.racedepartment.com
