Assetto Corsa PC Mods General DiscussionPC

[xavier_piers]

View attachment 1478612
Hello everyone Does anyone have working windshield wipers for this Pantera? I would be very grateful

This is not Pessio's Pantera right? Where can I find this one?

 

[rdking]

IMSA Mustang Challenge Car (I've been on the hunt for this kind of mod )
View attachment 1478687

https://www.patreon.com/posts/imsa-mustang-131769681

Did you know Frankie Muniz races this series? cuz I sure didn't

great series mod thanks for the heads up about it.
The cars good, but it's weird with it not having a tachometer.

 

[Jezza819]

great series mod thanks for the heads up about it.
The cars good, but it's weird with it not having a tachometer.

The steering feels notchy to me. When I was passing cars on track it seemed like some of the name logos were backwards on the AI cars. I'll have to look at that again the next time I drive them.

 

[RicME85]

This is not Pessio's Pantera right? Where can I find this one?

AC Legends GTL Classics by Bazza

Mod Hotfix to correct fuel usage We got a hotfix from Bazza. This Hotfix corrects the fuel usage of the Porsche 73, Porsche 74 and the Nissan: Needed DLCs Porsche Pack I pack is needed, because Kun…

thracing.de

 

[24H]

only have to create the ui_skin.json files......and maybe a simple driver suit

 

[MaxSTDTDesign]

Good Morning!

All the GT1 cars, released by our former Team Tomsim with latest updates.

• 1995 Corvette C4 ZR1 GT1
• 2010 Corvette C6R GT1
• 2010 Ford GT Matech GT1

https://www.patreon.com/posts/tomsim-gt1-pack-138857694?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link

 

[Subway666]

This is not Pessio's Pantera right? Where can I find this one?

This is an old mod car from AC Legends THRacing

 

[Ken134]

Yes they work, at least with the Corvette C8.R and the BMW M8. Didn´t look at the other cars though.

I think the Aston ones need to be redone if I remember right.

 

[Masscot]

You can try out this quickly created skin.
Just extract it into the tracks folder.

View attachment 1478907

Superb job @slider666, exactly what I was trying to achieve. Was it by manual manipulation of the textures or some semi-automatic filter I really should know about?

 

[Cote Dazur]

Thank you @MaxSTDTDesign for sharing those Gt1 cars.
Question to the this illustrious all knowledgeable group about anything Lemans related, looking at the 2010 Corvette C6R GT1, the interior is very different from the interior of the same named car from Legion. Why is that? Are they both correct?

 

[holden0335]

Maybe you abandoned it during practice or qualifying? You will not move to the next event if you don't abandon the actual race.

yes i know that but it's after the race

 

[LAFAYET47]

Thank you @MaxSTDTDesign for sharing those Gt1 cars.
Question to the this illustrious all knowledgeable group about anything Lemans related, looking at the 2010 Corvette C6R GT1, the interior is very different from the interior of the same named car from Legion. Why is that? Are they both correct?

I'm not aware that Legion made a C6.R GT1 Corvette, are you probably confusing it with his C5-R? Those are totally different cars.

 

[slider666]

Superb job @slider666, exactly what I was trying to achieve. Was it by manual manipulation of the textures or some semi-automatic filter I really should know about?

Thx @Masscot for the kind words.
Nope, I didn´t used any fancy semi-automatic filter in Photoshop nor any AI stuff.
I just did all by hand with Gimp 3.0.4.

 

[Disciple0707]

I'm not aware that Legion made a C6.R GT1 Corvette, are you probably confusing it with his C5-R? Those are totally different cars.

Legion made a Corvette C6 as well

 

[GT3Masters97]

Good Morning!
View attachment 1479038


All the GT1 cars, released by our former Team Tomsim with latest updates.

• 1995 Corvette C4 ZR1 GT1
• 2010 Corvette C6R GT1
• 2010 Ford GT Matech GT1

https://www.patreon.com/posts/tomsim-gt1-pack-138857694?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link

Nice pack! I also want to remember that chemflummi and I published the other version of the Matech GT1 some time ago (the one with the larger wing). For those interested in the other one, it's here (so you can have both )

94.77 MB file on MEGA

mega.nz

 

[Cote Dazur]

I'm not aware that Legion made a C6.R GT1 Corvette, are you probably confusing it with his C5-R? Those are totally different cars.

The one I have says C6.R and looks like a C6.R and author says Legion, that is what I am aware of.

 

[LAFAYET47]

The one I have says C6.R and looks like a C6.R and author says Legion, that is what I am aware of.

Link please? Might be one of those super old mods from Legion? Can´t find on his Drive.

 

[yavuzazgin]

Dear friends, the interior mirror of the car with the file name pkp_mclaren_765lt is not working. I couldn't fix it with my limited knowledge. Can anyone help?

 

[Pekkahe]

yes i know that but it's after the race

Did you wait that everybody crossed finish line?

 

[ninezeroniner]

I just used 89 restrictor setting for the Mercedes and the Calibra.
I'll play with it more in the next hour but looks already nice.
I avoid ballast when I can so AI doesn't have further reasons to mess up.

Mind you, cars pits at random times so...

Further tests: 94 to slow down the Mercedes and the Calibra

 

[Thockard]

Talking about AI, i 've seen in the CSP options the ability to write AI scripts. I suppose it's mainly for trafic but it seems to allow to use either multiple ai fastlanes (in a convoluted way where you enter each coordinate by hand, which sounds absolutly bonkers), as well as writing behaviors for AI cars (defense, attack, cruise...).

Couldn't find any ressource still, anyone working on this is keeping their cards close. Lately i became better with lua writing, so its on my to-try-list, but if anyone here already has given it a shot i'd be happy to jump on the project.

Hi @Tetri ,

Could you tell me where you found this information about AI scripts? Which version of CSP is intended to enable AI scripting? I’m interested in this functionality if it is really implemented.

Still about AI, i've been looking for a solution to create multiple layouts for multiple ai splines (therefore one layout per ai fastlane and hints).
It worked once with a kunos track, then it failed miserably on my Dundrod attempt.

This would be insanely more easy to switch between ai lines. Skins doesn't allow new ai and data folders, but layouts seem to be a solution. Would be great to keep original ai, switch to your own gt3 one from the race menu, then maybe have a dedicated one for 60s formula ones or 50s oddities that shouldn't run at half the speed of sound. If anyone is familiar here with a simple trick to add latouts (rather than the manual models.ini moves and other shennanigans in json files) i'm hoping for some help. I've made a few AI fastlanes for multiple tracks that work good with some cars and not that great with faster ones. Meaning each time i want to use my ai lines i have to reedit the ai and data folders. It's a crappy system, and i believe with all the ai fixes available, being able to switch from the race menu between ai splines would be warmly welcomed.

I tend to agree with you, but I ‘d go further because from my point of view, as Fastlane depends heavily of the car type and physics, the ideal solution would lead to allow users to link a car to an ai file before loading the track.

 

[Thockard]

Does anyone know of any fixes for ASR's F399? It seems way too slippery for the AI, meaning most of them just spin out.

Hi @Carpocalypse, I don't know if some fixes have been made, but if you want to modify it, the best thing to do is :
1 - unpack datas in CM
2 - open tyres.ini and you can try modifying the values of DY0 and DX0 front and rear tyres.
DX0 influences the longitudinal grip, and DY0 the lateral grip. Increase these values to raise the grip. Start by a step of 0.1 to understand the effect, but it surely would be noticeable on the AI lap time and AI behaviour

 

[loulaz]

Fellow skinners, I need your precious help regarding the NVIDIA Texture Tool Exporter. I wanted to generate NM textures for my skins, however I'm having trouble with the Exporter on Photoshop. It has so many different settings, I'm very confused and lost on how to create good looking normals. I've tried to look online for some tips or whatever but to no avail...
Does anybody have, like, "go-to" settings I could use with the Exporter? Or maybe I'm doing something wrong during the whole process? Attached is what I came up with while tinkering with the Exporter, if that's helpful. Thank you.

EDIT: For better context, the Michelin one is the Normal I'm aiming for and the Bridgestone one is what I got with the Exporter, clearly a lot of details are missing.

 

[Thockard]

How can you force AI cars to choose S tyres for the race instead of M?

Is there some kind of trick? I'd love to make the AI cars even more competitive.

Yeah I know... removing all other tyremodels. But is there any other way?

In some F1 mods the cars choose even wets for the free practice.. in dry Monaco.. Like in this Raceproject 2003 mod. How can I prevent this from happening?

This would be a great season to make but these cars in Monaco 2017 and Monaco 1998 like crazy. It's a total mayhem. It might be the steering ratio issue or simply the tyre issue as M's won't offer enough traction. I can test if I know how to adjust these (I absolutely hate car tweaking but whenever SimDream has even something to do with the cars it's always mandatory hehe). These cars have so many nice things like sounds and graphical details but you can't actually race them on Monaco at this state.

It was already too easy to create a seasson with the good old F2002. That car works like a dream on every track with zero issues.

This is Monaco with these cars. After 1st lap 18 out of 20 cars are already retired.

Edit: I improved them quite a bit by decreasing the steering rod ratio from 15 to 12. Still crashing but way less now.

Edit2: 1998 Monaco to rescue. They work now with steering rod ratio at 12 and race nicely and safely in the 1998 version.

You can also try increasing the steer_lock to 220° (If I trust the picture, I think it's currently 200°) with default settings for steering rod/ratio. It's maybe easier to adjust and should also work.

Regarding how to force AI to use S tyres for the race, i'm not totally sure, but I think it has something to do with a compromise between how many kilometers the tyre is able to run at its top value (defined by the ai_tyres.ini file) and its performance curve (.lut called in tyres.ini file)