Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 158,165 comments
  • 52,241,156 views
Haunebu52
If you are using Pure and Pure Planner, the CM time multiplier won't work. You have to use the Pure Planner app in the sim to change the time multiplier because it overrides the CM setting.
Click to expand...
@emissary935
The time multiplier in Pure Planner is initialized from the CM multiplier.

So it will take it, but if the pure dynamic controller is used and the option “use last” is active, Pure Planner will load the last state from the previous session.

So if the static controller is used, the time multi and all other settings in CM Drive should be used in Pure Planner…
 
Last edited:
MasterFocus
Any plan to add spectators? Kinda dull as is without any life around the Nordschleife!
Also, since its tagged "2025", actual 2025 sponsors around the Nordschleife would be a great addition (see picture below)

View attachment 1466666
Click to expand...

Haunebu52
This seems to be a consistent problem in AC, I am shocked at the amount of tracks that have no spectators. There's even fully modeled grandstands that are completely empty in many tracks. Unless I'm an idiot and there's some CSP setting I've missed, most of my tracks don't have spectators. That isn't an exaggeration either. I would honestly say most of the 1000 tracks I have in my collection don't have spectators or have very, very few. I know there are CSP spectator options, but I've changed them so it doesn't mess with spectator amounts.

I was hoping that the Track Decoration app by LeBluem would allow placement of spectators, but as of right now you really can't.
Click to expand...

@MasterFocus @Haunebu52

I just tried the 24H layout and the spectators are there and they are also well positioned, but I don't like the textures so I'll replace them, were you talking about a particular layout?

EDIT: Ok, found it, it looks like the Nordschleife layouts are missing the camera facing file.
I'll redo them my way and then post them here ;)
Already started:

Screenshot_slang_carl_fn_nurburgring_22-7-125-9-14-37.jpg

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-9-17-42.jpg
 
Last edited:
Aldo Raine
@MasterFocus @Haunebu52

I just tried the 24H layout and the spectators are there and they are also well positioned, but I don't like the textures so I'll replace them, were you talking about a particular layout?

EDIT: Ok, found it, it looks like the Nordschleife layouts are missing the camera facing file.
I'll redo them my way and then post them here ;)
Already started:

View attachment 1466710
View attachment 1466711
Click to expand...
On this particular tribune, there aren´t any spectators placed in real life since years due to safety reasons. Just my 2 cents.

@MasterFocus the sponsors are there, if you mean the ugly Xiaomi advert

1753173079347.png
 
Last edited:
Anyone knows where I can find suitable CS rims for this bad gurl ? I've found some CSR2 files but it's mind-bogglingly hard to separate that stuff lol

preview.jpg

preview.jpg


(not Ceky's 1250k triangles version)
 
Fall Guy
On this particular tribune, there aren´t any spectators placed in real life since years due to safety reasons. Just my 2 cents.
Click to expand...
I didn't know that. Obviously, my addition is just to add some color and life to the track. As I said before, I don't have the skills to do a good job yet. Is there a guide on GitHub for spectators? For now, I can only add them directly to the meshes, but I'd like to be able to position them only in certain spots and avoid certain overlaps with certain parts of the track. If there's a guide or suggestions, I could do a more thorough job.

For anyone who wants to try it, here's the link for the Nordschleife and Tourist layouts. I know, it looks more like an Oktoberfest, but I haven't been able to do any better so far. Just add the files to the assetto corsa/content folder.

https://www.mediafire.com/file/ttig2jkzb7nswox/Nordschleife_Spectators.rar/file

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-10-2-22.jpg

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-10-3-25.jpg

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-10-4-0.jpg

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-10-5-25.jpg

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-10-6-3.jpg
 
Last edited:
Speaking about spectators; for some time now (I assume in one of the CM or CSP updates), crowds have lost the ability to turn around to face towards the car I'm driving, so when I drive past, they stay in profile... and since most of them are 2D, they remind me of the menacing card-soldiers from Disney's Alice in Wonderland...

I don't know if it's a new optimization to improve the performance of the PC by saving a task, or if it's some new setting I haven't ticked or something similar, because before the spectators turned well on all the tracks, and now suddenly they don't do it on any... Or maybe instead of improving, I'm driving worse and worse and it's not even worth looking at me anymore...

Can someone enlighten this poor idiot so the excited masses can once again admire my great driving style, please...?
 
Last edited:
Aldo Raine
I didn't know that. Obviously, my addition is just to add some color and life to the track. As I said before, I don't have the skills to do a good job yet. Is there a guide on GitHub for spectators? For now, I can only add them directly to the meshes, but I'd like to be able to position them only in certain spots and avoid certain overlaps with certain parts of the track. If there's a guide or suggestions, I could do a more thorough job.

For anyone who wants to try it, here's the link for the Nordschleife and Tourist layouts. I know, it looks more like an Oktoberfest, but I haven't been able to do any better so far. Just add the files to the assetto corsa/content folder.

https://www.mediafire.com/file/ivzs3okvgn42oge/Nordschleife_Spectators.rar/file

View attachment 1466727
View attachment 1466728
View attachment 1466729
View attachment 1466730
View attachment 1466731
Click to expand...
great work! adds some atmosphere to the track now :)
 
kakauiyt
CTDP I need explanations.......................


This is the car rim
View attachment 1466341

If you hide this object here's what you get

View attachment 1466342

Where is the rim you may ask? Well it's the circular thing. The transparency in the texture make it look like a rim

View attachment 1466343



I fail to see a single argument about how this is effective. They modeled the side of the rim just to not model the front???
Click to expand...
One reason could be to perhaps use the same mesh for static and blurred rim.
 
Perico Lospa
Speaking about spectators; for some time now (I assume in one of the CM or CSP updates), crowds have lost the ability to turn around to face towards the car I'm driving, so when I drive past, they stay in profile... and since most of them are 2D, they remind me of the menacing card-soldiers from Disney's Alice in Wonderland...

I don't know if it's a new optimization to improve the performance of the PC by saving a task, or if it's some new setting I haven't ticked or something similar, because before the spectators turned well on all the tracks, and now suddenly they don't do it on any... Or maybe instead of improving, I'm driving worse and worse and it's not even worth looking at me anymore...

Can someone enlighten this poor idiot so the excited masses can once again admire my great driving style, please...?
Click to expand...
Perico the crowd still turns around, and I have everything updated to the latest versions.
Try driving a Ferrari or Lamborghini, or try a car with a female driver skin, and you'll see how they turn around.


I made a small modification to the new Fenyr Nurburgring track, I shortened the grass on the sides of the track, increased the length of the outer one and cleaned the straw-colored grass from the pebbles part, just replace the ext_config file in the extension folder, I didn't change anything else.

https://www.mediafire.com/file/zkav4u1g2mswc20/fn_nurburgring_ext_config.rar/file

Screenshot_tcc_renault_laguna_st_fn_nurburgring_22-7-125-15-28-29.jpg
 
Last edited:
Haunebu52
If you are using Pure and Pure Planner, the CM time multiplier won't work. You have to use the Pure Planner app in the sim to change the time multiplier because it overrides the CM setting.
Click to expand...
Is there no way to make it remember the multiplier I've set in the Pure Planner App? Or change the default time progression value set by Pure Planner? I'm looking to change it 30x for each session I play.
 
Screenshot_cf_viper_gt3-r_rj_istanbul_park_22-6-125-16-15-54.jpg


In ChemFlummi's Dodge Viper GT3-R 1.2 the internal banner reflects all the road colours, is there a way to tame this?
 
emissary935
Is there no way to make it remember the multiplier I've set in the Pure Planner App? Or change the default time progression value set by Pure Planner? I'm looking to change it 30x for each session I play.
Click to expand...
I answered you:
www.gtplanet.net

Assetto Corsa PC Mods General Discussion

Tried that but doesn't seem to work, I've been up to only 7/8° and the car was still too far Try the following: open up the preview window with the settings again and hit CTRL+use the mouse wheel to zoom the car in, then adjust the view angle slider again. Remember to tick the "in screen-space...
www.gtplanet.net www.gtplanet.net
 
Peter Boese
I answered you:
www.gtplanet.net

Assetto Corsa PC Mods General Discussion

Tried that but doesn't seem to work, I've been up to only 7/8° and the car was still too far Try the following: open up the preview window with the settings again and hit CTRL+use the mouse wheel to zoom the car in, then adjust the view angle slider again. Remember to tick the "in screen-space...
www.gtplanet.net www.gtplanet.net
Click to expand...
Sorry! Missed it, forum didn't send the notification, many thanks :)
 
Hello can anyone tell me the best Montreal Circuit Gilles Villeneuve to use as mine somehow has texture problems on the grid slots?

I tried a track but there the cars are just porting into the pits..
 
Last edited:
How can I manage my opponents' fuel and pit stops?
What app should I use?
 
Aldo Raine
I didn't know that. Obviously, my addition is just to add some color and life to the track. As I said before, I don't have the skills to do a good job yet. Is there a guide on GitHub for spectators? For now, I can only add them directly to the meshes, but I'd like to be able to position them only in certain spots and avoid certain overlaps with certain parts of the track. If there's a guide or suggestions, I could do a more thorough job.
Click to expand...
Download AC Modding Manual and heve fun 🙂

Short answer: use a track mesh (as you are doing now) or create an invisible (or non renderable) surface for the crawd to stand on.
 
timetoo22
Well indeed. We are like those bunch still playing GTR2 which is like minecraft these days looks wise. Frankly so many others have dropped the ball, even kunos with ACE.

I would say AC is the best sandbox type driving sim. Its not the best racing sim. And only on PC as the console AC is utter gash.
I have just recently and after spending years slagging it off, got into drifting, boy those guys put some love into their mods, never seen anything like it on some of them, incredible the new stuff I've learnt that you can do with ini files.
So after saying i don't release my mods because they will get turned into pink drift cars... I'm now making drift cars... so in theory i can release those.......... Maybe this one first!

View attachment 1465841
Click to expand...
@timetoo22
So you are the guy, that has all these nice cars and never answer questions on racedepartment/screenshot thread?
Baiting is a great thing, I'm a fish that has taken the bait and would like to know if we'll ever get the chance to have these vehicles?
Esp. these for me.
1753235171867.jpeg
1753235149730.jpeg
1753234987987.jpeg
1753234800274.jpeg
 
Last edited:
Ipsem Lorum

Nürburgring 2025 1.0 ACC Conversion (Laserscan) FREE​

​


Note: All credit goes to Fenryr, the following update notes are copy-pasted from his recent discord post:​

Finally, I can share with you version 1.0 of the Nürburgring and that means it's now FREE to download for everyone!

UPDATE 1.0
This update brings the mod to what I consider a complete state, featuring nearly every layout currently used today.
Future updates and fixes will still come based on community feedback.
  • Lots of new layouts
  • Many visual fixes such as floating objects or flickering textures
  • 2025 Renovation implements such as removing the Astroturf at T1 and adjusted curbs on the Nordschleife on multiple locations
  • Added brake markers, and sponsor boards
  • More tents and spectators on the 24H layout
  • Also tried to optimize the mod with implementing LODs
  • New VAO patch for every layout
  • And a lot more...
As always, thanks for your support, be safe!

Stay tuned for more!

Download V1.0 here


Enjoy! 😉
_______
Support Fenryr on Patreon: https://www.patreon.com/c/fenryr24/home
Click to expand...

Could you convert Monaco from project cars？

Aldo Raine
I didn't know that. Obviously, my addition is just to add some color and life to the track. As I said before, I don't have the skills to do a good job yet. Is there a guide on GitHub for spectators? For now, I can only add them directly to the meshes, but I'd like to be able to position them only in certain spots and avoid certain overlaps with certain parts of the track. If there's a guide or suggestions, I could do a more thorough job.

For anyone who wants to try it, here's the link for the Nordschleife and Tourist layouts. I know, it looks more like an Oktoberfest, but I haven't been able to do any better so far. Just add the files to the assetto corsa/content folder.

https://www.mediafire.com/file/ttig2jkzb7nswox/Nordschleife_Spectators.rar/file

View attachment 1466727
View attachment 1466728
View attachment 1466729
View attachment 1466730
View attachment 1466731
Click to expand...
The grass looks good.
 
Hey fastlane gurus... could someone finally fix the Kylami 1967 and RJ_Kyalami 1975 mandatory starting line crash on races? That is notorious and it has been there since the day one. It's a lovely conversion of a classic track and I even made all eyecandy for 1982, 1983, 1984 and 1985. But that starting line crash... how can it still be there? :)

I wish I knew how to make proper fastlanes. It's tough I've tried but no cigar.

www.gtplanet.net

Assetto Corsa PC Mods General Discussion

Hi Does anyone know if it's possible to disable collisions with certain track objects via ext_config file or something that doesn't involve editing kn5 files? I was able to make it "invisible" by making the mesh non-renderable in ext_config but I can still crash into it.
www.gtplanet.net www.gtplanet.net
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
5K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
44 45 46
Replies
1K
Views
305K
RMi_wood
RMi_wood
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
254
Views
52K
Apocalypse211
Apocalypse211
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
22K
Cote Dazur
Cote Dazur
Back