GTPlanet Scale model thread

  • Thread starter bondy_1625
  • 15,734 comments
  • 1,210,301 views
MSZ
I'm still waiting for a 1:18 ZL1 1LE...
I imagine GT Spirit or Auto World will do it.

And after spending a bit of time looking at this Camaro SS, I feel it is roughly on par with your typical diecast AUTOart in everything except brakes. The brakes are one of two weak points on the model, as they are static and not photoetched. The other weak point is the solid grills. Overall though I like the model a lot, now if only AW did some modern Mopar in 1/18...
 
It looks a lot better when they used their diffused lighting:

21462626_850826165081486_8824623735355722845_n.jpg


21765054_850826218414814_8466106510003861325_n.jpg


21752298_850826255081477_2396383020080971619_n.jpg


21463005_850826298414806_593822394416989992_n.jpg
 
Yo I didn't know this Jackie Chan livery existed!

I like this livery, but I don't like the car. Boo.

I knew about the car since I have watched a few WEC races this season. I believe one of the drivers is also Chinese too.
 
Non that I could tell, will look it over again after I get off work. Completely destroys my old Ricko RS200 road car in overall looks though.

Anything destroys that Ricko RS200 :lol:

I'm reluctant to go back to Otto because of the bad decal application on that S1 Quattro I had. The questionable proportions on the R34 also has me wondering if the RS200 is proportioned correctly too.

MSZ
I knew about the car since I have watched a few WEC races this season. I believe one of the drivers is also Chinese too.

See this is what happens when you don't watch any motorsports! I know nothing :P
 
See this is what happens when you don't watch any motorsports! I know nothing :P

Being a family man, television is really my sole entertainment at home and luckily Fox Racing is part of the TV package so I got to watch some of the races.
 
It won it's class in Le Mans, I think.

1-2 in class as well, and led the race overall for about 3 hours when the #1 Porsche retired 4 hours from the end. It finished 2nd overall to the #2 Porsche, which itself had recovered after problems in only the 4th hour of a race where all the LMP1 cars suffered problems, 4 of them terminal.
 
Would you be interested in the RWB 993 in purple? I've decided I'm selling it now.
Thanks for the offer, but I've decided not to get any RWB models or other tuner 911s. Another road I can't afford to go down. :lol:
 
Arrived today, light blue GT Spirit Porsche 911 2.8 Carrera RSR. Goes nicely with my orange one!

35809169483_b6f1d7e841_b.jpg

36480561551_9af0f86f0e_b.jpg

36571993286_9bbc3cd819_b.jpg

Wow simply wow !

These are so beautiful.

Who makes them ?
How much did you get them for if you dont mind answering?



Annnnd that gun metal RB FD:

21077340_1948207792087079_1791726983680325540_n.jpg


20953249_1948207885420403_3562547168466258957_n.jpg


21032792_1948207888753736_1319999609141962104_n.jpg


20953028_1948208088753716_3088540104663828189_n.jpg


Not going to lie- among all the other available colours, I think the rivets compliment the grey the best. It gives it a solid impression of a carefully built machine.

Plus those wheels look bomb! I think this is the one to get.


Edit: That's what my impulse self says anyway. I still dislike that square wing.

I'll wait for another IG with those wheels to come out. On an R32 I hope. Fingers crossed.


Edit: Oh snap there's a blue one too:

21032503_1948206505420541_989517383773276319_n.jpg


21034618_1948206508753874_7430412254070295963_n.jpg


20953785_1948206678753857_3956924575290507262_n.jpg

Would you mind giving the references and price of the blue one ?


I rigged up an enclosed display case lol...

I want to see more of the silver/gray porsche...
Can i have the dimensions of your case?


Going forward, could you all list the make and price at the time of your for each model ?
 
Last edited:
21994457_1426189504125865_8106690577251108621_o.jpg


If only this was in 1/18...

CTznOfTime
Would you mind giving the references and price of the blue one ?

Going forward, could you all list the make and price at the time of your for each model ?

Ignition 1/18 Mazda RX7 RB
You can find Ignitions on carmodelz, amiami and eBay.
 
Well today marks yet another celebration of my Day Of Birth (can't say "my birthday" all the time, that's too mainstream :P), and it's been productive in terms of scale models. An early bird trip to Porto has netted me another car for my 1/43 collection, one that almost became an Alpine.
You see, the toy store I visit almost every time I enter the city had the blue/orange version of the Alpine Vision Gran Turismo, which enticed me quite strongly. However, the prospect of owning this particular car, both as a first-time purchase and as a die-hard fan of it, got the better of me. Without further ado, here it is;

Ford Capri 280 Brooklands (aka "I can't believe it's not British Racing Green") by Corgi Vanguards

SAM_2095.JPG
SAM_2096.JPG
SAM_2097.JPG

SAM_2098.JPG
SAM_2099.JPG

Yep, it's my first ever Mk.3 Capri model. I adore the car far too much to avoid owning a scale-model version of it, and besides, having never been sold in Portugal, it's a sight for sore sad eyes that don't get to see the real thing. Sure, you can argue the car is essentially the 3.0S casting with different rims and paint, but I'm afraid the caring about that part is very limited.

And after all, that's what the Mark 3 is in real life, isn't it...? :P
 
@MSZ

Has your Ducktail RWB 964 arrived? I ask because I've asked the dude to send mine along with a display case together, so I don't know who's waiting on what at this time.
 
@MSZ

Has your Ducktail RWB 964 arrived? I ask because I've asked the dude to send mine along with a display case together, so I don't know who's waiting on what at this time.

Nope. I don't think anyone in North America received one yet, only the Chinese retailers did. Annnnnnd the Chineses are on a week long national holiday.:boggled:
 
Ooooh, I was totally wrong about the RWB, it is already in stock @ ToMo, and they are going to ship mine shortly!
 
Back