Angry Miata....

[Lethalchem]

That thing looks great! I am really digging that. Everything looks better with fatter tires on it to me! Then again, I'm weirrd like that I guess.

The rivets arn't any big issue, as a friend of mine had them on his RX7 for awhile before smoothing them out with fiberglass. Looks amazing now:

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_03.jpg

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_14.jpg

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_64.jpg

The miata's stomp everyone's ass here on the autocross courses, and I can only imagine how it would handle rolling on those meats. Hmmm...I think I smell a project car coming....

 

[Flerbizky]

so it's all part of the JDM look now?

Nice job removing the rivets - looks very very good 👍

Funny thing though - I liked it better with rivets - Must be an 0ld sk00l thing I guess (Like the 240Z in GT4P)

 

[Victor Vance]

Wow, a body mod that actually increases performance. The owner has clearly taken advantage of being able to now install wider tires on their Miata, without taking a huge hit aerodynamically.

And that is definitley an American car with Japanese plates. How many places in Japan would you be able to find a Dodge Dakota, Chevy Astro, and a Ford Ranger all in the same place? Check the background.

That's a Chevrolet Express and it looks like a Seville behind the Dakota. Definately american, and the st in headlamps are definately not cool 👎

I hope there's a pop up kit for the C6 when SEMA 2005 comes around. Also, what's up with the "Tofu Boy Xtreme" rims?

 

[Darin]

Thats the best Eunos MX5 Roadster i've ever seen.

 

[240Z]

Very very nice. I want.

 

[standard235]

That thing looks great! I am really digging that. Everything looks better with fatter tires on it to me! Then again, I'm weirrd like that I guess.

The rivets arn't any big issue, as a friend of mine had them on his RX7 for awhile before smoothing them out with fiberglass. Looks amazing now:

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_03.jpg

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_14.jpg

http://www.arscca.com/images/current pics of my RX-7/myr1 7-10-04_64.jpg

The miata's stomp everyone's ass here on the autocross courses, and I can only imagine how it would handle rolling on those meats. Hmmm...I think I smell a project car coming....

You owe me a new keyboard...That RX7 was NICE.

 

[Victor Vance]

Thats the best Eunos MX5 Roadster i've ever seen.

With FS rims and set in headlamps, it's not

 

[Lethalchem]

You owe me a new keyboard...That RX7 was NICE.

Hehe, sorry. Yeah, he's put a LOT of work into that thing. He deserves the praise. It's got the balls to back up the looks as well, which is the way it should be. 👍

 

[Boost Lee]

He blew his motor on the dyno not too long ago. The words '3 Rotor' were being tossed around..

 

[CAMAROBOY69]

I think this car looks excellent!!! Its nice to see people with the balls to do something different. I bet that thing is a monster on the track. Great job and just ignore the idiots that are in here. 👍

 

[TwinTurboJay]

***installing fender flares on nissan 350z zipzaps rc car***

 

[Lethalchem]

He blew his motor on the dyno not too long ago. The words '3 Rotor' were being tossed around..

Hehe, you know you've got a ncie ride when you're universally recognized.

Yup, he blew it but that motor had a lot of racing on it (he's a blast to watch at the autocross). Chuck's finished finding a new house now, so the 3 rotor is now a green light, from his hints 👍

 

[CAMAROBOY69]

Yup, he blew it but that motor had a lot of racing on it (he's a blast to watch at the autocross

You know the best thing about blowing a motor up is??? The next engine you install ends up with more HP. 👍

 

[Victor Vance]

Truth.

(blew the original 4a-g)

 

[Victor Vance]

Hehe, you know you've got a ncie ride when you're universally recognized.

Yup, he blew it but that motor had a lot of racing on it (he's a blast to watch at the autocross). Chuck's finished finding a new house now, so the 3 rotor is now a green light, from his hints 👍

Is the three rotor the 787B engine? Because as far as I know all RX-7's were two rotors... imagine the cost for that thing

 

[Flerbizky]

Is the three rotor the 787B engine? Because as far as I know all RX-7's were two rotors... imagine the cost for that thing

I think, and I'm fairly sure at this, that the 787B is a 4 rotor...

But, as usually, I'm probably wrong....

 

[Victor Vance]

Well, then what's the three-rotor? An old Mercedes rotary???

 

[miata13B]

That simply is marvelous. . . . marvelously horrid and downright dishonor shoned on my name!

 

[Victor Vance]

Huh?

 

[miata13B]

Oh, that was in reference to that nasty arse Miata in the link on the first post.

 

[Victor Vance]

Oh, lol

Can you back me up on whether the 787B was a 3 or 4 rotor?

 

[I6-4-eva]

Oh, lol

Can you back me up on whether the 787B was a 3 or 4 rotor?

you serious? Werent you the one who posted all those rotary pictures in The Engine Thread a while ago? anyway here are the specs.

 

[Lethalchem]

I don't know anything about rotary engines, so I don't know how/what he's doing in regards to having three rotors. From my very limited understanding, you can add another rotor to his existing engine, but I don't pretend to know what I'm talking about in this area. He just made it sound more like a mod, than an entire engine swap, I don't know.

 

[Flerbizky]

I don't know anything about rotary engines, so I don't know how/what he's doing in regards to having three rotors. From my very limited understanding, you can add another rotor to his existing engine, but I don't pretend to know what I'm talking about in this area. He just made it sound more like a mod, than an entire engine swap, I don't know.

There's some 3 rotor info right here....

 

[Lethalchem]

There's some 3 rotor info right here....

I just read a post by him on my local car club site. He's doing a conversion. There's already a 3 rotor running around here that's only putting out 450RWHP in a 3rd gen rx7.

 

[Takumi Fujiwara]

3 rotor engines aren't necessarily powerful, remember that they did come stock in the Eunos Cosmo.

 

[Driftster]

3 Rotors wern't that powerful...just like 13B's and 12a's....you gotta modify them.....And remember...don't corner too hard with under a 1/4 tank of gas...