Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Paiky
  • 129,795 comments
  • 33,516,479 views
Guys i Found in facebook a Nissan 400z 2022 mod , but need some work , anyone interessed?

Post up a link and im sure someone will jump in.
upload_2021-6-2_7-16-1.png
 
Last edited:
@norms
I think the timing objects may be close to the track. Is it possible you were pushed onto the grass or something like that at some point on your missing lap? You may have went around a timing node and invalidated that lap.

I believe you may be right. You know the scenario where the lead cars are getting further away with each lap, and you push just a little too hard and end up losing time. After checking the lap in question...I did run wide in turn 5, went in too deep, lost the lap.
20210601-184947-vhe_goiania-scirocco_gc10_v6.jpg


Thanks for solving that for me, had me wondering!
 


Has anyone tried this Ford GT40 yet. This modder usually quite gets it right in making Kunos street cars accessible to "lesser pilots" such as myself.

Circuit Long Beach 2019 fm7 by Terra21 + UPDATE cam + skins RD https://evoload.io/v/UNlTrbJNPPzXxr

21_long_beach-optimisation test by jk https://evoload.io/f/am9ot2VIoj3TIP
Wow thanks I wasn't aware such attempt to optimising Long Beach existed.
Is there anything of the kind existing for Terra21's Road Atlanta please? I believe it's also a FM7 conversion, I quite like the layout, it's actually more technical or challenging than Jim Loyd RD version

 
@ItsBongWater

Amaroo: (second link is to save you from pop-up hell)
http://assetto-db.com/track/eastern_creek2014/amaroo
http://www.mediafire.com/file/6m9mq...aceway_2014_v3.5_a_R1cho_by_Rainmaker.7z/file

another:
https://acmods.net/wp-content/uploads/2015/rd/easterncreek.rar

note: Google search keyword = "Assetto Amaroo"


Amaroo for rF (seems pretty straight forward to convert)
issues:
1. There are no supports for advert billboards, they just float in the air (can be lowered to hide that fact)
2. Huge terrain gaps for infield would be hidden by trackwalls in cockpit view, but may reveal themselves from a high trackside cam.
3. Model needs to be split by materials because there is no "road mesh" as is.

View attachment 1014466

It's probably not obvious to anyone not from Australia, but the 'Amaroo' layout at Eastern Creek is a just a tribute (in name only) to the orginal 'Amaroo Park' circuit which was also in Sydney, but was turned into a housing estate 20+ years ago. They're not the same circuit.

EDIT: https://www.racingcircuits.info/australasia/australia/amaroo-park.html

Screen Shot 2021-06-02 at 9.47.34 am.jpg
 
Last edited:
On the subject of track optimisation, I'm wondering as to what specific things can be done to optimise a track more properly?
I'm mostly having issues with the Zandvoort 2020 track where I can run about 10 cars less in a grid than I can on a Kunos track for example
 
Lam
Is there anything of the kind existing for Terra21's Road Atlanta please? I believe it's also a FM7 conversion, I quite like the layout, it's actually more technical or challenging than Jim Loyd RD version


Try to enjoy the RD version for the time being. Johnr777 (over at RD) is creating Road Atlanta from scratch. His previous work includes Mosport and a collaboration on Road America. So... we all can look forward to a AAA-rated Road Atlanta.
 
It's probably not obvious to anyone not from Australia, but the 'Amaroo' layout at Eastern Creek is a just a tribute (in name only) to the orginal 'Amaroo Park' circuit which was also in Sydney, but was turned into a housing estate 20+ years ago. They're not the same circuit.

EDIT: https://www.racingcircuits.info/australasia/australia/amaroo-park.html

View attachment 1014512
I miss that circuit, even though I wasn't born to see a race at Amaroo Park. It's still a shame, same with Oran Park and maybe one day Lakeside just outside of Brisbane, which I live on the Gold Coast so as they say it hits close to home.
 
@ItsBongWater

Amaroo: (second link is to save you from pop-up hell)
http://assetto-db.com/track/eastern_creek2014/amaroo
http://www.mediafire.com/file/6m9mq...aceway_2014_v3.5_a_R1cho_by_Rainmaker.7z/file

another:
https://acmods.net/wp-content/uploads/2015/rd/easterncreek.rar

note: Google search keyword = "Assetto Amaroo"


Amaroo for rF (seems pretty straight forward to convert)
issues:
1. There are no supports for advert billboards, they just float in the air (can be lowered to hide that fact)
2. Huge terrain gaps for infield would be hidden by trackwalls in cockpit view, but may reveal themselves from a high trackside cam.
3. Model needs to be split by materials because there is no "road mesh" as is.

View attachment 1014466

Amaroo would be a great addition to AC. For a short track length it has quite a large change in elevation and hence it is hard on brakes and tyres.
I remember having to pump the brake pedal just to get a pedal due to the heat expansion in the calipers.
It provided close racing and was the only place I got to see a 934 and 935 in action.
 
@ItsBongWater

Amaroo: (second link is to save you from pop-up hell)
http://assetto-db.com/track/eastern_creek2014/amaroo
http://www.mediafire.com/file/6m9mq...aceway_2014_v3.5_a_R1cho_by_Rainmaker.7z/file

another:
https://acmods.net/wp-content/uploads/2015/rd/easterncreek.rar

note: Google search keyword = "Assetto Amaroo"


Amaroo for rF (seems pretty straight forward to convert)
issues:
1. There are no supports for advert billboards, they just float in the air (can be lowered to hide that fact)
2. Huge terrain gaps for infield would be hidden by trackwalls in cockpit view, but may reveal themselves from a high trackside cam.
3. Model needs to be split by materials because there is no "road mesh" as is.

View attachment 1014466

There's a 3.5+ version (by R1CHO and Rainmaker, Reworked DaBaeda)
The original link is dead but I can upload it
 
I miss that circuit, even though I wasn't born to see a race at Amaroo Park. It's still a shame, same with Oran Park and maybe one day Lakeside just outside of Brisbane, which I live on the Gold Coast so as they say it hits close to home.
I am almost 2500 km north of Amaroo, so no local connection at all,
I just remember as a young fella sitting with my dad watching my hero Brocky , and the other Aussie greats race on the TV , Mike Raymond commentating.
I miss the track, it reminds of the good times of my life.
Heaps of great videos here
https://www.youtube.com/c/Super100MPH/search?query=amaroo
 
Last edited:
Hey guys. Long time lurker here.
Apparently a lot of people at some Toprace discord server are mad at you, lmao.
Guess there's no bad publicity. You seem like a cool bunch.

Anyways, did you manage to get crash/toprace cars before they got deleted from their discord?

Thank you
 
My AC truly has a life of its own. Yesterday the gears HUD was fine, sitting at the bottom right corner.
Boot the game today and to my surprise it moved to the top left corner... It's ***** huge and I can't move it.
No prompt, nothing - little pin doesn't even appear. So... What gives ? Is it possible to 'reboot' it ? Cause now it just loos so weird.

j7jPmd0.png

No idea lads ? Changing screen resolution, connecting my pc to the telly, nothing works. And it's ugly.
 
Last edited by a moderator:
Hey guys. Long time lurker here.
Apparently a lot of people at some Toprace discord server are mad at you, lmao.
Guess there's no bad publicity. You seem like a cool bunch.

Anyways, did you manage to get crash/toprace cars before they got deleted from their discord?

Thank you

I have many of them, do you need one in particular?
 
"Driver_SimDream_1996.kn5" required to run the 1996 F1 set.
It can be replaced manually, but it's not worth the hussle. Anyone has it?

EDIT: asr-driver-1990.kn5 model works just fine. No need to reposition.
Don't forget to edit driver3d.ini and change the field 'NAME=Driver_SimDream_1996' to 'NAME=asr-driver-1990' and to replace all the HIDE_OBJECT fields with these lines:

[HIDE_OBJECT_0]
NAME=412t2_helmet_berger_SUB0

[HIDE_OBJECT_1]
NAME=DRIVER:Driver_Body_SUB0 -> :D is this : D written together.

[HIDE_OBJECT_2]
NAME=412t2_helmet_berger_SUB1

[HIDE_OBJECT_3]
NAME=412t2_helmet_berger_SUB2

[HIDE_OBJECT_4]
NAME=412t2_helmet_berger_SUB3

EDIT: JUST DOWNLOAD THE FILE PROVIDED BY DELPINSKY, TWO POSTS BELOW!

Best thing is, you only have to do it for one car, and then copy the file to the remaining folders.
Cheers!
Does anybody still have the asr-driver-1990.kn5 model lying around? Can't find it anywhere anymore.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back