Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 147,925 comments
  • 44,197,824 views
Apocalypse211
Amazing, thanks.

How about those 5 tracks that I mentioned? Has someone already made tracks with 2012 sponsors? If not, I will create them. I have tested excessively all other circuits in the calendar and I know the best ones but for those five I need some guidance.
Click to expand...
India : https://assettocorsa.club/mods/tracks/buddh-international-circuit.html

Singapore : sling version is a pyverr extension https://www.patreon.com/posts/singapore-f1-v3-90957826

Korea : https://www.overtake.gg/downloads/korea-2024.61197/

Abu dhabi : Tricky one, but i would say ACU as it's the most popular and has some extension in race department, support night

COTA : i'll let someone else answer, there's the ACU version which is the most popular, but in 2022 a conversion of cota (laser scanned) from ACC was done so i don't know which one would be better
 
Last edited:
Masscot
Ah, no worries, seems like something got lost in translation. Despite lack of data, if the Mustang had default gear ratios suitable for Hockenheim (for example) then that would be a step in the right direction. At the moment the default ratios are way too short for general pick-up-and-play DTM use.
Click to expand...
Drivetrain update for the '92 DTM mustang based on Raceroom data

New 1st-5th.rto / new final.rto / updated drivetrain.ini default gears and H-pattrern shifting ( I think the car was a H-pattern) / new power.lut (540bhp) / updated ai.ini / updated ui for new power.lut / updated setup.ini

To use unpack the cars data folder in CM, rename the data.acd to something like data.old (you can always go back this way), unpack the zip and copy paste files into data / ui folders.

Edit a little info on the real car found on the internet somewhere...

>I will put shortly technical information of these cars; Engine: 302 Yates/Kinsler/EFI Technology built by Matt Johnson and Scott Newbury Powered By Ford, Orlando Fl, about 540hp. Transmission: Getrag Motorsport 5speed w/elct oilcooler. Rear Axle: Ford 7,2" , gears made in Finland by ATAgears (same company make Ferrari F1 gears), w/elect oil cooler and floater axles. Front susp: McPherson Ford Sierra RS500. Bilsteins. Rear susp: Four link w/Watt's. 1,5degree camber, adj toe. Bilsteins. Brakes: AP Racing 15"/13" w/ABS (AMG Mercedes). Wheels: BBS 13" centerlocks. Body: Carbonfiber front and rear bumpers, doors and hood. Weight 2450lbs. Top speed +300kmh (Hockenheim).<<
Click to expand...
Click to expand...

@JK1977
 

Attachments

Last edited:
graveltrap
Drivetrain update for the '92 DTM mustang based on Raceroom data

New 1st-5th.rto / new final.rto / updated drivetrain.ini default gears and H-pattrern shifting ( I think the car was a H-pattern) / new power.lut (540bhp) / updated ai.ini / updated ui for new power.lut / updated setup.ini

To use unpack the cars data folder in CM, rename the data.acd to something like data.old (you can always go back this way), unpack the zip and copy paste files into data / ui folders.

Edit a little info on the real car found on the internet somewhere...



@JK1977
Click to expand...
I think the car had sequential gearbox 🤔


1734441150137.png


Video of it in action
 
Last edited:
EvilGloomy
Requested VR Driving to use AI to do the physics for this Mustang DTM. Now included Graveltrap's gearing as VRD's team wasn't able to find accurate data on it.

They rebuild the physics completely, new aero, suspension, tires, engine, power, brakes etc.

Download f302 ford mustang dtm zip

Download File f302 ford mustang dtm zip
sharemods.com sharemods.com
Click to expand...
The link seems broken to me, maybe its just me but I keep getting an error
EDIT: It worked just now. My bad
So is this only the download that includes the gearing or did it change the physics too? It might be in my head but it felt much more floaty and the tires felt very slick in your download?
 
Last edited:
Swisss
The link seems broken to me, maybe its just me but I keep getting an error
EDIT: It worked just now. My bad
So is this only the download that includes the gearing or did it change the physics too? It might be in my head but it felt much more floaty and the tires felt very slick in your download?
Click to expand...
Did not tried that one, but most of their physic "update" are very floaty to me
 
racinjoe013
West Coast Race Track ;);)

West Coast Race Track

Credits:

-- Original track - Sauron
-- Sections and logo files - @Fanapryde
-- Crowd Files - @Kniker97
-- Major mesh work - Asked not to be credited
-- Additional tree objects - @macko68
-- Replay cams - @CrisT86
-- Texture updates, config file, ai, small mesh work, replay cams - @racinjoe013
-- Track testing\feedback - @macko68 , @Perico Lospa , @Quikslvr , @Fanapryde , @CrisT86 , @X90 , @Yellowstone

NOTES: READ the README file.

Lots more could be added, but there comes a time when you need to take a break from a track and that time is now.
Click to expand...
Small update that is somewhat optional. Use the link in the quote to get version 1.01.

-- I fixed a small portion of the track wall in front of the right side grandstands that was above ground. It was almost unnoticeable which is why I would call this optional. Nothing else was changed. If you switched to the kn5 file with the banners on the walls, you don't need this update. That version didn't have the problem.
 
Last edited:
seluhehi
"I am sorry, it was a mistake. Rename the file wrong.Trade the maserati for the alfa romeo 2300c"

As I said in the post I have a big mess that I'm trying to put everything in its place.I'm looking for time to sort all the folders because I'm a bit of a mess.:-)
Click to expand...
Good evening, how can we get this pack? I would really like to have it, thank you.
 
Another leaderboard 05/07 update. Now year specific car/driver information.

Now it has specific driver and team / engine manufacturer information and the national flag showing next to driver name.

Both leaderboards are designed for those seasons only. Or to handle specific amount of cars.

My 2005 season has a 20 car grid and the 2007 season has a 21 car grid.

There is also a third leaderboard in the package. That is generic old white one that shows in the season videos. That is suitable for 2004-2009 era. That can take any amount of cars but it doesn't show the driver and team/engine manufacturer information in the driver banner.

Here is the video that shows the update (national flag and Team/engine manufacturer for each driver).

Footage from 2005 Season / Spa (SOL HEAVY DRIZZLE)



Download:

New leaderboard for F1 2005 and 2007 seasons

There was not any kind of leaderboard for this era of F1 done for AC. There's still a bug (that was in the original modern Leaderboards that I used as a base) in driver comparison. It doesn't pick up the correct driver from the grid and shows the...
www.overtake.gg www.overtake.gg
 
EvilGloomy
Requested VR Driving to use AI to do the physics for this Mustang DTM. Now included Graveltrap's gearing as VRD's team wasn't able to find accurate data on it.

They rebuild the physics completely, new aero, suspension, tires, engine, power, brakes etc.

Download f302 ford mustang dtm zip

Download File f302 ford mustang dtm zip
sharemods.com sharemods.com
Click to expand...
After this 'update' this car is near impossible to drive...back to the original...:scared:
 
Fanapryde
After this 'update' this car is near impossible to drive...back to the original.
Click to expand...
It drove pretty well imo, just need to be more careful with the throttle. This is running the correct axle suspension and not some modern double wishbone.
 
EvilGloomy
It drove pretty well imo, just need to be more careful with the throttle. This is running the correct axle suspension and not some modern double wishbone.
Click to expand...
To me it feels like driving with slicks on a wet track. I didn't even try to change the setup ---> binned
 
It is an early 90s Mustang on live axles suspension, weighing only 1000KG with 540HP, vintage slicks and home depot aero, did you expect it to drive like a modern GT3?
 
EvilGloomy
It drove pretty well imo, just need to be more careful with the throttle. This is running the correct axle suspension and not some modern double wishbone.
Click to expand...
You should test drive the car in Raceroom just to know what it's actually drives like. Since KW Studio's actually have access to the real car and it's data, And judging by how it drives in that game. This so called " Ai Physics " thing is just bad. The car is not floating around like that irl. You can simply just watch some of the onboard videos that are around and you can very clearly see that the car is pretty planted just like the E30, 190E are. Feels like the Ai looked up the normal 5.0 GT road car and used that.

Like the car was not good irl, But i very much doubt it was floating around on track and had race tires that barely gripped. These were some of the most "advanced" race cars at their time. You mean to tell me that the rear tires are spinning in like an sports car in 1st gear? Give me a break.
 
EvilGloomy
The tires are the same Kunos 90s DTM tires that are generated at the correct size as far as I know. It seems you guys just can't manage the throttle.
Click to expand...
I just tried it, and i am very pro using AI i think it would really help and be good for those less able to do the physics. Sadly as uch as i was excited it was not a great advert for it. You sort of slapped it in here like 'hold my beer' and its not really drivable, the car pivots at a weird place and then the rears just keep slipping in that AC awful on grass way.
I'm quite gutted actually, I'm all for AI generation, but this doesn't work even if i bump up tyre grip.
I did take it out in race room and not suggesting that must be accurate but at least it feels OK and sort of tries to lift the front inner wheel as you accelerate out of the corners which is quite satisfying. (not been in race room in ages and it looks pretty good now)
 
timetoo22
I just tried it, and i am very pro using AI i think it would really help and be good for those less able to do the physics. Sadly as uch as i was excited it was not a great advert for it. You sort of slapped it in here like 'hold my beer' and its not really drivable, the car pivots at a weird place and then the rears just keep slipping in that AC awful on grass way.
I'm quite gutted actually, I'm all for AI generation, but this doesn't work even if i bump up tyre grip.
I did take it out in race room and not suggesting that must be accurate but at least it feels OK and sort of tries to lift the front inner wheel as you accelerate out of the corners which is quite satisfying. (not been in race room in ages and it looks pretty good now)
Click to expand...
I am sorry but wtf? AI generated physics?
 
Junshen Wu
Kunming 52s Motor Park(昆明52秒赛车运动公园)
A real kart track in Kunming, Yunnan province, China(中国云南省昆明市).
Made by me.
Grassfx, rainfx and lights added, csp 1.79 or higher needed.
1 layout, 2 cameras
View attachment 1404535
View attachment 1404536
View attachment 1404537
View attachment 1404538
View attachment 1404539
View attachment 1404540
Download link:https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
Click to expand...
Kunming 52s Motor Park(昆明52秒赛车运动公园) updated to V2
Update to V2
New ai, new lights, new texture, new camera.
Screenshot_hipole_rental_kart_kunming_motor_park_18-11-124-20-3-21.png

Delete old version before installing new.
Download link:https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
 
Last edited:
Junshen Wu
Changzheng Kart Club(长征卡丁车俱乐部)
A real kart track in Qujing City, Yunnan province, China(中国云南省曲靖市).
The name Changzheng means the Long March, commemorates the Red Army's Long March from 1934 to 1936.
Rental and electric kart only in reality.
The mod is made by me.
·5 pits
·2 layouts
·Rainfx, grassfx and lights.
·CSP 1.79 or higher is needed.
View attachment 1400784
View attachment 1400785
View attachment 1400788
View attachment 1400790
View attachment 1400791
View attachment 1400792
View attachment 1400793

Download: https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
Click to expand...
Changzheng Kart Club(长征卡丁车俱乐部) Updated to V2
New model, new ai and new layout (2025, current layout)
bgr00.png

Screenshot_piereligio_sodi_sr4_outdoor_changzheng_kart_v2_18-11-124-20-34-47.png

Delete old version before installing new.
Download: https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
 
Last edited:
Guys does someone know the code for the turbo display for a digital panel I want to add it, for the Nissan r33 JGTC
I know that the kunos doesn't have for "digital_instruments.ini"
 
ltsturm
Hi guys, new here to this absolute heaven for AC mods :D
i'm trying to fullfill my le mans grids. But i'm am missing a few entries.

  • Panoz esperante 1997-1998
  • Marcos LM600 somebody made a skinpack for it at RD but can't find the car.
Thx
Click to expand...
The panoz is easy to grab look on any AC cars website and the car's there the marcos LM600 you need BEM's which is on here. We have a marcos in development too aswell as an evo
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
24 25 26
Replies
760
Views
151K
graveltrap
graveltrap
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
Replies
29
Views
6K
CarreraGT
CarreraGT
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
4K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
9K
OH1955
OH1955
Famine
Assetto Corsa Competizione Ultimate Edition Now Available on Steam
Replies
8
Views
9K
Apocalypse211
Apocalypse211

Latest Posts

Back