Assetto Corsa PC Mods General DiscussionPC

[Rui n]

oh! I wonder why its not working properly in my AC? What could be causing that issue? a CM setting perhaps?

This is an old mod, right?
It seems to cause problems with newer CSPs.
In my case, with a specific mod, the driver appears without any problems in the cockpit,
but there is a problem where the driver does not appear when viewed from the outside using the free camera.
In lights-patch-v0.2.6 and later, there is a problem where the driver does not appear,
so I am currently using lights-patch-v0.2.5.
This may also be related to the issue.

 

[MasterFocus]

This is an old mod, right?
It seems to cause problems with newer CSPs.
In my case, with a specific mod, the driver appears without any problems in the cockpit,
but there is a problem where the driver does not appear when viewed from the outside using the free camera.
In lights-patch-v0.2.6 and later, there is a problem where the driver does not appear,
so I am currently using lights-patch-v0.2.5.
This may also be related to the issue.

Havent checked with older version, currently on the latest one.
This is not the new KN5 Loader causing it, disabling it didnt changed anything

 

[Rui n]

Havent checked with older version, currently on the latest one.
This is not the new KN5 Loader causing it, disabling it didnt changed anything

I don't know the reason why.
I've noticed some issues with older mods since lights-patch-v0.2.6.
I don't know if there's a problem with my CSP settings or if there's a problem with the items that were automatically checked after lights-patch-v0.2.6.
If there's no problem, I think it might be a good idea to reset to lights-patch-v0.2.5-preview1 and check.

 

[Crazydude]

Hey Crazydude, I have the same VRS wheelbase as you and when I tried the new FFB script I've started to get more of that ' white noise' high pitched type vibration in the FFB , did you notice this ?
And if you don't mind what slew rate and filter settings do you use in the VRS wheelbase software , I wonder if this is causing it
I usually use performance slew and quite 1 filter
Thanks for any suggestions

I use the 'Quiet' slew rate and currently using 'Legacy 2' or sometimes 'Responsive' smoothing filter. The noise can be attributed to a combination of slew rate, filter and damping. Ive found that the AC FFB signal is quite noisy depending on the tire used. Some tires translate more detail to the wheel vs others.I would get vibration/noise on some mods while sitting still - just the tire patch on the road even with quiet slew - would go away once the car starts rolling. I've tuned most of that out by limiting ffb under 1km/h in AC settings but with the Alternative FFB script I dont get the noise, but there is more road detail that comes through with the script. Try the quiet slew rate, and see how that feels. I only bump it up to 'Balanced' for iRacing.

Here's my current settings for VRS DFP with Alternative FFB:

 

[Peter Boese]

Assetto Corsa / extension / config / gui.ini


View attachment 1433291


Only, every csp rollback/update it reset itself to 0 so you have to go back and activate it again

Did you already try to manually put it in the gui.ini in /Documents/Assetto Corsa/cfg/extension/ ?
Is it default after a CSP update again or does it use your setting then?

 

[marc magnela]

That´s the best one.

Jaguar XJ220

Jaguar xj220Presented by mmw modding groupCredits:Model: Polyphony Digital3d: s2000ap1Sound: VilauConfig: s2000ap1Texture: s2000ap1Physics: GTR1994Skin: it'sDraikJoin our discord for more info: https://discord.gg/49cDSbUvaSUpdate (24/03/27):Minor fixes on emissive objectsAdded 2 interior color...

whistleblower39.gumroad.com

sure it's the best for everything, paid, encrypted and no LODS

 

[Fall Guy]

There is this one coming soon (?)

View attachment 1433317

Where´s that picture from? Looks quite good!

 

[Den_88]

There is this one coming soon (?)

View attachment 1433317

I don't have such a menu yet)

 

[shi]

Pinevale v1.1

Pinevale | shin956

Get more from shin956 on Patreon

www.patreon.com

View attachment 1433425
Fictional circuit in England.
Conversion from rFactor.

-CSP Recommended
-30 pit/start
-AI, cam

Credits & Thanks;
Original rFactor Track by R Soul
-Thank you for giving me permission

AC Converted by @shi (shin956)
logo.png and sections file by @Fanapryde
pit_lane.ai by TITI
Crowds texture by @Kniker97
Tree, marshall, cameraman and some textures by kunos
Test and Feedback by @Masscot

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.1 changelog;
Billboard textures by Mascot are now the default. (Thanks!)
Added BTCC 199x skin by STFWFL. (Thanks!)
Added Original Adboards skin.
Added Short layout.
Added new skidmarks.
Added new AI lines and sidelines.
Added animated flagmen and active airspace stuff by Mascot.
Changed start/finish gantry textures to those created by Mascot.
Changed fence and tree textures by Mascot.
Changed guardrail textures.
Updated grass textures.
Updated ext_config.ini.
Other minor fixes.

Pinevale v1.1
The link is in the quote.

v1.1 changelog;
Billboard textures by @Masscot are now the default. (Thanks!)
Added BTCC 199x skin by @StoffelWaffle . (Thanks!)
Added Original Adboards skin.
Added Short layout.
Added new skidmarks.
Added new AI lines and sidelines.
Added animated flagmen and active airspace stuff by @Masscot .
Changed start/finish gantry textures to those created by @Masscot .
Changed fence and tree textures by @Masscot .
Changed guardrail textures.
Updated grass textures.
Updated ext_config.ini.
Other minor fixes.

 

[LAFAYET47]

As a note, pit stop strategies do not work with the "New UI". It was a side project by a CSP contributor who no longer works on AC at all, much less this project. It is abandonware. Expect it to break further with newer and newer CSP versions, unless on the off chance someone picks up the source code from that original dev.

Source - one of the mods on the CSP Discord server.

See my thread over the past couple of years:

Assetto Corsa PC Mods General Discussion

And in "Part Deux" of problems with these new builds, does anyone know why the New UI is not displaying pit stop strategies? Just noticed this - was working before the release of the latest public CSP 0.2.0. Tried fiddling with the pit stop options in CM, no luck. New UI is completely blank...

www.gtplanet.net

I see it doesn´t let me check the lap times tab either. It looks a nice UI, but if I can´t see my times then it's a big no for me.

 

[MrHunt]

That´s the best one.

Jaguar XJ220

Jaguar xj220Presented by mmw modding groupCredits:Model: Polyphony Digital3d: s2000ap1Sound: VilauConfig: s2000ap1Texture: s2000ap1Physics: GTR1994Skin: it'sDraikJoin our discord for more info: https://discord.gg/49cDSbUvaSUpdate (24/03/27):Minor fixes on emissive objectsAdded 2 interior color...

whistleblower39.gumroad.com

View attachment 1433253

It is real CARBAGE, it looks pretty nice and thats the only good reason and it is "Encrypted"

 

[MasterFocus]

Did you already try to manually put it in the gui.ini in /Documents/Assetto Corsa/cfg/extension/ ?
Is it default after a CSP update again or does it use your setting then?

Its already in gui.ini, only it reset to 0 at each csp change and doesnt appear in the CM CSP menu

Where´s that picture from? Looks quite good!

Discord CSP channel, its in development

I don't have such a menu yet)

Its being developed as we speak (type/write/whatever)

 

[LAFAYET47]

View attachment 1433447

It is real CARBAGE, only good for the bin, it looks good, but is "Encrypted"

How can you check this info? I really need to do this with a lot of mods actually

 

[MasterFocus]

How can you check this info? I really need to do this with a lot of mods actually

 

[saXXXon]

How can you check this info? I really need to do this with a lot of mods actually

Click this a bunch of time to activate dev mode:

Click this for extra info

Then use this.

 

[rich64]

I use the 'Quiet' slew rate and currently using 'Legacy 2' or sometimes 'Responsive' smoothing filter. The noise can be attributed to a combination of slew rate, filter and damping. Ive found that the AC FFB signal is quite noisy depending on the tire used. Some tires translate more detail to the wheel vs others.I would get vibration/noise on some mods while sitting still - just the tire patch on the road even with quiet slew - would go away once the car starts rolling. I've tuned most of that out by limiting ffb under 1km/h in AC settings but with the Alternative FFB script I dont get the noise, but there is more road detail that comes through with the script. Try the quiet slew rate, and see how that feels. I only bump it up to 'Balanced' for iRacing.

Here's my current settings for VRS DFP with Alternative FFB:

View attachment 1433329

Thanks so much for the detailed reply , will give your suggestions a try
Thanks again

 

[andrea75]

I have the same problem apparently!!

Same problem here. Latest CSP and Pure

 

[Alx Hill]

This is an old mod, right?
It seems to cause problems with newer CSPs.
In my case, with a specific mod, the driver appears without any problems in the cockpit,
but there is a problem where the driver does not appear when viewed from the outside using the free camera.
In lights-patch-v0.2.6 and later, there is a problem where the driver does not appear,
so I am currently using lights-patch-v0.2.5.
This may also be related to the issue.

Go to :Custom Shaders Patch/Graphics Adjustments/Tweaks and deactivate "Draw driver after the car for external cameras".

 

[JV82]

WIP F1 2025 Crew Suite

 

[Tibi]

Hi Guys
Would anyone have a road version of the citroen DS 19
Would be amazing need for a project.
Just completed a Bathurst 1968 DS 21 but need the DS 19 for a earlier car from early 60s

Mod or model?

I found a free model:

Citroën DS 19 - Download Free 3D model by Jitske Bauwens (@Jitske_Bauwens)

High poly model of my dad’s favorite car. - Citroën DS 19 - Download Free 3D model by Jitske Bauwens (@Jitske_Bauwens)

sketchfab.com

 

[X90]

I see it doesn´t let me check the lap times tab either. It looks a nice UI, but if I can´t see my times then it's a big no for me.

Yes, the lap times tab also doesn't work properly - and neither does clicking on the driver to follow along on their onboard.

It has a slew of problems. All of these things used to work on (now much older) CSPs - I think 0.1.79 was the last one where all of these things work, though I could be wrong.

There is this one coming soon (?)

View attachment 1433317

I am unaware of what this is. It does look nice!

EDIT: I see it's from the CSP Discord - so probably legit. Good to hear - I did hear rumblings that someone wanted to pick up the project when I was in last in there a few months ago - which is why I mentioned the possibility.

Hopefully something comes of it.

 

[Alex Porter]

Havent checked with older version, currently on the latest one.
This is not the new KN5 Loader causing it, disabling it didnt changed anything

how do you disable the new KN5 loader?

 

[saXXXon]

how do you disable the new KN5 loader?

 

[Alex Porter]

Thanks for that, I will give it a go with that switched off.

Doesn't fix the issue.. its such a shame this car is having this issue as its a great mod. Also a shame VRC has abandoned it, especially considering a lot of their later stuff is of little to interest..

 

[arnould]

Since he used my version of the track as his base, I feel obligated to help him out. You're going to want to update the track with these files. They will eliminate the floating crowds where he removed the grandstand and make the pit lane windows transparent. If you prefer they are not transparent, don't extract the extension folder from the package.

lemans1955_update

There are not the 55 pits...???

 

[MasterFocus]

especially considering a lot of their later stuff is junk..

 

[racinjoe013]

There are not the 55 pits...???

Not my track. I just provided the files I updated to eliminate the floating crowds and floating sponsors. You still need his original 1955 track. The link is one or two pages back.

 

[Fall Guy]

Doesn't fix the issue.. its such a shame this car is having this issue as its a great mod. Also a shame VRC has abandoned it, especially considering a lot of their later stuff is junk..

Most of the CSP settings can be altered live while playing. So maybe you can try to watch a replay and disable some settings which are enabled and see if it brings the missing bodywork back, even disabling a whole module is possible.

 

[marc magnela]

View attachment 1433447

It is real CARBAGE, it looks pretty nice and thats the only good reason and it is "Encrypted"

1327 triangles, perfect for the track with 55 pits to make your brand new 5090 sweat or burn out the connector.

 

[Alex Porter]

ok so probably a bit harsh words on my part so I will rephrase.. especially considering most of their later stuff I have no interest in.