Assetto Corsa PC Mods General DiscussionPC

[Masscot]

That "doors open" on the Nissan R380 is present for me in ANY of the CSP previews, on ANY of the R380s (Bazza, Legion et al).
It's related to the door close animation that happens when you get in the car. I fixed it by disabling-by-renaming the ksanim.
I realise that might be a hammer to fix something simple, but I can only work within my limited skillset, right?

Do you have the Opel Kadett Blitz RHD?
That car just crashes CM when attempting a CSP preview.
It's this car (shown with a non-CSP preview):


Edit: never mind, I redownloaded/reinstalled the car and everything is now fine with the CSP preview. My original car must have been Trumped (corrupt).



Edit 2: lol, just noticed the front left wheel.
Redone using the 'no-steer' preview variant and the suspension is now normal.

 

[MasterFocus]

Do you have the Opel Kadett Blitz RHD?
That car just crashes CM when attempting a CSP preview.
It's this car (shown with a non-CSP preview):
View attachment 1468763

Edit: never mind, I redownloaded/reinstalled the car and everything is now fine with the CSP preview. My original car must have been Trumped (corrupt).

View attachment 1468779

Edit 2: lol, just noticed the front left wheel.
Redone using the 'no-steer' preview variant and the suspension is now normal.

View attachment 1468780

Works as intented on my side

 

[ninezeroniner]

That "doors open" on the Nissan R380 is present for me in ANY of the CSP previews, on ANY of the R380s (Bazza, Legion et al).
It's related to the door close animation that happens when you get in the car. I fixed it by disabling-by-renaming the ksanim.
I realise that might be a hammer to fix something simple, but I can only work within my limited skillset, right?

I call that class.

 

[Masscot]

Is it safe to assume that CSP previews (with the front wheels turned) expose mods with janky physics, specifically squiffy suspension geometry?

 

[Fall Guy]

Is it safe to assume that CSP previews (with the front wheels turned) expose mods with janky physics, specifically squiffy suspension geometry?

Do you have these kind of issues really with the latest csp 0.12p1? Have you tried using my csp preset I sent you? Same issues? I wonder what´s wrong in your settings since I don´t experience these stuff you report.

 

[puerk0spin]

I'm sad because this morning I explained a problem that doesn't allow me to play this game anymore, and it doesn't seem to care to anyone.
Should I be friend of someone here to get an answer?

 

[Masscot]

Do you have these kind of issues really with the latest csp 0.12p1? Have you tried using my csp preset I sent you? Same issues? I wonder what´s wrong in your settings since I don´t experience these stuff you report.

Yeah, it's weird. Only a few cars get affected. Might be the new kn5 loader or something.

 

[RicME85]

I'm sad because this morning I explained a problem that doesn't allow me to play this game anymore, and it doesn't seem to care to anyone.
Should I be friend of someone here to get an answer?

Did you go to my documents and rename the assetto corsa directory to something like Assetto Corsa - Backup and then trying again (CM will rebuild the folder with default settings)

 

[Sebviitel]

maybe just me but is it odd to anyone else that skins for RSS 2025 F1 car are no where to be found?

did usual skinning group just move on from AC or is this RSS thing only.

like when VRC released F1 2024 all the skins got made fast.

 

[axydraul]

Can you try Set CSP Settings→ General Patch Settings→ CPU optimizations→ Chunks optimizations to Basic

looks like a similar problem to which Shin gave this solution?

I've got already that setting to basic

 

[DavidDGA]

2005 ALMS - Porsche skinpack for RSS GTN Darche 96

This skinpack is a collaboration with @veloqx , which made Flying Lizards, BAM!, J3 Racing and ZIP Racing, while, on the other hand,I made Alex Jobs, Petersen / White Lightning, TRG and IN2 Racing. That means all Porsches done with all its livery variations during the season, and a mostly complete grid to be driven in AC.

2005 ALMS - Porsche Skinpack (Part 1)

Here is part 1 of the Porsche 996 GT3 RSR that ran at ALMS in 2005. This season gave us great battles and variety, especially in the GT1 category, with cars like the Corvette C6R, Aston Martin DBR9, Saleen S7R, Viper GTS-R, or even a modified...

www.overtake.gg

2005 Alms Porsche Skinpack (Part 2)

This is a collaboration with @DavidDGA All skins for RSS Darche #34 ZIP Racing #43 BAM Racing #44 and 45 Lizard MS #78 and #79 J3 Racing Alex Job, Petersen White Lightning, IN2 Racing and TRG entries you can find here...

www.overtake.gg

Enjoy, hope you like it

 

[RicME85]

maybe just me but is it odd to anyone else that skins for RSS 2025 F1 car are no where to be found?

did usual skinning group just move on from AC or is this RSS thing only.

like when VRC released F1 2024 all the skins got made fast.

Patience.

APX-GP livery has gone up this evening - https://www.overtake.gg/downloads/apx-gp-skin-for-rss-fha-2025.78950/

 

[Moor1804]

What did you change?

I don't remember... I will check

 

[Masscot]

2005 ALMS - Porsche skinpack for RSS GTN Darche 96

This skinpack is a collaboration with @veloqx , which made Flying Lizards, BAM!, J3 Racing and ZIP Racing, while, on the other hand,I made Alex Jobs, Petersen / White Lightning, TRG and IN2 Racing. That means all Porsches done with all its livery variations during the season, and a mostly complete grid to be driven in AC.

2005 ALMS - Porsche Skinpack (Part 1)

Here is part 1 of the Porsche 996 GT3 RSR that ran at ALMS in 2005. This season gave us great battles and variety, especially in the GT1 category, with cars like the Corvette C6R, Aston Martin DBR9, Saleen S7R, Viper GTS-R, or even a modified...

www.overtake.gg

2005 Alms Porsche Skinpack (Part 2)

This is a collaboration with @DavidDGA All skins for RSS Darche #34 ZIP Racing #43 BAM Racing #44 and 45 Lizard MS #78 and #79 J3 Racing Alex Job, Petersen White Lightning, IN2 Racing and TRG entries you can find here...

www.overtake.gg

View attachment 1468818

Enjoy, hope you like it

Love that car, such fun in spec races. Thanks for these!

 

[BruceD]

Is it safe to assume that CSP previews (with the front wheels turned) expose mods with janky physics, specifically squiffy suspension geometry?

Anything in either animated suspension or the suspension.ini file that's not set correctly will stick out in those previews. But I've never seen them get as wild as yours have.

 

[giorgos_nes]

* please ignore *

 

[Apocalypse211]

Has anyone had issues with AI cars bouncing and flipping in the pits. It seems crazy i know! I am launching a custom Race through CM and all the cars and track are mods with no previous issues. I added Legions Chevron B16s to the grid and they started bouncing on their suspensions before starting to flip end over end and the game crashes. I’ve tried adjusted the suspensions in the data file but it hasn’t solved it. If anyone is using Legions Chevron B16s can you tell me what version of CSP you are using?

Yes. But this must be a Content Manager issue as it happens also on 0.1.79 and it never, ever happened before.

 

[puerk0spin]

Did you go to my documents and rename the assetto corsa directory to something like Assetto Corsa - Backup and then trying again (CM will rebuild the folder with default settings)

OK, thank you Sir.

Just one question: What kind of stuff can I loose doing it that way? Maybe is not important, but only to be sure.

 

[RicME85]

OK, thank you Sir.

Just one question: What kind of stuff can I loose doing it that way? Maybe is not important, but only to be sure.

You wont lose anything as you are keeping all the settings safe by renaming the folder. If you do this and find everything works as it should then you can move the individual files one by one until you find the one that breaks things again.

 

[Ken134]

Hi All. I have a strange problem. I get weird lollipops and objects above my car when starting from the pits. Please see photos. Can any body help please. On latest CSP and Pure LCS. Many thanks. I play in VR but it’s the same on flat screen.

 

[Paintbox]

That "doors open" on the Nissan R380 is present for me in ANY of the CSP previews, on ANY of the R380s (Bazza, Legion et al).
It's related to the door close animation that happens when you get in the car. I fixed it by disabling-by-renaming the ksanim.
I realise that might be a hammer to fix something simple, but I can only work within my limited skillset, right?

Have you tried unticking car doors options within car parameters of the preview? Whenever I get any like that I usually just untick some or all the options till its sorted.

Example below of R380, left door is unticked - right ticked as per car in preview. When both unticked, doors both close and I can update my previews.

 

[24H]

the doors are closed with the CSP previews?

 

[Longmont]

Hi All. I have a strange problem. I get weird lollipops and objects above my car when starting from the pits. Please see photos. Can any body help please. On latest CSP and Pure LCS. Many thanks. I play in VR but it’s the same on flat screen.

i think those are from the rss f1 alpine. i think they got textures that replace the og lollipop man with that

 

[Kurt Woods]

maybe just me but is it odd to anyone else that skins for RSS 2025 F1 car are no where to be found?

did usual skinning group just move on from AC or is this RSS thing only.

like when VRC released F1 2024 all the skins got made fast.

@Sebviitel
I notice a lack of available skins for numerous series, but I think the skinners may have there own patreon page or discord channel or perhaps moved on to LMU, but for sure they aren't up for download like in the past few seasons.

 

[SoulMaTriX]

Have you tried unticking car doors options within car parameters of the preview? Whenever I get any like that I usually just untick some or all the options till its sorted.

Example below of R380, left door is unticked - right ticked as per car in preview. When both unticked, doors both close and I can update my previews.

View attachment 1468853

I was just about to state the same as I just noticed this as well. I guess we have a new feature for previews.

 

[andrevr]

@Paintbox
Thanks for the suggestion 👍🏻 and it’s 100% correct for standard previews made using CM.

However, If I use the “use CSP to render final preview” option, then all the R380s do the “doors open” trick as in @Masscot ’s image, despite any of my efforts to check/uncheck items in that list.

I prefer the “CSP” previews as they deal with the encryption issue, and also show the effects of any added/removed items via the skin’s ext_config.ini

 

[Rodger Davies]

Thanks for the suggestion 👍🏻 and it’s 100% correct for standard previews made using CM.

However, If I use the “use CSP to render final preview” option, then all the R380s do the “doors open” trick as in @Masscot ’s image, despite any of my efforts to check/uncheck items in that list.

I prefer the “CSP” previews as they deal with the encryption issue, and also show the effects of any added/removed items via the skin’s ext_config.ini

I'm not sure why CSP previews do this with the car - you can see the default state has them closed in the normal CM Showroom.

However, if you want a quick fix for this, just remove the animation file from the folder when you generate the previews and then drop them back in when you're done. Haven't tried it but should work.

 

[ninezeroniner]

Small issue with the sweet rj_doningtonpark2023.
Crews are on the wrong side of the pits, on the right, gingerly waiting to get un-legged by the entering/exiting cars.

 

[Ken134]

i think those are from the rss f1 alpine. i think they got textures that replace the og lollipop man with that

Hi. Thanks. Any idea how to get it back to normal because it happens when I use all cars. Cheers. All sorted reinstalled the original 3d objects. Back to normal.

 

[andrevr]

I'm not sure why CSP previews do this with the car - you can see the default state has them closed in the normal CM Showroom.

However, if you want a quick fix for this, just remove the animation file from the folder when you generate the previews and then drop them back in when you're done. Haven't tried it but should work.

Thanks Rodger... That's essentially what I did in the end 👍
If I had to guess, I'd say that the animation is trying to run as CSP loads AC to make the shot, and there's a tiny delay, so the doors appear half closed.
Why it doesn't do the same on ALL door-close animations? Timing? Keyframes? Who knows? 😊

In fact, the more I think about this, @Masscot @Fall Guy, the more I'm liking the animations (steer, suspension, doors etc, etc) as the culprit in some/most/all of this. Differences in timing, PC horsepower, other-process load yada-yada, could easily explain the randomised results?