Assetto Corsa PC Mods General DiscussionPC

[Den_88]

GT3 specs race car. Here.
View attachment 1453482

does the car in the foreground have a problem with glass shaders or textures?

 

[Pilot3331]

does the car in the foreground have a problem with glass shaders or textures?

Depends on csp version. Tested with 0.2.8 public no problems.

 

[racealot]

Tokachi Int. Speedway (GP layout) Replay Cams

...and since Shins' last version has been pulled via request - here are some action-cams to complement the experience.

So glad to have had the opportunity to test it. It's also a really good layout for the M3 NSPEC.

DOWNLOAD-CAMS

---

For all the IMSA fans, here's another grid filler for your Laguna Seca grid, the #9 Pfaff Motul Lambo. I hadn't seen this one done as yet so I thought I'd have a stab at it. It's for the rss_gtm_lanzo_v10_evo2, enjoy!
https://mega.nz/file/etxH0Tob#c344z3zo1svCR8o8d88oGQ6ZhdlpcuddlftU0cOVCGk
View attachment 1453306
View attachment 1453308

Thanks for the livery Mr Woods, it's a great addition. Thought to also mention there's one file that is grossly overweight when compared against the actual livery-file.

It may have missed the compression-process - here's a lighter-version for those HDD/SDD space-saving players.

Well, it's not only space-saving, positive also for higher-FPS ingame.

Just rename it to it's original format by removing '.txt'

 

[Kurt Woods]

By the way... has no one told you yet that these photos are simply SPECTACULAR? 🥵

@Perco Lospa I just retired my old 3770k for a new AMD7700 so now my 2070 is loving it, thanks!

 

[GN_Bullit]

Hello, I'm using CSP 2.10 preview and I can't use my muscle cars anymore, in any game mode. They accelerate, burn tires, generate smoke, but they almost don't move, they don't go over 10km/h. Any ideas? tks in advance

 

[Den_88]

Hello, I'm using CSP 2.10 preview and I can't use my muscle cars anymore, in any game mode. They accelerate, burn tires, generate smoke, but they almost don't move, they don't go over 10km/h. Any ideas? tks in advance

This helped me, change the mode "awake phisics in pits"

 

[MisterWaffles]

Do RSS encrypt skins now? I recently redownloaded the latest version of the RSS GT pack and I really like this purple bull skin for the Murcielago R-GT, but the fake logos bother me. I delete pretty much every skin except this one just because of the graphics.

However, I can't seem to find the base textures so I can edit the livery to have more realistic logos.

I've never seen that before on a skin.

Perhaps someone has an earlier version with the map able to be seen/edited?

 

[GN_Bullit]

View attachment 1453546
This helped me, change the mode "awake phisics in pits"

Solved. The same here. Thank u very much, mate.

 

[TabsGaming42]

Hey everyone, Though i'd pop in and give you lot this thing. Seeing as an certain leech going under the name First "studio" Race has this exact same model up for sale on two different AC related stores i thought i'd just share the exact same model from the exact same game.

It's not perfect, The textures needs work and well the physics are just imaginary and is re-using the one from the C7.R by Kunos.

Link here, Takes you to Mega. or just download it off here on GT Planet
View attachment 1453332
View attachment 1453333
It comes with some FIA GT 2010 skins.

Credits:
Conversion: Me
3D model: Raceroom Racing Experience
Sounds: Kunos
Skins: Unknown (They were included with the files from the guy who had uploaded the files on discord)

Feel free to improve it or do whatever you want with it. No need to credit. Just want this car to stop being hidden behind a paywall.

Thanks for stole my work..
" Conversion: Me "
Lmao

 

[FrustratedUse]

Thanks for stole my work..
" Conversion: Me "
Lmao

Didn't know we had an KW Studios employee in here.

 

[MisterWaffles]

Also has anyone been able to update the Pagani Zonda GR (the old early 2000s GTS spec car) to be quicker and more balanced against the RSS GT cars?

 

[axydraul]

Does anyone knows if there is a way to have audio reverb into the tunnel in Monaco 2020 track?

 

[ninezeroniner]

Also has anyone been able to update the Pagani Zonda GR (the old early 2000s GTS spec car) to be quicker and more balanced against the RSS GT cars?

Not strictly related, I know.
But there's a "what if" reworked GT1 incoming that should be RSS compatible.

 

[Masscot]

Donington Park（from R3E maybe）
Converted from rfactor, but the model seems come from RaceRoom Racing Experience, I'm not sure.This mod features more complete meshes and more realistic slopes than the exit version donington 2018 and 2023.
.
All the work made by me.
CSP 1.79 or higher needed.
View attachment 1453065
View attachment 1453066

View attachment 1453067
LINK:https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
File:donington_park_es.zip

Thanks for this, much appreciated.
Is there any chance the road edges could be smoothed out so they are continuous curves, and not facetted?
I think @shi has a good technique for achieving this.

 

[kpcart]

👍 I’ve been a fan and constant user of ASR’s cars for some years now and very active on their Discord.
I drive their cars all the time. I know you didn’t know that, I’m just stating for the record.

Good to see others recognising ASR.

I still desire that RSS McLaren though.

I am suprised many F1 fans still l havent tried ASR's cars and many assume they are bad like simdream or acfl, but they really are top class. expensive but...

 

[gccastoldi]

This was my pack of skins and car adaptations to recreate one of the races of the "BUA F-Ford Brazil Tournament 1970").

I used an F-Ford model as the base car... and made some adaptations (to make each model slightly different) and with an independent "directory" for each Formula-Ford.

- Lotus, Lola, Hawke, Macon, Merlyn, Royale, Titan

If anyone is interested, I'll share it privately...

RACE

Hi,
Are this mods for assetto corsa?
I m interested about...let me know

Thanks

 

[vityaz]

https://www.gtplanet.net/forum/threads/porsche-911-gt3-r-2019-991-2.432117/post-14459583

 

[Jeroen V]

I am suprised many F1 fans still l havent tried ASR's cars and many assume they are bad like simdream or acfl, but they really are top class. expensive but...

Well, I have some ('90 (3 cars), '91, '92, '20 and '23) and I do like them. Graphics are good (4K here with a bit of 2x SGSSAA added). Especially the sounds are really enjoyable. My 2 cents at least.

 

[Shokeus]

In progress ...

 

[arnould]

Hi,
Are this mods for assetto corsa?
I m interested about...let me know

Thanks

It's looks very nice. I am interested...

 

[PedroBLR]

 

[Aldo Raine]

I used to have the same thing, and it's a pain trying to get complete none-flickering (impossible maybe)...

I played around w the settings and I'm not disturbed anymore by the shadows. I will list here the settings I settled with and are related to shadows.

Give them a try , but all systems are different ... could be what works for me does not mean it's good for you
(I run an NVIDIA 4080s on a Quest 3 w Link cable, you might have a whole different setup...).

settings AC VIDEO:
(I also have shadow res on 6144x6144 in )
View attachment 1453089


Settings CSP - General Patch Settings:
View attachment 1453086

Settings CSP - GRAPHICS ADJUSTMENTS,
View attachment 1453085

Settings CSP - Smart Shadows:
View attachment 1453088

In NVIDIA settings:
View attachment 1453090
(some say it's better to turn Anisotropic filtering on in here , and OFF in Assetto ...

View attachment 1453091
play around w these and see what is best for you)

hope this helps ...
Good luck!

Thanks for the advice, I tried your parameters but unfortunately as you said, what maybe works for one is not good for another, in fact..

I think that there is nothing at the moment that can improve the lod of the shadows or in any case, a truly effective antialiasing on distant shadows, perhaps only Ilja could implement some solution in the future.

Let's hope, thanks for your time mate.

 

[graveltrap]

Physics Update to Kunos 991.2 GT3 Cup (installs as a new car).

Requires latest public version of CSP.

gt_porsche_991.2_gt3_cup

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Please make a clean installation - Kunos cup car skins will work with this car, just copy paste to the skins folder

Changes from the last version: Updated spring rates based on new motion ratios from 918 RS Clubsport and 991.2 GT3 R / Corrected helper spring rates / adjusted damper travel ranges / increased brake pedal force slightly / opened setting ranges /

Sound by ACfan

As before, my eyes arent so good, and I use HDR so brightness of things may be off for you!

 

[sDmD13]

For all the IMSA fans, here's another grid filler for your Laguna Seca grid, the #9 Pfaff Motul Lambo. I hadn't seen this one done as yet so I thought I'd have a stab at it. It's for the rss_gtm_lanzo_v10_evo2, enjoy!
https://mega.nz/file/etxH0Tob#c344z3zo1svCR8o8d88oGQ6ZhdlpcuddlftU0cOVCGk
View attachment 1453306
View attachment 1453308

its very nice but i cant create a preview picture

 

[Frank25]

Thanks for the advice, I tried your parameters but unfortunately as you said, what maybe works for one is not good for another, in fact..

I think that there is nothing at the moment that can improve the lod of the shadows or in any case, a truly effective antialiasing on distant shadows, perhaps only Ilja could implement some solution in the future.

Let's hope, thanks for your time mate.

To improve the shadows in VR, I deactivated the "Automatic splits" of the lods of the shadows and adjusted it manually.
I changed the values of "Distances of interior" (in metre) to "1.3, 160, 400". If you increase the distances of the shadows for lod2 and lod3, you will reduce the overall quality and sharpness of the shadows, BUT this will help to reduce the flickering and the shadows in the distance won't pop-in anymore. The Nordschleife is a good track to test it. In the AC settings I use a "Shadows resolution" of 4096x4096.

 

[GN_Bullit]

Physics Update to Kunos 991.2 GT3 Cup (installs as a new car).

Requires latest public version of CSP.

gt_porsche_991.2_gt3_cup

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Please make a clean installation - Kunos cup car skins will work with this car, just copy paste to the skins folder

Changes from the last version: Updated spring rates based on new motion ratios from 918 RS Clubsport and 991.2 GT3 R / Corrected helper spring rates / adjusted damper travel ranges / increased brake pedal force slightly / opened setting ranges /

Sound by ACfan

As before, my eyes arent so good, and I use HDR so brightness of things may be off for you!

Excellent work. Tks 4 share.

 

[Quikslvr]

its very nice but i cant create a preview picture

Same here...and CM freezes when I try to view the skin in Showroom.

 

[sDmD13]

question, i am trying to get my mods sorted and checking them if they work. atm i am trying to drtive the v8 vantage from opperslang, but i cant manage to drive it it, i go on the trothle the car instantly turns off

 

[MasterFocus]

question, i am trying to get my mods sorted and checking them if they work. atm i am trying to drtive the v8 vantage from opperslang, but i cant manage to drive it it, i go on the trothle the car instantly turns off

Uncheck "Allow cars to be stalled"

 

[xezez]

In today's episode of 'CSP is Driving Me Mad':

I use the CSP LUA FFB app to set my FFB levels, but have an ongoing issue where the FFB continually creeps up in value. Sometimes after a few laps, the FFB ends up being several percent higher in strength than what I originally set it at.

Has anyone else seen this problem and/or found a solution for it?