Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 158,810 comments
  • 52,567,302 views
shi
Barcelona Street Circuit v1.0
View attachment 1541806View attachment 1541807
A fictional street circuit in Spain.

-CSP recommended
-2 layouts (Forward/ Reverse)
-28 pit/start
-AI, cam

Credits & Thanks;
GT Racing 2 Track by Gameloft, Chipicao
- Found the file on the ACMP Discord (The_Unpunished)

AC Converted by shin956
Alt Adboards texture by Mascot
Crowds texture by Kniker97
marshall and some textures by kunos
Test and Feedback by Breathe, Mascot

Enjoy.
GT Racing 2 was a goated game.
 
Last edited:
Hi.
Big update for Alfa 75 IMSA.
Thank You all for feedback, it was used to make a better version of this fantastic car.
You will find it Here.
View attachment 1541709
Hi,

I downloaded this gorgeous car, but unfortunately it doesn't seem to be optimized. Even in single player, it doesn't go above 20 fps. Maybe it's my problem. Can you help me?

Thanks
 
Hi,

I downloaded this gorgeous car, but unfortunately it doesn't seem to be optimized. Even in single player, it doesn't go above 20 fps. Maybe it's my problem. Can you help me?

Thanks
Hi. This is not a heavy graphic car and there is no lua scripts running with it. It is really strange You have performance problems.
Can You temporarily remove extension folder from cars installation folder and see if it makes any difference?
You can contact me with PM to reduce spam here.
 
Last edited:
Hi.
Can You please elaborate why this car needs more grip? I dont think, if car a does not do what car b does, is good example. Just out of curiosity what car are You comparing it to?
It is balanced to have about same level of grip as kunos dtm hard tires have, in fact a little more actually.
Nothing wrong, i just had not set it up correctly, once i fiddled with the setup in the menu i got it driving all good.

i jumped the gun a little that's all.
 
Nothing wrong, i just had not set it up correctly, once i fiddled with the setup in the menu i got it driving all good.

i jumped the gun a little that's all.
Hmm strange default setup is not perfect, but should be manageable. Did You change default fuel from 30 to 29 and it started to behave? :)
 
Hmm strange default setup is not perfect, but should be manageable. Did You change default fuel from 30 to 29 and it started to behave? :)
No is that a known issue?, i changed the spring rate to a little lower on the back and a bit higher on the front, it stopped the car rotating to easily, i also added negative camber to the rear as default is 0. It even stopped the weird "vibration" when going over a curb whilst sliding...........probably becasue the car doesn't slide to much now like before.
 
Last edited:
No is that a known issue?, i changed the spring rate to a little lower on the back and a bit higher on the front, it stopped the car rotating to easily, i also added negative camber to the rear as default is 0. It even stopped the weird "vibration" when going over a curb whilst sliding...........probably becasue the car doesn't slide to much now like before.
It is not known issue. It is a joke sentence followed by friendly smiley face as an attempt to return someone to their common senses. Cause ranting in bold about mod that was made by someone making an effort and sharing it for free, is a bit intense.
 
Well, since we're on the subject, I'd like to mention that I'm also having some issues with both Alfa 75s.

I already mentioned that driving alone I have no problems, but when I load "Trackday" (with both 75s), the loading screen gets stuck, it struggles to start, the image loads in fits, the weather aspect changes several times before it stabilizes, and even then, the PC struggles to maintain 50 or 60 fps, when normally with other mods and under the same conditions it reaches 90 or 100 fps.

And in my case, since I usually drive the cars with stock settings (because I basically have no idea how to set), it's true that the IMSA version has a tendency to lose the rear very easily; it's tricky to drive fast. I suppose that's how it will be in real life, with that power and without ABS or traction control, but even so, it's true that it's very tricky to drive, or at least, for clumsy drivers like me.

I'll try the suggestions you've shared in the last few messages, and see if I can improve anything.
 
Last edited:
Well, since we're on the subject, I'd like to mention that I'm also having some issues with both Alfa 75s.

I already mentioned that driving alone I have no problems, but when I load "Trackday" (with both 75s), the loading screen gets stuck, it struggles to start, the image loads in fits, the weather aspect changes several times before it stabilizes, and even then, the PC struggles to maintain 50 or 60 fps, when normally with other mods and under the same conditions it reaches 90 or 100 fps.

And in my case, since I usually drive the cars with stock settings (because I basically have no idea how to set), it's true that the IMSA version has a tendency to lose the very easily; it's tricky to drive fast. I suppose that's how it will be in real life, with that power and without ABS or traction control, but even so, it's true that it's very tricky to drive, or at least, for clumsy drivers like me.

I'll try the suggestions you've shared in the last few messages, and see if I can improve anything.
HI.
Performance drops will be investigated i suspect something in extension config.
It is not an easy car for shure. If You are losing it on corner exit, that would be normal situation for a high torque turbo car on vintage compound.
 
Last edited:
Hi. This is not a heavy graphic car and there is no lua scripts running with it. It is really strange You have performance problems.
Can You temporarily remove extension folder from cars installation folder and see if it makes any difference?
You can contact me with PM to reduce spam here.
I'm sharing this for anyone experiencing the same problem. Deleting the extension.ini file will return everything to normal.

More cars of this quality, please!

Thanks
 
Hi.
For those who had poor performance with both @k_p Alfa 75 and IMSA Alfa.
Links are updated with performance fix.
MORE FPS!!!
Screenshot 2026-06-02 212444.webp
 
Dear friends, for the past few days, whenever I open the CM Gallery to look at a car, my computer starts resetting. My graphics card is a 9070xt and my processor is a 5700x3d. Has anyone else experienced the same issue using an AMD graphics card?
I'm answering my own question. My MSI MeG ai1300p watt power supply causes my computer to reset when it reaches around 550 watts. I think the power supply is broken.
 
Last edited:
@Pilot3331, I can't find a link on those pages.... Links to install some browser, links for technical data, but no car... (IMSA)
 
Last edited:
@Pilot3331, I can't find a link on those pages.... Links to install some browser, links for technical data, but no car... (IMSA)
Hi.
There is no link for a 🚗. There is only link for a bunch of digital files, that attempts to simulate physicaly and visually certain car model in specific simulation program.
 
Last edited:
Thank. I'll include them and update the car ... again. :cheers:
@Pfalzdriver : This constant updating of your magnificent M1 Procar will make it better each time and beloved in this community. Little corrections make for sublime mod. Whether it finally be v3.99 in the end, I (and all other for that matter, I'm sure) are very thankful for your dedicated and hard work!
 
I'm answering my own question. My MSI MeG ai1300p watt power supply causes my computer to reset when it reaches around 550 watts. I think the power supply is broken.
One more update. It's likely the power cable that's faulty. The power supply itself is fine.
 
@Pfalzdriver : This constant updating of your magnificent M1 Procar will make it better each time and beloved in this community. Little corrections make for sublime mod. Whether it finally be v3.99 in the end, I (and all other for that matter, I'm sure) are very thankful for your dedicated and hard work!
I join in thanking @Pfalzdriver (and the rest of the illustrious people involved in the BMW M1) and also want to extend my thanks to @Pilot3331 and his improvements to the two Alfa Turbo 75 Evoluzione; these cars have finally stopped producing the strange behavior when loading the session and now don't absorb PC resources like Monica Bellucci sucks souls in "Beetlejuice Beetlejuice".

Hats off for modders who care about improving their mods over time, instead of abandoning them to their fate.
... i changed the spring rate to a little lower on the back and a bit higher on the front, it stopped the car rotating to easily, i also added negative camber to the rear as default is 0...
Would you be so kind as to share the exact settings you used? The IMSA is still untamable for me with the stock setup, which also seems to have an unbalanced setting: the compression on the left front shock reads 2900, and on the right, 2406, although the rest of the measurements are the same on both sides.

And one last detail: if anyone find that the IMSA version's windshield banner reflects annoying the road markings, can add these lines to the end of ext_config.ini...

[SHADER_REPLACEMENT_...]
MATERIALS = gls_windsheild_#19191966.002
SHADER= ksPerPixel
 
I join in thanking @Pfalzdriver (and the rest of the illustrious people involved in the BMW M1) and also want to extend my thanks to @Pilot3331 and his improvements to the two Alfa Turbo 75 Evoluzione; these cars have finally stopped producing the strange behavior when loading the session and now don't absorb PC resources like Monica Bellucci sucks souls in "Beetlejuice Beetlejuice".

Hats off for modders who care about improving their mods over time, instead of abandoning them to their fate.

Would you be so kind as to share the exact settings you used? The IMSA is still untamable for me with the stock setup, which also seems to have an unbalanced setting: the compression on the left front shock reads 2900, and on the right, 2406, although the rest of the measurements are the same on both sides.

And one last detail: if anyone find that the IMSA version's windshield banner reflects annoying the road markings, can add these lines to the end of ext_config.ini...

[SHADER_REPLACEMENT_...]
MATERIALS = gls_windsheild_#19191966.002
SHADER= ksPerPixel
Hi.
Appreciate Your sense of humor and fix You made for banner.
Well spotted damper inequality. It was missed issue in setup.
New link updated with Your banner fix and damper setup fix.
Hopefully this will help to tame this monster. :D
Alfa 75 IMSA
 
Last edited:
Hi.
Appreciate Your sense of humor and fix You made for banner.
Well spotted damper inequality. It was missed issue in setup.
New link updated with Your banner fix and damper setup fix.
Hopefully this will help to tame this monster. :D
Alfa 75 IMSA
If you don't want to see the driver's helmet while looking at the Alfa 74 IMSA in the interior view, add this line to the data, driver3d file:

[HIDE_OBJECT_2]
NAME=model

I also suggest setting the low front grille in Alpha blending

also a temporary solution, darken the underside of the car to make those tie rods hanging in the air less noticeable, the ideal would be to attach them to something:

__custom_showroom_1780518930.webp
 
Last edited:
If you don't want to see the driver's helmet while looking at the Alfa 74 IMSA in the interior view, add this line to the data, driver3d file:

[HIDE_OBJECT_2]
NAME=model

I also suggest setting the low front grille in Alpha blending

also a temporary solution, darken the underside of the car to make those tie rods hanging in the air less noticeable, the ideal would be to attach them to something:

View attachment 1542056
Hi.
All thing mentioned are now fixed. Link updated with all fixes made by @Kwara and @Perico Lospa . And as a bonus car now has correct amount of wipers.
 
Last edited:
shi
Montreal 1994 - 1995 v1.4

View attachment 1419707
Circuit Gilles Villeneuve with 1994 - 1995 layout.
Conversion from F1 Challenge.

-CSP recommended
-2 layouts (Only change billboards)
-38 pit/start
-AI, cam

NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.

Credits & Thanks;
F1 Challenge Track by dmarques
(Based on the default F1C circuit with major upgrades to buildings and surroundings)

Terms Of Use; (F1C)
Enjoy this mod to the fullest, that's all. If you want to convert or use this
as a base to create other cars, you're welcome in doing so as long as the
appropriate credit is given to the respective authors of the files you are
using. You can find all authors in this file

AC converted by @shi (shin956)
Pit tent from F1-S-R's 1994 Track Pack
AI and sidelines by IMEAN
logo.png and Sections file by @Fanapryde
Crowds texture by @Kniker97
cone and some textures by kunos
Test and Feedback by @Breathe

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.1 changelog;
Removed broken trees.
The billboard logo is now closer to the video of the time. (Both layouts)
Updated ext_config.ini. (video screen)
some minor fixes.

v1.2 changelog;
Added Penalty to Chicane. (Suggestion by Apocalypse211. Thanks.)
Fixed missing pit building meshes.
Updated ai_hints.ini, semaphore.ini, groove.ini. and cameras.ini.
Updated ext_config.ini.

v1.3 changelog;
Updated tree textures.
Updated crew.ini.
Fixed Crowds texture.

v1.4 changelog;
Updated the road sign and background textures. (Using AI)
Fixed adboard uv mapping.
Fixed pit position.
Fixed the floating objects.
Other minor fixes.

Montreal 1994 - 1995 v1.4
https://www.patreon.com/posts/montreal-1994-119708283
v1.4 changelog;
Updated the road sign and background textures. (Using AI)
Fixed adboard uv mapping.
Fixed pit position.
Fixed the floating objects.
Other minor fixes.
shi
Montreal 1996 v1.2
View attachment 1469153
Circuit Gilles Villeneuve with 1996 layout.
Conversion from F1 Challenge.

-CSP recommended
-38 pit/start
-AI, cam

Credits & Thanks;
F1 Challenge Track by dmarques
(Based on the default F1C circuit with major upgrades to buildings and surroundings)

Terms Of Use; (F1C)
Enjoy this mod to the fullest, that's all. If you want to convert or use this
as a base to create other cars, you're welcome in doing so as long as the
appropriate credit is given to the respective authors of the files you are
using. You can find all authors in this file

AC converted by @shi (shin956)
AI line and sidelines by @IMEAN
Pit tent from F1-S-R's 1994 Track Pack (rF1)
logo.png by @Fanapryde
Crowds texture by @Kniker97
some textures by kunos

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Fixed a one-sided object on the stand.
Even when CSP settings → General Patch Settings → CPU optimizations → Chunks optimizations are set to Advanced, ground objects are no longer hidden. (Tested with CSP 0.2.12-preview1.)

v1.1 changelog;
Updated tree textures.
Updated crew.ini.
Fixed Crowds texture.

v1.2 changelog;
Updated the road sign and background textures. (Using AI)
Fixed pit position.
Fixed pit building meshes.
Fixed the floating objects.
Other minor fixes.

Montreal 1996 v1.2
https://www.patreon.com/posts/montreal-1996-135460117
v1.2 changelog;
Updated the road sign and background textures. (Using AI)
Fixed pit position.
Fixed pit building meshes.
Fixed the floating objects.
Other minor fixes.
Screenshot_ask_baleno99_montreal_1996_7-4-126-19-4-11.webp
Screenshot_ask_baleno99_montreal_1996_7-4-126-19-3-45.webp
 
New CSP Version lights-patch-v0.3.0-preview440-full

    • CSP physics:
      • Maxwell hysteresis for tires;
      • Some ABS code updates;
      • Revised engine delays (now functional);
      • Fixed bug with engine air density sensitivity;
      • Asymmetrical setup options for cosmic;
      • Aero/ride height lookups fixed;
      • CSP logger updates.
    • “Revenant” mode (pretty much rewritten from scratch by @Neoned):
      • Alt-tab drift compensator: replaced per-tick threshold with a running-balance accumulator; persists across recording, idle, and playback phases;
      • Mid-playback alt-tab no longer truncates the ghost;
      • Ghost resumes at the exact paused frame after exiting AC's built-in replay (was teleporting to recording start);
      • Fixed “Recording lost due to rewind” after replay-exit cycle;
      • Added replay-exit grace window for car teleports and a post-replay settle window for the compensator to filter AC’s transient session-clock snaps;
      • KO threshold in breakable mode now uses horizontal magnitude of relative velocity — kerb-bounce vertical spikes can no longer false-trigger KOs;
      • Removed directional bias on angled contacts, clipping the rear corner now KOs at the same closing speed as a head-on hit.
    • Upscalers:
      • DLSS updated to 310.6.0, better support for user-provided DLLs;
      • OptiScaler updated to 0.9.2, should work better with CSP approach;
      • DLSS, XeSS and SGSR2: option to use FFX CAS for sharpening instead of NIS;
      • New driver tags are compatible with DLSS and other advanced upscalers.
    • Audio:
      • Bodywork audio logic rewritten, takes wheels load into account, works in replays (can be switched off in “dev.ini”);
      • Skids and surface audio slowly fades in after the loading, to prevent audio glitches;
      • Collision audio mixup fixed;
      • Issue with skid audio playing for a frame when rain starts with default Weather FX style fixed.
    • New AI Behavior:
      • A small issue with how AIs are using turbo in qualify sessions on some tracks fixed;
      • Tweak for custom lateral grip estimation, enabled by default, with an option to account for brake-related weight distribution shift;
      • Tweak for AI grip multiplier smoothing things out and cutting multiplier off if it seems like the car is at a risk of tipping over;
      • Tweak disabling stability assist unless car is sliding;
      • “Adjust shifting for slow sectors” tweak applies in pitlane at all times;
      • AI Flood: fix for car trajectories after teleporting;
      • Custom AI: a named pipe allowing to evaluate lateral grip live.
    • Controls:
      • New tweak “Monitor connected devices” allowing AC to detect controllers connected live;
      • That old bug where sometimes some random buttons would change camera is finally fixed;
      • A bug with Gamepad FX and mouse steering scripts fixed (recent regression);
      • Extra input axis __EXT_CLUTCH_ALT fixed, new __EXT_LOOK_AXIS for looking around (CM support is coming soon);
      • New LUT_LINEAR flag for axes in “controls.ini” switching LUTs to linear interpolation mode (good for setting up deadzones);
      • Mobile script of Gamepad FX fixed.
    • Experiments:
      • New non-physics experiment: adaptive smoothing for remote cars, alters remote factor live to adapt to packets rate;
      • New “Direct media access” non-physics experiment accessing currenly playing audio from CSP directly, faster and with more details;
      • New “Custom FFB initialization” non-physics experiment (disabled by default);
      • “Clamp car mesh colliders” experiment is enabled by default;
      • “Repair wheel joints” has been updated and is moved back to experiments, disabled by default to be tested properly.
    • New main menu:
      • Option to load last setup automatically;
      • Change spawn set in an offline practice mode;
      • A bit of extra details about selected car;
      • Support for setup items sharing the same place with only one visible and others hidden.
    • Compatibility with Suspension Test Track:
      • Cars are floating in the air on teleporting to pits and no longer keep teleporting in main menu;
      • Tyres FX no longer malfunctions.
    • Showroom mode:
      • Run showroom on regular tracks by adding [__SHOWROOM_MODE] ACTIVE=1 to “race.ini” (some support for CM is coming soon);
      • Press Page Up/Page Down in CSP showroom to switch car skins, Alt+~ to switch the car;
      • Driver tags no longer show up in the showroom mode.
    • CSP Debug:
      • Sliders to adjust temperature (.debugAware() from shared/sim/weather has been updated as well);
      • App no longer unloads automatically when closed;
      • Wind speed slider got a label.
    • Miscellaneous:
      • With sun shadows disabled, CSP will use VAO for fallback shadows;
      • Sparks updated, brighter and with tweaked motion, few sparks from overheating brakes;
      • DWrite fonts rendering (used by UI API and original AC) is optimized a bit more;
      • “Accelerate mesh-ray checks” option updated, optimized and enabled by default if there is enough memory;
      • Tasks switcher (Ctrl+Tab): windows previews updated to be a bit more efficient, better handle windows changing sizes;
      • CSP better communicates if a window user tries to open is being redirected away;
      • “Redirect media players audio through FMOD” is fixed and back, still disabled by default for now.
    • Rendering fixes:
      • Small improvements to trees billboards, shading of trees without LCS fixed;
      • TAA is adjusted to be a bit less flickery, especially around flags;
      • Grass FX: COLOR_SHIFT_… no longer messes up grass color nearby;
      • Volumetric fog (and other effects using render.fullscreenPass() with low depth) work better with super-low FOV views;
      • Brake Disc FX: glow is applied to a mesh in LOD B, if any, as well;
      • Cables AA improved, better supporting different meshes, cables are slogging a bit based on ambient temperature;
      • Ash particles shading adjusted;
      • Space look: full eclipse projection is fixed;
      • When drawing stars, CSP takes atmospheric refraction into account;
      • Fake car shadows are better positioned for cars with only three wheels, with one wheel in the front;
      • Simplified YEBIS step (used for virtual mirrors with some upscalers, for example) is improved, now syncing with autoexposure and supporting all built-in tonemap functions;
      • Fake cars shadows: frustum culling adjusted.
    • Other fixes:
      • “Awake physics in pits” no longer applies outside of pits (previously, it was active as long as setup menu was opened);
      • Non-finite ride height estimation in pits with cosmic suspension fixed;
      • Original chase camera no longer jumps around when car flips;
      • Saving and loading of opened apps updated, should be more reliable;
      • Saving changes in PP Filters Editor multiple times per session fixed;
      • A bunch of fixes for drivers heads movement;
      • Removal of old autosaved replays rewritten to prevent removing unnecessary files, remove files based on creation date;
      • Small fixes for graphs of Render Stats app;
      • CSP is once again compatible with cars with “'” and alike in their folder names (regression happened somewhere in late 0.2 or 0.3);
      • Zeroing shared memory files should be more reliable;
      • A rare replay-related crash should be fixed;
      • Car ground plane computation improved to better handle uneven surfaces;
      • Cars data caching improved;
      • [DEV] EXTRACT_RESOURCES option fixed, previously would only work on CSP version change (or with “cfg/extension/state/version.ini” removed);
      • AC logo and help apps are always hidden, even if they’re visible in “acos.ini”;
      • When checking if AC window is covered, CSP takes into account if it’s partially outside of working space;
      • CSP warns about badly saved DDS textures with “[TextureLoader]” prefix in logs;
      • New DDS loader now supports incorrect block-compressed textures (BC6/BC7 with sizes not divisible by 4), adds some padding (only way for it to work).
    [*]

    Configs​


    • Cars:
      • New [BASIC] REMOVE_STATIC_STEER_ANIMATION_SETS=1 stopping AC from shifting static nodes with “steer.ksanim” (fix for some older mods);
      • New [FRONT/REAR] IGNITION_TEMPERATURE=… parameter for car configs for tuning visual tyre flames effect (default temperature is 350 °C), particles adjusted;
      • New LDR_OUTPUT=1 for [RENDERING_CAMERA_…] for drawing the scene in LDR color space, allowing to bind results to a texture or drawing via Lua directly;
      • GENERATE_MIPS of [TEXTURE_PREPROCESSING_…] should be working now;
      • CSP no longer wastes time updating unused [TEXTURE_PREPROCESSING_…] (turns out, that’s a thing with some mods);
      • [MESH_SPLIT_…]: new LOOK_AT_NORMALS mode (the same parameters as LOOK_AT);
      • Nodes from [REFLECTIONS_FX] INTERIOR_NODES are included into interior masking;
      • Default value for lights’ DISTANT_GLARE is 0 for open wheelers, should solve some problems with some mods;
      • Guessing for default brake disks type adjusted to include more ceramic brakes;
      • Crashes when editing car configs with dynamic textures fixed.
    • Tracks:
      • New [SURFACE_WAV_OVERRIDE_…] KEY=… WAV=… allowing to override track surface audio with a CSP track config;
      • [GRASS_FX_ADJUSTMENT_…] failing to load TEXTURE fixed, new ASYNC=1 option for loading texture only when needed;
      • New DYNAMIC_CABLES_WIND_MULT to set wind intensity on cables.
    [*]

    Lua​


    • Common API:
      • ac.loadSoundbank() can load “GUIDs.txt” from a string;
      • New ac.getCarExtraSwitchState();
      • New ac.getCarPhysics().wheels[].driveTorque field storing torque post-drivetrain;
      • New require('shared/sim/cars').getTyreType() to get the type of a tyres set;
      • New function require('shared/utils/oswindow').monitors() returning list of available monitors;
      • Some setup-related functions, such as ac.getSetupSpinners() are available to all types of scripts now;
      • Issues with web. API failing to handle redirects fixed (recent regression);
      • ac.CarAudioTweak.setVolume()/.setPitch()/.setDistanceMin()/.setDistanceMax()/.setTransform() now blocks values set via car config;
      • ac.storage now can handle binary data (strings with zeroes) as well;
      • shared/utils/playing: new functions to control playback in detail, such as .seek() or .setShuffle() (require that new experiment with direct media control);
      • ac.mediaPlayPause() and other two use direct media control if available (also with that new option);
      • New .surfaceOriginIndex field in wheels of ac.getCar(), require('shared/sim/surfaces').raycastDetailed() got a surface.originFilename field (I realized section name of a surface definition is not unique).
    • UI:
      • New ui.html() function for rendering some basic HTML (doesn’t support most of the features, uses optimized version of litehtml library);
      • New ui.markdown() function for rendering Markdown text;
      • Calling ui.addSettings() from car scripts of secondary car won’t have an effect anymore;
      • UI API, DWrite fonts: measuring no longer ignores trailing spaces;
      • Layout with ui.setNextItemIcon(ui.Icons.File) used in front of items without a label fixed;
      • New flags parameter for ui.addSettings();
      • Methods :memoryFootprint() for extra canvas and geometry shot;
      • Library shared/ui/virtualizing: scroll snapping no longer overrides mouse wheel.
    • Scene API:
      • New ac.SceneReference:assignMaterialFrom() method for copying existing materials;
      • New ac.GeometryShot:overrideReflectionCubemap() method for recreating the style of car previews in the main menu;
      • ac.SceneReference:raycast(): UV and normal compute for non-default culling fixed;
      • :loadKN5() (with other three) and physics.RigidBody can load binary KN5 data instead of KN5 filename;
      • Generally, things should be a bit more stable if scripts are creating and deleting geometry;
      • :resetSkin() called for scene references of parent nodes rather than individual meshes fixed;
      • Conflict between emissives and applying live shader replacements fixed;
      • New render.AntialiasingMode.SimplifiedYEBIS using the same pass as virtual mirror.
    • I/O:
      • New os.hostNamedPipe() for creating a named pipe as an alternative method of IPC;
      • New os.openSerialPort() and os.listSerialPortsAsync() to talk to Arduinos and other COM-connected devices.
    • Gameplay API:
      • Freer Camera settings can be adjusted live with ac.applyLiveConfigEdit();
      • Behavior of ac.grabCamera() improved, now it can be used to get a camera to follow a car;
      • :setRedirectLayer(): arguments for clipping the region or using MIPs.
    • Physics API:
      • physics.raycastTrack(), physics.forceUser… and overriding steering functions are available to background and physics workers, new parameters, updated docs;
      • physics.addTrackSurface(): rendering of debug outline fixed;
      • Physics workers spawned by online scripts can use physics API.
    • Car physics scripts:
      • New ac.loadRenderThreadModule() for car physics scripts allowing to load a render car script from car data (unlike other scripts, it can create new setup tabs and set setup items);
      • New .pressureDynamic, .pressureStatic, .surfaceGrip, .surfacePitlane and .surfaceValidTrack fields for wheels of ac.accessCarPhysics();
      • New values to override live:
        • ac.CarPhysicsValueID.BrakeTorque;
        • ac.CarPhysicsValueID.HandbrakeTorque;
        • ac.CarPhysicsValueID.BrakeFrontBias;
        • ac.CarPhysicsValueID.SteerRatio;
        • ac.CarPhysicsValueID.LinearSteerRodRatio;
        • ac.CarPhysicsValueID.EngineLimiterCycles;
        • ac.CarPhysicsValueID.BlockOriginalTC;
        • ac.CarPhysicsValueID.TyresVirtualKm;
        • ac.CarPhysicsValueID.TyresDirtLevel;
        • ac.CarPhysicsValueID.TyresSlipRatio;
      • ac.CarPhysicsValueID.TCThrottleOverride fixed, now actually enables TC if 1;
      • New ac.computeEngineStep() computing engine torque for given inputs;
      • CUSTOM_SCRIPT_ITEM: use DEFAULT = ini_file_name.ini/SECTION/VALUE[/DEFAULT] to refer to a value from a different INI file instead of hardcoding a default value, or DEFAULT = SETUP_INI_SECTION[/DEFAULT] to borrow a default value from a different section of “setup.ini”;
      • ac.accessCarPhysics().brake reporting 0 in pits fixed;
      • New gasForAudio key for ac.overrideCarState();
      • New functions ac.configureSetupItems() and ac.configureSetupTabs() for car physics and data render scripts.
    • Scriptable post-processing filters:
      • Custom pixel density works with upscaling disabled;
      • New ac.getSubpixelOffset() returning subpixel offset from TAA or advanced upscalers;
      • New dynamic::efx::normals, dynamic::efx::motion and dynamic::efx::stencil.
    • Weather FX:
      • New ac.doYEBISPostProcessing() for running YEBIS in ac.onPostProcessing(), allowing to do extra postprocessing at LDR stage (for now, without VR support);
      • Third argument for ac.setHDRToLDRConversionHints() guiding simplified post-processing step (used for virtual mirrors, for example).
    • Miscellaneous:
      • New ac.getDesiredLookDirection() for chase camera scripts;
      • ac.loadCarState() should be available to online scripts;
      • Regular car scripts are loading in background to prevent freezes;
      • A flag DISALLOW_AI_FLOOD for New Modes;
      • New [CORE] PRELOAD_SQLITE=1 flag for Lua apps for preloading SQLite module early;
      • Lua Debug app: button to copy last error, better support for binary data;
      • shared/sim/altonline: a couple of fixes for documentation.
    [*]
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back