Assetto Corsa PC Mods General DiscussionPC

[Vintagedriver]

such a shame they are on RD, when there is facilities here to upload to without the hypocrisy and slow downloads of RD

Normally that is indeed the case when trying to download multiple files simultaneously from RD.
I did download (=Saturday 1-6-2023 14:00h) all the 50/60’s updates from @Rainmaker87 on RD, as I was mostly one revision behind, with no slow download. There was only one exception and that was @Rainmaker87 Berngarten update.
BTW, I’m using 1Gbs glasswire.

Request for @Rainmaker87 to make his file prepared for the CM download functionality and use the auto update by CM. That modder is so active I fall behind.

Edit: its now slow as a snail, downloading Solitude from Rainmaker Sunday 18:00h

 

[Pfalzdriver]

If you drive it today you use modern possibilities to navigate

TBH I've also added a PPC which was available since 2003 to have a navigator on board. But I decided to remove it again.

But I'll replace the cigs as soon as the last tuning part fits as I like it, the almighty "Lufthutze".

 

[Breanuts]

I'm experiencing this weird driver bug with the RSS Mercer V8 GT-M especially when it rains when moving from first-person to orbit camera. Is anyone else experiencing the same thing?

 

[gracied]

I have a detail to criticize

The blue "Auto-Atlas" is right and looks right out of the 80s 90s, but the cigarettes contains the warning shield, which came in the 2010s

Take this post not serious, it`s all but not important at all. I just noticed it outright

I'm wondering where the fake Burberry baseball cap and Lonsdale Hoodie is......... the cigs should L&B, stick a Max Power mag in there and all the Art College girls from Greece will be 👿👿

 

[samdale12]

View attachment 1269951

I'm experiencing this weird driver bug with the RSS Mercer V8 GT-M especially when it rains when moving from first-person to orbit camera. Is anyone else experiencing the same thing?

Deactivate the ‘New human skin shader’ in CSP settings. Graphics adjustments tab.

 

[DaWallace]

Thanks , There is a difference between CSP needs and car encrypt, if it was not I could have repaired it so that it works without !! what a mess !

You're really still using AC vanilla? Why? Can't believe that... i would say that the most, or almost all Mods are now requires CSP. So why still using vanilla and not CSP with all the great features?🤔

 

[Baler]

Just a first trial getting the wiper to work.
It´s only my second car I tried this, so for sure not perfect, but a first starting point. Put this in the end of your config:

[MESH_ADJUSTMENT_...]
ACTIVE = 1
MESHES = Object-26, Object-27
IS_TRANSPARENT = 1

-----------------------------------------------------------------------------------------------------------------------------------------
; wipers

; wobbly wipers
[WIPERS]
WIND_THRESHOLDS_KMH = 120, 250 ; speed for wipers to start vibrating and for maximum vibration
WIND_AMPLITUDE_MULT = 1.75 ; multiplier for amplitude
WIND_FREQUENCY_MULT = 1.75 ; multiplier for frequency
WIND_OFFSET = 0.01 ; base animation

[ANIMATED_WIPER_...]
ANIMATION_OFFSET = 0.25
DEBUG = 0
MESHES = EXT_Wiper
UNDERLYING_SURFACE = Object-26
GROUP_0 = 'EXT_Wiper@A=*'
GROUP_0_ANGLE_FROM = -52
GROUP_0_ANGLE_TO = 52
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = 0.002215337, 0.8379682, 0.9851018
GROUP_0_PIVOT = -0.01867288, 0.5777404, 1.364407

[MESH_ADJUSTMENT_...]
MESHES = EXT_Wiper
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

And people with CSP and Rain FX will get this:
View attachment 1267891

Hi slider666,

Could you please guide me to the specific config file/location where this code needs to be pasted.

Many Thanks,

Graham

Just a first trial getting the wiper to work.
It´s only my second car I tried this, so for sure not perfect, but a first starting point. Put this in the end of your config:

[MESH_ADJUSTMENT_...]
ACTIVE = 1
MESHES = Object-26, Object-27
IS_TRANSPARENT = 1

-----------------------------------------------------------------------------------------------------------------------------------------
; wipers

; wobbly wipers
[WIPERS]
WIND_THRESHOLDS_KMH = 120, 250 ; speed for wipers to start vibrating and for maximum vibration
WIND_AMPLITUDE_MULT = 1.75 ; multiplier for amplitude
WIND_FREQUENCY_MULT = 1.75 ; multiplier for frequency
WIND_OFFSET = 0.01 ; base animation

[ANIMATED_WIPER_...]
ANIMATION_OFFSET = 0.25
DEBUG = 0
MESHES = EXT_Wiper
UNDERLYING_SURFACE = Object-26
GROUP_0 = 'EXT_Wiper@A=*'
GROUP_0_ANGLE_FROM = -52
GROUP_0_ANGLE_TO = 52
GROUP_0_AXIS = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = 0.002215337, 0.8379682, 0.9851018
GROUP_0_PIVOT = -0.01867288, 0.5777404, 1.364407

[MESH_ADJUSTMENT_...]
MESHES = EXT_Wiper
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

And people with CSP and Rain FX will get this:
View attachment 1267891

Hi there,

slider666​

Could you possibly explain where the config file is (location) so that I can paste in your code correctly?

Many thanks,

Graham

 

[slider666]

Hi slider666,

Could you please guide me to the specific config file/location where this code needs to be pasted.

Many Thanks,

Graham

Hi there,

slider666​

Could you possibly explain where the config file is (location) so that I can paste in your code correctly?

Many thanks,

Graham

You can see it here, @Shokeus shows where you can put the code in:

Assetto Corsa PC Mods General Discussion

Prato and Crema tracks (and others) that we have on AC came from netKar Pro too. They never cared about Trento-Bondone because in the beginning they never expected such results for AC, then, when AC gets his glory even more they forgot about it. As Hillclimb fan i would have loved to see a...

www.gtplanet.net

Have a look in your car folder, there should be an extension folder and in there should be the ext_config.ini. Put the code in the end of that ini and save it. That´s it. Have fun.

 

[Rainmaker87]

Bad news for Vintagedriver: more updates! But keep in mind there was not a single update on RD that was not posted here earlier. So actually yesterday you should download the Remlingrade update only if you have had all the previous versions.

UPDATE for old tracks today:

Solitude 1964 v2.01

Solitude 1964 v2.3 by NeelJ and Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

v2.01
-fixed a GrassFX bug

v2.0
-CSP support: GrassFX, RainFX (by el_locho), water shader
-shader overhaul
-added lights from the sliderman/leBluem version + updated textures
-added vao patch (CM version)
-merged the .kn5 files parts together
-added loading screens
-new UI
-added track description by Fanapryde
-added option for bumpy and smooth road meshes in extras folder, standard is smooth
-put back the Lotus 49 that is on the truck
-fixed some logos being stretched
-added option to removed 2d crowds: open the ext_config.ini in the extension folder scroll down to last ";remove 2d crowds" and set ACTIVE = 1
-fixed hairlines over some crowds
-purged track files for smaller file size
-28 pit boxes now

Anderstorp 2007 v2.0

Anderstorp 2007 v2.3 by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

v2.0
-CSP support: RainFX, GrassFX
-shader overhaul
-added a side grass texture
-removed some original grass
-new smoothed road mesh
-new UI
-added a Read Me file
-added loading screens
-28 pit boxes now

 

[GT3Masters97]

View attachment 1269951

I'm experiencing this weird driver bug with the RSS Mercer V8 GT-M especially when it rains when moving from first-person to orbit camera. Is anyone else experiencing the same thing?

I think you can fix it temporarily by putting these lines in an ext_config.ini file inside the skin folder:

[DRIVER3D_MODEL]
NAME= "name of the driver model you want to use without quotes"
POSITION=0.0,0.0,0.0

 

[JK1977]

Released : GT by Citroen Race Car´08 V. 1.0
Converted from GT6 By F302
-Working Wipers (animeted)
-Interior Light
-interior AO (carbon parts only)
-sound (Kunos McLaren MP4-12C GT3)
-interior new mapping (carbon parts and alcantara)
-add digital display (incl. Headup)
-extension Folder(wipers)
-add lods
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
please give your opinion on the car
what is good and what is less good!
tested on CSP 0.1.80-preview115
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager.
Download:

f302_gt_by citroen

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[giorgos_nes]

I have that skin, but it only changes the kerbs textures and other things that are not related to the tarmac itself. Thanks anyway.

What I would like to do is to remove or hide that ridiculous texture and record the real skidmarks on the fly while using this track through the "skidmarksFX" option in CM, I think it is much more realistic and authentic than this fake texture.

My bad sorry... just found the one I use. The second link with the updated skid marks. I believe it should do the trick.

Assetto Corsa PC Mods General Discussion

I skip almost every post that doesn't have a download link. Me not. You guys laugh but I really wanted to follow the conversation first, but failed on my english skills.😀

www.gtplanet.net

 

[Alis_70]

View attachment 1270002Released : GT by Citroen Race Car´08 V. 1.0
Converted from GT6 By F302
-Working Wipers (animeted)
-Interior Light
-interior AO (carbon parts only)
-sound (Kunos McLaren MP4-12C GT3)
-interior new mapping (carbon parts and alcantara)
-add digital display (incl. Headup)
-extension Folder(wipers)
-add lods
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
please give your opinion on the car
what is good and what is less good!
tested on CSP 0.1.80-preview115
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager.
Download:

f302_gt_by citroen

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Do you already know your next projects ?

 

[ApexVGear]

such a shame they are on RD, when there is facilities here to upload to without the hypocrisy and slow downloads of RD

I think Racedepartment may have improved or corrected their slow server issues. Yesterday, I downloaded all of Rainmaker's tracks within 15-20 minutes, all downloading at the same time, and this was on a Saturday, and sort of a "holiday" weekend in the US (Independence day is Tuesday). For me, it's been a few years since I was able to download at this faster rate. I also noticed this morning that there are some design changes to the site, notably that the AC mod categories are colored buttons rather than text links. It threw me for a moment, but I think it's an improvement. Maybe you could set up an automatic CM update.

So much work went into this, and yet they left a massive and obvious bug in this mod:
you can see the track in an unrealistic way due to a gap (hole) just under the hood.
(seen from first person cockpit view in VR - don't know if it is visible in flatscreen mode)
This is so immersion breaking that it goes from 5 to 2 stars for me.

Someone here knows how to do a quickfix for that?

TECHART GTstreet R see-through hood gap issue

In VR, I adjusted my view with the in-game/sim app so my "head" is at the correct position over the driver's shoulders. I did this immediately when I first loaded the car (as I always do with a new car mod), so I never noticed the issue. If I lean forward and up some, I can see it, but it's extremely minimal for me. However, @DaWallace (assuming you or your group can do something about it), it's something that should be fixed and updated, as everything else about this mod is very good. I've really enjoyed it since download and installation yesterday morning.

UPDATE>> @jac0 and @slider666 figured out a fix for now. Copy and paste into the Ext_config.ini file.

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= polySurface38830
CULL_MODE= OFF

View when head in correct position in VR

View if I lean forward, up to the dash--look just above the center of the wiper

 

[jac0]

<snip>


TECHART GTstreet R see-through hood gap issue

In VR, I adjusted my view with the in-game/sim app so my "head" is at the correct position over the driver's shoulders. I did this immediately when I first loaded the car (as I always do with a new car mod), so I never noticed the issue. If I lean forward and up some, I can see it, but it's extremely minimal for me. However, @DaWallace (assuming you or your group can do something about it), it's something that should be fixed and updated, as everything else about this mod is very good. I've really enjoyed it since download and installation yesterday morning.

View when head in correct position in VR
View attachment 1270004

View if I lean forward, up to the dash--look just above the center of the wiper
View attachment 1270005

I don't see the gap that I see in either of your pictures... and for some unknown reason my screen is black when driving VR, so I can't take screenshots...
Anyway , it's there for me and will be something the author needs to fix as I don't suppose it's something we can fix, like for instance setting some texture to none-transparant, which was by mistake set to transparant.

ps: I adjust my view in VR not according to the neck of the driver, but so that the hands of the driver match my hands in real life... try it, it adds much to the immersion!

 

[slider666]

I don't see the gap that I see in either of your pictures... and for some unknown reason my screen is black when driving VR, so I can't take screenshots...
Anyway , it's there for me and will be something the author needs to fix as I don't suppose it's something we can fix, like for instance setting some texture to none-transparant, which was by mistake set to transparant.

ps: I adjust my view in VR not according to the neck of the driver, but so that the hands of the driver match my hands in real life... try it, it adds much to the immersion!

You could try this, though I can´t use VR and verify it. 🤷‍♂️

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= ext_b?, ext_p?, ext_c?, front_w?, polySurface?,
CULL_MODE= OFF

Or wait for a better fix by the authors...

 

[slider666]

Hello everyone, I wanted to know if there is any way of smooth out this or tweak something to get a better blending with the tarmac itself? or even hide this texture? (Le Mans FM7 /sx_Lemans 2.5)

View attachment 1269525

View attachment 1269524

View attachment 1269523

If you really want to remove it, you could try this:

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS = groove
IS_RENDERABLE= 0

At it to the end of existing ext_config.ini

 

[jac0]

View attachment 1270002Released : GT by Citroen Race Car´08 V. 1.0
Converted from GT6 By F302
-Working Wipers (animeted)
-Interior Light
-interior AO (carbon parts only)
-sound (Kunos McLaren MP4-12C GT3)
-interior new mapping (carbon parts and alcantara)
-add digital display (incl. Headup)
-extension Folder(wipers)
-add lods
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
please give your opinion on the car
what is good and what is less good!
tested on CSP 0.1.80-preview115
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager.
Download:

f302_gt_by citroen

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Blue and orange had the measles ! Here a quick fix

Now onto testing/driving this beauty...

 

[jac0]

You could try this, though I can´t use VR and verify it. 🤷‍♂️

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= ext_b?, ext_p?, ext_c?, front_w?, polySurface?,
CULL_MODE= OFF

Or wait for a better fix by the authors...

Now the gap is gone , but also my side windows are no longer see-through
but I guess it's just a matter of me putting only the correct mesh , thanks!!!!

EDIT : this seems to do the trick :
[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= polySurface38830
CULL_MODE= OFF

 

[seamount0]

Hi I have a problem with the original kunos Monza66; as you can see below, there are strange pictures in the sky ... what is the problem here ? I tried to re-dowload the track from steam, but the problem is still there ... so it's 100% the original vanilla Monza66, and that is the only track which gives me problems
any help would be very appreciated

 

[slider666]

Now the gap is gone , but also my side windows are no longer see-through
but I guess it's just a matter of me putting only the correct mesh , thanks!!!!

EDIT : this seems to do the trick :
[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= polySurface38830
CULL_MODE= OFF

Sorry, my fault. Test this then:

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= ext_b?, ext_p?, ext_c?, front_w?, polySurface?,
CULL_MODE= OFF

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= INT_WINDOWS, windows_ext,
CULL_MODE= FRONT

Sorry, seems you got it meanwhile fixed differently.... 👍

 

[Diegonapoli10]

well that was unexpected .. RSS 1986 Released !

 

[jac0]

Sorry, my fault. Test this then:

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MESHES= ext_b?, ext_p?, ext_c?, front_w?, polySurface?,
CULL_MODE= OFF

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= INT_WINDOWS, windows_ext,
CULL_MODE= FRONT

Sorry, seems you got it meanwhile fixed differently.... 👍

your suggestion worked equaly well, thanks again!

 

[multilaf]

Hi I have a problem with the original kunos Monza66; as you can see below, there are strange pictures in the sky ... what is the problem here ? I tried to re-dowload the track from steam, but the problem is still there ... so it's 100% the original vanilla Monza66, and that is the only track which gives me problems
any help would be very appreciated

View attachment 1270017View attachment 1270018

I have the same issue for some tracks and found out that it comes from the last Pure version 0.190.
Uncheck shaders landscape from pure app

Good luck.

 

[Rainmaker87]

UPDATE, yes another one, SURFERS PARADIES 2004​

v3.0
-added retexture by Mike08
-added night lights by leBluem and Mike08
-added track description by Fanapryde
-added AI hints by KevinK2
-added vao patch (CM version)
-CSP support: GrassFX, RainFX, water shader
-shader overhaul
-new road shader
-added loading screens
-new UI
-fixed cut detect won't work on first chicane
-added a pic to the tv screens
-purged track files for less size

Surfers Paradise 2004 v3.1 by NeelJ and Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[JK1977]

Blue and orange had the measles ! Here a quick fix

View attachment 1270012View attachment 1270014

View attachment 1270015View attachment 1270016

Now onto testing/driving this beauty...

thx

 

[nanenab]

Wow, finally a mod that is not gt3. Great.

 

[Italotracks]

Hi everyone,

Sorry it's been ages since I last posted an update! I have been very busy IRL, working 60+ hours a week in my day job, and then finding time to work on Pescara 57 as well. I haven't posted recently because the work I've been doing has been 'under the hood' but rest assured that it's progressing nicely and I'm aiming to have it done around October.
That might seem rather fanciful, but the good news (and bad news for my wallet) is that I am now out of work!
I will be treating my track endeavours as a full time job from now on, so hopefully Pescara will come soon to be followed by San Remo and Livorno. Speaking of which, having left my Pescara project on my HDD at home I have spent the week (visiting my parents) laying thousands of spline vertices over the photogrammetry data for all layouts of Livorno including the infamous Montenero circuit.
It's just a matter of converting those to polygons and I'll be driving the course in very rudimentary form.
I can tell already that some of the corners are absolutely fabulous.

Within the next month I aim to have Pescara's trees all planted, fields/terrain finalized, and distant buildings in place for a WIP video.

Regards

 

[seamount0]

I have the same issue for some tracks and found out that it comes from the last Pure version 0.190.
Uncheck shaders landscape from pure app
View attachment 1270036


Good luck.

thank you for your answer; but I do not have Pure neither Sol. I just have CSP 1.73

 

[ApexVGear]

View attachment 1270002Released : GT by Citroen Race Car´08 V. 1.0
Converted from GT6 By F302
-Working Wipers (animeted)
-Interior Light
-interior AO (carbon parts only)
-sound (Kunos McLaren MP4-12C GT3)
-interior new mapping (carbon parts and alcantara)
-add digital display (incl. Headup)
-extension Folder(wipers)
-add lods
hope u enjoy the Car
ps : send feedback ,bugs ,missing things
please give your opinion on the car
what is good and what is less good!
tested on CSP 0.1.80-preview115
To install, move folders to "...\SteamApps\common\assettocorsa" or simply
drag'n'drop archive to Content Manager.
Download:

f302_gt_by citroen

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Very nice work, and fun to drive!

1. I'm having trouble keeping temperature in the front tires. Even on a technical track, they go cold very quickly, and the car understeers more.

2. Something interesting, but maybe of no concern, compared to the RTM-Shop mod (top in the image), yours is smaller. Maybe your version is right and theirs is wrong. I don't know what reference could be used to check which is correct it if anyone wanted to.