Assetto Corsa PC Mods General DiscussionPC

[Valyul]

For those interested (to improve racing performance) and who don't want a program that's tedious to use, I use "XnConvert". This program will modify most textures in the format or resolution of your choice.

I'm not an expert on texture skins in car mod folders, and I'm sure there are plenty of other programs to do this kind of texture work.

A simple drag and drop of textures from a skin, anything from (for example) 2016_Gloves_DIFF, 2016_Suit_DIFF, 2016_Suit_NM, ac_crew, and many others...

Once you've chosen the conversion parameters, just press "convert," and this program does the job well.

P.S.: I'm not promoting them, just what I use regularly and find very useful.

A fairly simple program that requires little knowledge to use.

Ps. 2: This message is for people who aren't familiar with this type of program (I know that most people here are much more experienced in modding than I am and use other methods).

Hey, thank you for the tip. You can convert an entire skin folder at once, saving hundreds of MB. Do you know what could be lost doing that?

 

[24H]

working on a new set of preview settings in cooperation with @Fall Guy
sorry for the bad quality, but the forum upload reduces the quality a lot

 

[andrevr]

working on a new set of preview settings in cooperation with @Fall Guy
sorry for the bad quality, but the forum upload reduces the quality a lot


View attachment 1442089

View attachment 1442095

View attachment 1442092

View attachment 1442093

View attachment 1442096

View attachment 1442097

These look fantastic 👏

 

[Aaron Green]

I can't get past the setup menu. Any ideas? Thanks

Are you using tyre/tire warmers?

 

[F A R S I V E]

Teaser for this month

All Scratch Made From 3D Design To Physics

 

[Daniel Graf]

Hi guys,

I'm in the process of sorting out my AC. I started with the GT3 vehicles from 2006-2010. There are no vehicles from Kunos for this period, but there are some mods. Many are of poor quality, some acceptable others really good. An example of really good vehicles are the GT3s from DaWallace. Unfortunately, however, the vehicles are always more on GT2 level and clearly too fast compared to the originals. Because I don't want to manage everything via the CM BoP, I started to modify the data. I started with the Mosler MT900R GT3.

These are the changes I made:
1. power.lut:
514 bhp peak power @ 5900 rpm
675 Nm peak torque @ 4800 rpm
Considering 15% drivetrain loss

2. engine.ini
Set LIMITER=7200 rpm instead of the original incorrect value (7920 rpm).
Changed COAST_REF RPM from 7400 to 7200 rpm.
Reduced TORQUE from 110 Nm to 100 Nm.

3. car.ini
Changed INERTIA=1.5, 0.85, 3.8 (was 1.8, 0.9, 4.176).
Reduced FFMULT=1.7 (was 2.0) to avoid FFB clipping and create smoother steering feel.
STEER_ASSIST=0.6 for comfortable and stable steering around center.
MAX_FUEL: Adjusted from 125 liters to 100 liters.
TOTALMASS=1435 (Belcar Spec: 1360 kg + Fahrer)

5. tyres.ini
Front tires: Corrected to WIDTH=0.300 m, RADIUS=0.325 m, RIM_RADIUS=0.165 m
Rear tires: Corrected to WIDTH=0.310 m, RADIUS=0.355 m, RIM_RADIUS=0.165 m.
Tire specs now exactly match: Front: Michelin 30/65-R18, Rear: Michelin 31/71-R18

I based the data on the information available on the net from Rollcentre and Supercars.net.

The result is a vehicle that has lost none of its brute force and driving pleasure, but which is much closer to the times that were actually achieved in Spa 2009, for example.

My thanks go to DaWallace for this fantastic vehicle. My modifications are only a suggestion to all those who would like to use the Mosler together with other GT3s.

 

[Jezza819]

To me the RSS Ferrari 296 feels very slidey. Doesn't have a lot of grip.

 

[Instevs36]

Hey, thank you for the tip. You can convert an entire skin folder at once, saving hundreds of MB. Do you know what could be lost doing that?

Normally, nothing is lost if the correct options in the settings are chosen before converting the textures.A basic example: if you convert without changing the options, it doesn't replace the textures; it adds __result to the texture name. For example: 2016_Gloves_DIFF__result. You had to remove the __result to get the correct name.I did this at first, and once I understood the program, I changed the options to directly replace it with the same name as the mod's original texture.For example, replace: 2016_Gloves_DIFF with 2016_Gloves_DIFF like the original.And yes, thanks to this little program, it saves a lot of time when converting all the textures in the same folder.Note: If you're afraid of making a mistake, make a copy of the car's skins folder before using this type of program.Personally, I can't do without it anymore; I use it for all games that require texture modification.

 

[petercrill]

Mercedes CLK63 AMG Black Series 2008 Public Release!!
Download:https://www.mediafire.com/file/w8v6w265rl896my/clk_63_black_series_08_101creative.rar/file
Converted From TDU2
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

 

[Paintbox]

I have made quick thrown together extension edit for the legion 2 stroke v12 powered Lotus 23. This is for a 2 stroke smoke effect for some immersion. Might need still need a little tweaking but I think looks close to videos of the real car. Pick up the car from Legion and then get the excellent new skin from Danelcoppo on Overtake.

Legion ROTOVIC 1.5litre 2Stroke V12

Lotus Type 23s --------------------------20240418

ver:20240410 Fixed Tyre texture mapping. ver:20240417 Delete old version first, i.e. folder name 'Lotus_23' ver:20240417 Glass, VAO, collide...

perendinator.blogspot.com

Danelcoppo's Skin

Lotus 23B Rotorvic - chassis 23-R-1 - #126 (4K skin)

Hi :confused: Here's a contemporary livery for Legion's Lotus 23B Rotorvic. (perendinator > /2024/04/lotus-type-23-23c-versions-20240410.html) I couldn't find a good photo of a historical livery, so if anyone finds one, please send it my way. Sengue.

www.overtake.gg

Download my attached file (paste into car extension folder, replace orginal) then enjoy some 2 stroke smoke!

Edit - Since posting this I have noticed the original mod exhausts flames are defaulting too high compaired to photos of the engine of the real car, will look at editing the data flames file to match my smoke placement later this week.

 

[SoulMaTriX]

working on a new set of preview settings in cooperation with @Fall Guy
sorry for the bad quality, but the forum upload reduces the quality a lot


View attachment 1442089

View attachment 1442095

View attachment 1442092

View attachment 1442093

View attachment 1442096

View attachment 1442097

Awesome!

 

[MrLonguinha17]

Finishing the tests (free practice), for the BOAC - 1000km Brands Hatch 1970 (grid of 30 cars with what we have).

I tested 11 different cars individually (to check an approximate BoP), I think it was more or less good.

In the following 3 videos,

• Ferrari 512s Spyder
• Porsche 917k
• Matra Ms650

Had times close to each other as in the real race (although the qualifying times would have been a little lower), it all depends on the track conditions and opponents getting in the way.

Ferrari 512s Spyder

Porsche 917 K

Matra MS650 ( spec Brands Hatch '70 )

 

[Rivanov]

To me the RSS Ferrari 296 feels very slidey. Doesn't have a lot of grip.

I feel exactly the same! No feeling at all in the front tyres. I'm using Simucube 2 Pro with the "AC Kunos Default" profile within the Simucube Tuner.

 

[fleskebacon]

working on a new set of preview settings in cooperation with @Fall Guy
sorry for the bad quality, but the forum upload reduces the quality a lot

Nice! Are those for CSP previews?

 

[Ale2Passos]

Hi,

Not that I know all and I have no magic wand or something, but did you upgrade to latest CSP (might be cause?) and have you tried a different PPfilter? Other than this I don't really know to be honest (Am on Pure 2.57 myself too) not using CM though and have no problems.

Yes, I have updated to the latest version as well but there are no changes. It's weird because before updating it worked fine. I've tried a wide variety of PPfilters. None of them have worked.

unsure if the following helps... need to make an 'activation' choice. I chose the last option and all is OK.
View attachment 1442071

I did, but it didn't work, what strikes me the most is that that particular window flickers a lot when I open it, as if it wasn't working well. I've had this problem for days, it's driving me crazy.

 

[Ale2Passos]

Please watch the install video and install it exactly like it is shown there. You must use 7zip app and its Extract button!!!
Don't use any other methods to install Pure!!!

I've never had a problem doing it with winrar, but I guess it must be some issue that has been triggered when upgrading to Windows 11. I'll try it this afternoon, thank you.

PD: Sorry for the double post.

 

[giorgos_nes]

I feel exactly the same! No feeling at all in the front tyres. I'm using Simucube 2 Pro with the "AC Kunos Default" profile within the Simucube Tuner.

View attachment 1442233View attachment 1442234View attachment 1442235View attachment 1442232

Have you updated to the 1.1 version of the RSS 296? I think something about the FFB was mentioned in the changelog.

 

[Shokeus]

Hi everyone, I will try to ask a clear question :

can one make a light of the car dashbord like that of the gasoline but for the light "light", invisible in normal time but to turn on when light to turn on?

Thank

 

[24H]

Nice! Are those for CSP previews?

yep, it uses the CSP previews

 

[Den_88]

Hi everyone, I will try to ask a clear question :

can one make a light of the car dashbord like that of the gasoline but for the light "light", invisible in normal time but to turn on when light to turn on?

Thank

If I understand correctly, you want the light emitted by the dashboard to illuminate the immediate surroundings?

 

[Shokeus]

If I understand correctly, you want the light emitted by the dashboard to illuminate the immediate surroundings?

I wish it to be unseen when the lights are off and visible and bright when they are on .

Thanks

 

[Den_88]

I wish it to be unseen when the lights are off and visible and bright when they are on .

Thanks

Well...it's kind of obvious. When the light is off, it's not there)))))))

 

[Shokeus]

Well...it's kind of obvious. When the light is off, it's not there)))))))

it’s complicated to explain I know !

I try with a drawing ...

In Game :

what I have :
light off

light on

------------------------------------------------------------------------------------------------------------------------------------------------------


what I would like

light off

light on

 

[shi]

Marrakesh ePrix v1.02

Marrakesh ePrix | shin956

Get more from shin956 on Patreon

www.patreon.com

View attachment 1289157
The Marrakesh ePrix is held on the temporary Circuit International Automobile Moulay El Hassan. It is located in the Agdal district of Marrakech. The track is 2.971 km (1.846 mi) in length and features 14 turns. (Wikipedia)
Conversion from rFactor2.

-CSP recommended
-26 pit/start
-AI, cam

NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.

Credits & Thanks;
rFactor2 Original Track by Garitt Gibsn and Errol Prefet
-Thank you for giving me permission

AC Converted by @shi (shin956)
logo.png and sections.ini by @Fanapryde
AI lines and ai_hints.ini by mk-sg
Crowds texture by @Kniker97
marshall, cameraman and some textures by kunos
Test and Feedback by @Fanapryde

Enjoy.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;

-Fine-tuning textures by @twobegreen . (Thanks!)

v1.02 changelog;
New AI lines and ai_hints.ini by mk-sg. (Thanks)
Updated ext_config.ini. (trees, video screen and fence)
Updated trees mapping and normal.
Updated VAO-patch.

Marrakesh ePrix v1.02
The link is in the quote.

v1.02 changelog;
New AI lines and ai_hints.ini by mk-sg. (Thanks)
Updated ext_config.ini. (trees, video screen and fence)
Updated trees mapping and normal.
Updated VAO-patch.

 

[Den_88]

it’s complicated to explain I know !

I try with a drawing ...

View attachment 1442273
In Game :

what I have :
light off
View attachment 1442275
light on
View attachment 1442276


------------------------------------------------------------------------------------------------------------------------------------------------------


what I would like

light off
View attachment 1442277

light on
View attachment 1442278

study this topic

 

[Rivanov]

Have you updated to the 1.1 version of the RSS 296? I think something about the FFB was mentioned in the changelog.

Not yet! Will try it today!

 

[alexlockout]

skins lotus type 23 cosworth in low resolution and weight, for a real driver .
resolution - 2048x2048.
dds compression - bc3.
the weight of the entire folder (34 skins) was - 837 MB, became - 245 MB.
skins for standard models (without aerokit).
not a conversion, made from the source (psd), so the quality is quite decent.

Assetto Corsa PC Mods General Discussion

Maybe one day we'll have a good version of present-day Jerez for AC... God I'm so jealous of the RF2 guys. https://steamcommunity.com/sharedfiles/filedetails/?id=1229688469 It looks much, much better than alexmeyer's cartoonish version. Did you check the @Breathe track listings because there...

www.gtplanet.net

 

[Jezza819]

Not yet! Will try it today!

I was on ver. 1.1 when I posted. Doesn't feel any different than 1.0.

 

[LAFAYET47]

skins lotus type 23 cosworth in low resolution and weight, for a real driver .
resolution - 2048x2048.
dds compression - bc3.
the weight of the entire folder (34 skins) was - 837 MB, became - 245 MB.
skins for standard models (without aerokit).
not a conversion, made from the source (psd), so the quality is quite decent.

Assetto Corsa PC Mods General Discussion

Maybe one day we'll have a good version of present-day Jerez for AC... God I'm so jealous of the RF2 guys. https://steamcommunity.com/sharedfiles/filedetails/?id=1229688469 It looks much, much better than alexmeyer's cartoonish version. Did you check the @Breathe track listings because there...

www.gtplanet.net

Hello, thank you for your work. If I understood correctly, the compressed skins are for the Mk.X Cosworth model, right?

 

[alexlockout]

If I understood correctly, the compressed skins are for the Mk.X Cosworth model, right?

Hello, this fits all versions of Lotus Type 23, except Lotus Type 23B V8 Climax FWMV which has aero kit. Lightweight skins for it will be later.