Assetto Corsa PC Mods General DiscussionPC

[Masscot]

going step by step

for the rear lights, I added the following lines

[EMISSIVE_BRAKE_...]
NAME=TL_REFLECTOR
COLOR=63, 63, 63, 0.08
LAG=0.8
SIMULATE_HEATING=0.2
LOCATION=REAR
BIND_TO_HEADLIGHTS=0
CAST_LIGHT=1
CLUSTER_THRESHOLD=0.5

[EMISSIVE_LIGHT_...]
NAME=TL_REFLECTOR
COLOR=63, 63, 63, 0.09
LAG=0.8
SIMULATE_HEATING=0.2
LOCATION=REAR
BIND_TO_HEADLIGHTS=1
CAST_LIGHT=1
CLUSTER_THRESHOLD=0.5

View attachment 1484174

Thanks! From your images it seems like the number plate light comes on with EXTRA_A (DRLs)? Only front DRLs should come on with EXTRA_A, and no cockpit instruments should light up with DRLs in case those were missed too.
To avoid confusion/mistypes/misinterpretation, can you please upload the complete amended config?
Many thanks again.

 

[MasterFocus]

going step by step

for the rear lights, I added the following lines

[EMISSIVE_BRAKE_...]
NAME=TL_REFLECTOR
COLOR=63, 63, 63, 0.08
LAG=0.8
SIMULATE_HEATING=0.2
LOCATION=REAR
BIND_TO_HEADLIGHTS=0
CAST_LIGHT=1
CLUSTER_THRESHOLD=0.5

[EMISSIVE_LIGHT_...]
NAME=TL_REFLECTOR
COLOR=63, 63, 63, 0.09
LAG=0.8
SIMULATE_HEATING=0.2
LOCATION=REAR
BIND_TO_HEADLIGHTS=1
CAST_LIGHT=1
CLUSTER_THRESHOLD=0.5

View attachment 1484174

DRL on the C6 is ONLY the front flasher. As is, the car have the light switch at Parking, which illuminate the parking lights (front and rear side light, rear taillights and license plate lights)

 

[Tetri]

hey guys,

could someone test something for me : Using the broken kicker cars app https://www.overtake.gg/threads/broken-cars-kicker.277178/ , can you modify an ai car brake hint value in the app to a stupid value (like 0.2), exit the session, start it again and watch if the ai hints are called and applied at the start of the game if you don't open the app UI? If yes, the AI car should brake waaaay before normal straight after starting the game, without touching anything. If not, it should look like the ai car is not using the broken car app AI hints modifications. Then open the app UI, car hints, and see if they are applied.

If you have extra time, in Weekend mode, check if the ai hints are applied while switching from a session to another (practice->quali->race) when you don't call the app.

The LUA debug shows no hints are called until i open the app UI (and i don't see ai cars applying them anyway). The issue being, of course, the app is quite perf costly once the UI is open, and i don't want to open it each time i start a race. I also want the hints to be applied without checking twice in the lua debug.

I fixed it in the script but i want to make sure this is a new issue with latest CSP or whatever before reaching the app author with the corrective patch, and not an issue related to my own CSP/CM system.

 

[Perico Lospa]

... To avoid confusion/mistypes/misinterpretation, can you please upload the complete amended config?...

Good idea; when someone contributes a solution piecemeal, I'm always left wondering if I implemented it correctly, or if I missed something and installed it incorrectly...

 

[24H]

will have a look later and upload the ext_config

 

[ancient_3]

https://www.overtake.gg/downloads/rouen-les-essarts-update-madbrain-version.79478/

Here is the last main update for Rouen les Essarts :-)

Fixed many small things that took time (especially the small holes between meshes ... ) but the main work was creating the night lights that are now available for each layout.

I don't remember the track had lightning at any time so I mixed between normal road spot lights placed at the beginning or middle of each turns and special lightning near the finish line and the main stands. I thank a lot @leBluem for the object lightning because I used his ext-config.ini for the extralong version by MadBrain and there were already plenty of stuff.

Johnny Speed @overtake added new AI lines for 72-73 and 74-94 layouts that should be compatible with CSP 0.12.preview and former CSP versions.

I added VAO patches that I generated again with bakery optix, thanks to @RMi_wood that made the first version :-)

In the future, I'd like to add a new antenna for the modern layouts as it is not exactly like that in reality and also I'd have to modify the stands by adding two floors in white concrete with windows, so that it matches better the reality of the track in the 80's.

But for now I'll take a break with this track, just debugging things as the reports come, and my next focus will be on the blue flag and rain tyres change things in lua ;-)

 

[24H]

Changed the lights again.
Hope it´s okay now?

Schau dir mal das Bild an!

20251008-223151-shfy_studio-mby_chevy_c6_z06.jpg

www.directupload.eu

 

[MrHunt]

Hi.
This release is a bit different, it contains whole car (3d model and physics).
Unfortunately i don't know original author, but You can find it on overtake, folder name zs_rover_mini_newmap.
This mod has its own folder, so You can keep original mod.
I want to Thank forum member Pete82 for providing lots of technical info about a car, and testing it.

Car vas rescaled to realistic size, as i found original to small and not possible to fit 175/50R13 tires.
CG was moved a lot to front, as per technical info available for car.
Engine inertia tweaked to produce better throttle response as small engine should have.
Power curve adjusted to make realistic torque figures.
Drivetrain final ratio changed to realistic.
Suspension tweaked in a way to simulate very stiff setup with rubber cones.
Some aero tweaks to achieve realistic acceleration times.
Tires added a bit of grip, to represent modern Yokohama tires.
And other minor bugfixes.

Download.


View attachment 1484073

Huge mistake and Problem here:
You wrote: "Car vas rescaled to realistic size, as i found original to small and not possible to fit 175/50R13 tires."


The Mini Cooper and Sport 500 1996-2000 specifications are:

• Wheelbase: 80 inches / 203.2 cm
• Front Track: 48.2 inches / 122.4 cm
• Front Track (second entry): 46.2 inches
• Overall Length: 120.25 inches / 305.4 cm
• Overall Width: 55.5 inches / 141.0 cm
• Overall Height: 53 inches / 134.6 cm
• Ground Clearance: 6 inches
• Turning Circle: 28.23 feet

Weight

• Kerb Weight: 1,576 lbs

Fuel Tank

• Fuel Tank Capacity: 7.5 gallons

-------------------------------------------------------------------
Austin Mini-Cooper 997cc 1962-64 specifications:
Dimensions & Weight

• Wheelbase: 80 in / 203.2 cm
• Front Track: 48.2 in / 122.4 cm
• Rear Track: 45.9 in / 116.6 cm
• Overall Length: 120.25 in / 305.4 cm
• Overall Width: 55.5 in / 141.0 cm
• Overall Height: 53 in / 134.6 cm

Weight & Capacity

• Ground Clearance: 6 in / 15.2 cm
• Kerb Weight: 12.5 cwt / 1400 lbs (635 kg)
• Fuel Tank: 5.5 gallons / 20.8 liters

Both cars are Austin Minis from 1962 and 1996 and have nearly the same size in Real Life.

Austin Minis have always stayed the same size as best they could over the years. BMW was the first to change that with the new Mini, but the car you've enlarged is completely wrong and much too big. Should you make the tires smaller instead of enlarging the car, or leave the mod by the author "https://www.overtake.gg/downloads/mini-cooper-sport-500.70652/" as it was?

 

[FrustratedUse]

Huge mistake and Problem here:
You wrote: "Car vas rescaled to realistic size, as i found original to small and not possible to fit 175/50R13 tires."


The Mini Cooper and Sport 500 1996-2000 specifications are:

• Wheelbase: 80 inches / 203.2 cm
• Front Track: 48.2 inches / 122.4 cm
• Front Track (second entry): 46.2 inches
• Overall Length: 120.25 inches / 305.4 cm
• Overall Width: 55.5 inches / 141.0 cm
• Overall Height: 53 inches / 134.6 cm
• Ground Clearance: 6 inches
• Turning Circle: 28.23 feet

Weight

• Kerb Weight: 1,576 lbs

Fuel Tank

• Fuel Tank Capacity: 7.5 gallons

-------------------------------------------------------------------
Austin Mini-Cooper 997cc 1962-64 specifications:
Dimensions & Weight

• Wheelbase: 80 in / 203.2 cm
• Front Track: 48.2 in / 122.4 cm
• Rear Track: 45.9 in / 116.6 cm
• Overall Length: 120.25 in / 305.4 cm
• Overall Width: 55.5 in / 141.0 cm
• Overall Height: 53 in / 134.6 cm

Weight & Capacity

• Ground Clearance: 6 in / 15.2 cm
• Kerb Weight: 12.5 cwt / 1400 lbs (635 kg)
• Fuel Tank: 5.5 gallons / 20.8 liters

Both cars are Austin Minis from 1962 and 1996 and have nearly the same size in Real Life.
View attachment 1484293View attachment 1484294View attachment 1484295
Austin Minis have always stayed the same size as best they could over the years. BMW was the first to change that with the new Mini, but the car you've enlarged is completely wrong and much too big. Should you make the tires smaller instead of enlarging the car, or leave the mod by the author "ZS" as it was?

To add to it
This is the creator's original post
wasn't very hard to find lol

 

[Masscot]

Changed the lights again.
Hope it´s okay now?

Schau dir mal das Bild an!

20251008-223151-shfy_studio-mby_chevy_c6_z06.jpg

www.directupload.eu

Looks great! Will have a chance to test it when back home tomorrow morning. Thanks again.
You do know that you've now volunteered to provide similar fixes for all the other affected Maid Cafe cars, yes? Cool. Glad we cleared that up.


Edit: ah, the link is just for the image, not for the actual config?

 

[MasterFocus]

Almost! LIGHTS ON should have the front turn signals at 50% intensity and LOW BEAM (The one next to the flasher), HIGH BEAM being the "inside" lights

Changed the lights again.
Hope it´s okay now?

Schau dir mal das Bild an!

20251008-223151-shfy_studio-mby_chevy_c6_z06.jpg

www.directupload.eu

 

[Gabriele]

Delete

 

[Pilot3331]

Huge mistake and Problem here:
You wrote: "Car vas rescaled to realistic size, as i found original to small and not possible to fit 175/50R13 tires."


The Mini Cooper and Sport 500 1996-2000 specifications are:

• Wheelbase: 80 inches / 203.2 cm
• Front Track: 48.2 inches / 122.4 cm
• Front Track (second entry): 46.2 inches
• Overall Length: 120.25 inches / 305.4 cm
• Overall Width: 55.5 inches / 141.0 cm
• Overall Height: 53 inches / 134.6 cm
• Ground Clearance: 6 inches
• Turning Circle: 28.23 feet

Weight

• Kerb Weight: 1,576 lbs

Fuel Tank

• Fuel Tank Capacity: 7.5 gallons

-------------------------------------------------------------------
Austin Mini-Cooper 997cc 1962-64 specifications:
Dimensions & Weight

• Wheelbase: 80 in / 203.2 cm
• Front Track: 48.2 in / 122.4 cm
• Rear Track: 45.9 in / 116.6 cm
• Overall Length: 120.25 in / 305.4 cm
• Overall Width: 55.5 in / 141.0 cm
• Overall Height: 53 in / 134.6 cm

Weight & Capacity

• Ground Clearance: 6 in / 15.2 cm
• Kerb Weight: 12.5 cwt / 1400 lbs (635 kg)
• Fuel Tank: 5.5 gallons / 20.8 liters

Both cars are Austin Minis from 1962 and 1996 and have nearly the same size in Real Life.
View attachment 1484293View attachment 1484294View attachment 1484295
Austin Minis have always stayed the same size as best they could over the years. BMW was the first to change that with the new Mini, but the car you've enlarged is completely wrong and much too big. Should you make the tires smaller instead of enlarging the car, or leave the mod by the author "https://www.overtake.gg/downloads/mini-cooper-sport-500.70652/" as it

Did You measure original model in 3ds max, before making this post? Why do You think its correct, because its tiny?
If You not able to measure it, try comparing it side to side to modern mini and see if it is same size? But don't just use any modern mini as many rips suffer from incorrect scaling, but most of gran turismo rips have good scaling. Here is some examples how it should be Link
Here You can check metric diameter of this tire it is 506mm it means in asseto it should be 506mm thats how scaling works, You can not just make wheels smaller.
I don't see any proof in Your post, only picture which shows how tiny original mod is.
BTW plot twist: original author on overtake is Pete82 who contacted me and asked to help rework it. I did not know this at the moment of original post. In case You think I'm stealing other peoples mods for profit.

 

[Josuracer]

Did You measure original model in 3ds max, before making this post? Why do You think its correct, because its tiny?
If You not able to measure it, try comparing it side to side to modern mini and see if it is same size? But don't just use any modern mini as many rips suffer from incorrect scaling, but most of gran turismo rips have good scaling. Here is some examples how it should be Link
Here You can check metric diameter of this tire it is 506mm it means in asseto it should be 506mm thats how scaling works, You can not just make wheels smaller.
I don't see any proof in Your post, only picture which shows how tiny original mod is.
BTW plot twist: original author on overtake is Pete82 who contacted me and asked for rework. I did not know this at the moment of original post. In case You think I'm stealing other peoples mods for profit.

But please take in mind this: wheelbase of the real car is 203 or 204 cm, but your version is working with a 216.5 cm wheelbase, so the tiny model is more accurate; https://www.parkers.co.uk/rover/mini/saloon-1988/cooper-sport-500-2d/specs/ , https://www.classiccarportraits.co.uk/pages/Mini_Cooper_Sport500.htm , whats your source for the diameter of the tyre?

 

[Pilot3331]

But please take in mind this: wheelbase of the real car is 203 or 204 cm, but your version is working with a 216.5 cm wheelbase, so the tiny model is more accurate; https://www.parkers.co.uk/rover/mini/saloon-1988/cooper-sport-500-2d/specs/ , https://www.classiccarportraits.co.uk/pages/Mini_Cooper_Sport500.htm , whats your source for the diameter of the tyre?

Well spotted i must have made some mistake in geometry then. I will look into this. My source is authors request to use 175 50 r13 tyres. Its an optional sport tire for this model.

UPD:
Hmmm somethings off. i did f up somewhere in my measurements.
Now 3ds max shows me different (correct sizes for original model).
Only problem is cm showroom track and wheel size is off, wheelbase is good.
And in game car is floating, this made me think size is off in the first place.
Question is is kunos centimeters for tires are bigger than normal?

 

[sml44]

Hello, does anyone have all the skins for Formula RSS 1990 v12?

 

[Pete82]

Did You measure original model in 3ds max, before making this post? Why do You think its correct, because its tiny?
If You not able to measure it, try comparing it side to side to modern mini and see if it is same size? But don't just use any modern mini as many rips suffer from incorrect scaling, but most of gran turismo rips have good scaling. Here is some examples how it should be Link
Here You can check metric diameter of this tire it is 506mm it means in asseto it should be 506mm thats how scaling works, You can not just make wheels smaller.
I don't see any proof in Your post, only picture which shows how tiny original mod is.
BTW plot twist: original author on overtake is Pete82 who contacted me and asked to help rework it. I did not know this at the moment of original post. In case You think I'm stealing other peoples mods for profit.

This is my mod and I gived it Pilot3331 to improve a bit. Mini Cooper Sport 500 use for sure 175 50 r13 tires.

 

[holden0335]

Hello, does anyone have all the skins for Formula RSS 1990 v12?

Hello Here's my collection, which I've been able to find here and there (most of it on Overtake). I don't know if it's complete, but in any case, I managed to create the 90 championship. https://mega.nz/file/7M8h1aZb#_5QSjNMSYPDDG4X_1D_wpls6AUd--gwS-dzPszo-IPE

 

[Apocalypse211]

Hello, does anyone have all the skins for Formula RSS 1990 v12?

Sure. Download in the video description.

 

[andrevr]

This is my mod and I gived it Pilot3331 to improve a bit. Mini Cooper Sport 500 use for sure 175 50 r13 tires.

I might be mistaken but the model and your photo look to have very different fender flares. The model's flares curve much further in, no? Maybe the real car got bigger radius flares to accommodate the 13s?

 

[sml44]

Sure. Download in the video description.

Amazing guy, thank you so much. Could you check out your YouTube channel? I left you a message about the Zolder circuit.
Thank you.

 

[GT3Masters97]

Well spotted i must have made some mistake in geometry then. I will look into this. My source is authors request to use 175 50 r13 tyres. Its an optional sport tire for this model.

UPD:
Hmmm somethings off. i did f up somewhere in my measurements.
Now 3ds max shows me different (correct sizes for original model).
Only problem is cm showroom track and wheel size is off, wheelbase is good.
And in game car is floating, this made me think size is off in the first place.
Question is is kunos centimeters for tires are bigger than normal?
View attachment 1484345

View attachment 1484344

I'm telling you from my experience. Unfortunately I've been there too. As a first step, always measure all the key geometries and compare them with the official measurements. Also, study the model's accuracy by comparing it with visual references (blueprints or images). The TVR I published in the past taught me a lot... for example, the model was created wider at the rear than its real-life counterpart. 😶‍🌫️

 

[Apocalypse211]

Amazing guy, thank you so much. Could you check out your YouTube channel? I left you a message about the Zolder circuit.
Thank you.

Thanks. Can't find your message. What do you want to know about Zolder?

 

[Pilot3331]

I'm telling you from my experience. Unfortunately I've been there too. As a first step, always measure all the key geometries and compare them with the official measurements. Also, study the model's accuracy by comparing it with visual references (blueprints or images). The TVR I published in the past taught me a lot... for example, the model was created wider at the rear than its real-life counterpart. 😶‍🌫️

Thanks, i will be more careful doing and studying measurements.

 

[MrHunt]

Did You measure original model in 3ds max, before making this post? Why do You think its correct, because its tiny?
If You not able to measure it, try comparing it side to side to modern mini and see if it is same size? But don't just use any modern mini as many rips suffer from incorrect scaling, but most of gran turismo rips have good scaling. Here is some examples how it should be Link
Here You can check metric diameter of this tire it is 506mm it means in asseto it should be 506mm thats how scaling works, You can not just make wheels smaller.
I don't see any proof in Your post, only picture which shows how tiny original mod is.
BTW plot twist: original author on overtake is Pete82 who contacted me and asked to help rework it. I did not know this at the moment of original post. In case You think I'm stealing other peoples mods for profit.

You're misunderstanding everything.
I just wanted to point out that your modified mod is way too big, and that the old Mini Cooper (1960s) and the other mod one (1990s) are almost exactly the same size, like in real life. Regardless of what 3ds Max says, all Austin Mini Mods should be too small in your opinion, but they aren't. They fit, just your modified doesn't.
ABB, Pessio and even Sim Dream have the correct sized model.

You resized the whole model to much, it was perfect as it was. like @Josuracer wrote.
It's all just nonsense, it's not that bad and no trouble, everything is already hard enough, thanks for your work.

 

[Pilot3331]

You're misunderstanding everything.
I just wanted to point out that your modified mod is way too big, and that the old Mini Cooper (1960s) and the other mod one (1990s) are almost exactly the same size, like in real life. Regardless of what 3ds Max says, all Austin Mini Mods should be too small in your opinion, but they aren't. They fit, just your modified doesn't.
ABB, Pessio and even Sim Dream have the correct sized model.

You resized the whole model to much, it was perfect as it was. like @Josuracer wrote.
It's all just nonsense, it's not that bad and no trouble, everything is already hard enough, thanks for your work.

I was convinced at the moment. But now, all sorted. Well spotted, I had a bad feeling about it size, but cm wheel measurement put me off track. Now I'm reading that cm tire measurements was never accurate, and I should ignore it. Anyway, I will correct everything, thanks for pointing on it.

 

[Pedro Correia]

Hello guys! can anyone share cameras and/or camtool files for the track Nevada dragstrip?
Thanks in advance!

 

[Pilot3331]

Rescaled nonsense version is gone.
Here is updated original version.
I applied all physics fixes to old model and all suspension details are now as per book, Camber, clearance, toe, wheelbase, cg are all set to be correct.
Tire size is calculated from formulas provided on Overtake. And now it matches 3d model. Ignore Content manager size, its wrong.
Mod will overwrite original folder, so do backup in case.
Download.

 

[Pete82]

By the way, the Mini Cooper Sport 500 originally came in four factory colors.I ’ve never managed to reproduce them correctly in the game — I even wrote to Rover, BMW, and the British Motor Museum, but they kept referring me back and forth to each other.

If anyone’s brave enough and feels up to the challenge of recreating these colors, here they are: Solar Red, British Racing Green, Tahiti Blue, and Anthracite.

The blue is quite dark in real life, and so is the green. The red looks different in almost every photo, and it’s really hard to get the shade right. It’s not the same red you see on the Mini in Gran Turismo. I don’t have the exact hex codes — GPT gives wrong values.

 

[petercrill]

Lexus IS F 2007 Track Public Release!!
Download: https://www.mediafire.com/file/tlh0vs166roa4jl/lexus_is_f_track_101creative.rar/file
Converted From GT6
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal