Assetto Corsa PC Mods General DiscussionPC

[Barbe Rouge]

Dan Bucsa has updated the excellent 2006 Audi RS4:

Some of the changes:
Switched to clean glass for windscreen
Fixed missing wheel shadows
Matched steer lock for driver animation
Fixed collider position and size
Added exhaust shake
Optimised all texture formats
Changed default setup to best tyres

MegaNZ link for mod download:
https://mega.nz/#!PzJhHQrS!C-KHVUoC0W4ojEtswZP0qx6j_M9AxN_wgZiwqwUNcO4

And via google drive?

 

[Masscot]

Zenvo ts1 gt coming soon...
the model will be from csr 2.
View attachment 847474
View attachment 847475

Is this the same project as the one @K E N N E T H just released?

 

[K E N N E T H]

d

 

[Fanapryde]

Dang. Some beautiful modeling inside and out. Nice catch, bet it wont last for 45 minutes.

It's still there, just snatched it...

 

[Masscot]

Not sure whether the model came from one of these - haven't had a chance to check yet:
https://assettoland.wixsite.com/assettoland/shelby

Ah, of course - it's the original Kunos model.

 

[GzeroD]

Psst Bud. Looking for some 289?

 

[xezez]

If it's not inappropriate, I'd love to see a 'Legion Edition' Jaguar CX75 RC3. The one posted here:
https://www.gtplanet.net/forum/threads/assetto-corsa-pc-mod-discussion.307899/page-504#post-12852706

At the moment, it's pretty overcooked in the top speed department and totally undercooked in the handling department. But it would be great if it were great! I previously suggested it might be an appropriate challenger to the Brabham BT62 – as a track-only edition.

Any way I could tempt you to weave some magic on it GzeroD? (With permission from KENNETH)

(Paging Mr. KENNETH. Mr. KENNETH)

 

[K E N N E T H]

d

 

[xezez]

Here's one for anyone old enough to remember 'Death Race 2000'. It was even more mad than the original Mad Max.

It's complete rubbish, of course. Just like the film. But if you're under the influence of herbal assistance, I guarantee you'll have a good laugh at the very least

 

[xezez]

edit the car whatever you want, it's not my model after all (but remember to put my name in the credit ok)

EDIT: im not Mr, im still 14 XD

Ah. 14! I think I can remember that far back. Just!

Now here's some advice from someone more than three times your age: Be kind to strangers, don't hurt animals... and don't wear 'it' out and accidentally send yourself blind.

 

[K E N N E T H]

d

 

[xezez]

XD thanks for the information, I already kind to all stranger. example: I remember when I was 12, I was going to a mini-market, then I saw a middle-aged man. sitting in there has no food left. and suddenly my brain telling me to buy a 2 bottle of water and 1 snack after I pay on for. I give the old women a 1water bottle and also my couple of penny. so he can eat too. so many people now days judge people too quickly, but the truth is we don't know yet their story. sorry if this out of topics.

I don't care if that's 'off topic'. It's very cool that you were kind and had empathy for someone less fortunate. Makes me happy to know that!

 

[KJRacing81]

Here's one for anyone old enough to remember 'Death Race 2000'. It was even more mad than the original Mad Max.

It's complete rubbish, of course. Just like the film. But if you're under the influence of herbal assistance, I guarantee you'll have a good laugh at the very least

Now we need the whole films cast of cars and have our own death race... I can dream haha

 

[Spyrious]

Is there any possibility for a stock cx75?I have a version (don't remember from where) but it doesn't drive well.It has problem shifting gears

https://we.tl/t-ISPuzkVyOK

 

[Fanapryde]

1996 Lamborghini Diablo SV-R GT3

A nice car.
One thing that is a bit odd for me (I'm on a DD wheel): I have to lower the FFB about 50% (compared to what I use normally) to get an 'acceptable' resistance, but even then the wheels are fighting me to stay in the straight ahead position. The force needed to overcome the center position seems too high ?

 

[KJRacing81]

__custom_showroom_1567332907

• KJRacing81
• Sep 1, 2019
• 1

Converting trucks!

@Masscot @P1ButtPlug I am on with converting more Formula trucks, going OK so far and can be used as grid fillers but will take more time for dials etc. Should have a few models complete in a few days.

 

[saXXXon]

anyone up for adding timing and gridslots on Vaalerbanen? sitting here in 3DS Max and i dont understand a thing

 

[Masscot]

Here's one for anyone old enough to remember 'Death Race 2000'. It was even more mad than the original Mad Max.

It's complete rubbish, of course. Just like the film. But if you're under the influence of herbal assistance, I guarantee you'll have a good laugh at the very least

I've driven worse..!
Who fancies lining this and an SUV up at opposite ends of Mulsanne, hitting the gas and seeing what happens?

 

[safi hellie]

A nice car.
One thing that is a bit odd for me (I'm on a DD wheel): I have to lower the FFB about 50% (compared to what I use normally) to get an 'acceptable' resistance, but even then the wheels are fighting me to stay in the straight ahead position. The force needed to overcome the center position seems to high ?

That is the old steer assist. in car ini it is at 0.55 so i changed that to 1.
Then after that the steer force multi is for my set up too high so lowered that down to like 1.8.....

If someone is modding a car and they have really low steering gain in the wheel settings they will need to up the cars steer force multi, i run the TX wheel at 100 in control panel so i change the steer force multi a lot but only due to my other settings...
the steer assist at anything other than 1 for though is a no no...
Try changing that one thing and tell me how it feels now?

 

[Cote Dazur]

A nice car.
One thing that is a bit odd for me (I'm on a DD wheel): I have to lower the FFB about 50% (compared to what I use normally) to get an 'acceptable' resistance, but even then the wheels are fighting me to stay in the straight ahead position. The force needed to overcome the center position seems to high ?

Have you tried using the auto ffb adjustment in the in game apps?

@Masscot what makes this cobra special if it is based on the Kunos model?

@K E N N E T H it is better to avoid using caps when naming a car folder, it interferes with some patch features.

 

[GzeroD]

Psst Bud. Looking for some 289?

Bump. You know where to look.

 

[GzeroD]

If it's not inappropriate, I'd love to see a 'Legion Edition' Jaguar CX75 RC3....

Any way I could tempt you to weave some magic on it GzeroD?...

You got me interested enough to have a look but after driving other examples of Hypercars from Kunos et al, I think I'll give it a miss.
Lots of work to sort out all the stuff AC can simulate, to then just feel thoroughly underwhelmed by the result.
I'm too old for Hype-rcars.

 

[Masscot]

New (to me - to you?) GR4 Renault Alpine. Had a few of these but not the GR4 version.
I removed the mannequin in the passenger seat and did the normal hands/wheel synch shenanigans.
https://we.tl/t-Pee1lgqwYe

 

[GzeroD]

anyone up for adding timing and gridslots on Vaalerbanen? sitting here in 3DS Max and i dont understand a thing

[strike]Pass along a link and I'll take a look.[\strike] edit Found it.

 

[Masscot]

Bump. You know where to look.

Very nice!
Any chance of getting the driver to grab the shifter? It animates nicely but he misses it by six inches unfortunately. It's one of those VR immersion-killers.
Also, the view clips through the driver's face in VR and his head can't be removed in CM's analyse function. I think it might be an issue with this driver model - I've seen it before.

 

[Fanapryde]

That is the old steer assist. in car ini it is at 0.55 so i changed that to 1.
Then after that the steer force multi is for my set up too high so lowered that down to like 1.8.....

Thanks, that did the trick. I never needed to change any of these values before. Also used 1 and then 2.8, which gives about the same feeling as similar cars.

Have you tried using the auto ffb adjustment in the in game apps?

A setting that I don't know / have ?
I use FFB Clip with the same setting (additional to my Simucube values) for all cars (15).
For this car (without the above trick), I lowered FFB clip to 8, which was an acceptable 'strength', but the center spring was still way too high.

 

[xezez]

You got me interested enough to have a look but after driving other examples of Hypercars from Kunos et al, I think I'll give it a miss.
Lots of work to sort out all the stuff AC can simulate, to then just feel thoroughly underwhelmed by the result.
I'm too old for Hype-rcars.

Oh well. Thanks all the same.

For the record, I'm not a 'hypercar guy' either. They're not my thing at all... and I'm 'too old' too. Old enough that I was picturing the CX75 being reconfigured like a modern 60/70's prototype. Those I do like!

 

[Cote Dazur]

Thanks, that did the trick. I never needed to change any of these values before. Also used 1 and then 2.8, which gives about the same feeling as similar cars.



A setting that I don't know / have ?
I use FFB Clip with the same setting (additional to my Simucube values) for all cars (15).
For this car (without the above trick), I lowered FFB clip to 8, which was an acceptable 'strength', but the center spring was still way too high.

It is with all the apps in the right side of the screen in game, it is called Force Feedback Controller, you start auto ffb in the menu (you will have to unpack data to see the auto FFB), do 2 laps, save and you are done. this what Aris uses to fine tune FFB for each car.

 

[Masscot]

@Masscot what makes this cobra special if it is based on the Kunos model?

Smaller engine, different setup.

 

[GzeroD]

Very nice!
Any chance of getting the driver to grab the shifter? It animates nicely but he misses it by six inches unfortunately. It's one of those VR immersion-killers.
Also, the view clips through the driver's face in VR and his head can't be removed in CM's analyse function. I think it might be an issue with this driver model - I've seen it before.

Disabled shifting anim', as I can't actually fix that.
And hope I got the right objects to cull for that driver model.
Next you'll be telling me the Steering wheel passes through the Drivers legs? (insert some esoteric punctuation here to make it clear I have my tongue in my cheek.)