Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 146,839 comments
  • 43,705,994 views
Hi everyone, first time on here and so much information! I've been trying to fix the AI files for those god-awful SimDream mods.

I notice that the AI approach the turns very very slowly which makes it suuuuuuper easy to pass even on 100% Difficulty. Do you think by increasing the Gas_Brake_Lookahead number this will help bring in more corner entry?

Appreciate your collective help on fixing this issue.
 

Attachments

  • Screenshot 2022-02-13 at 19.03.23.png
    Screenshot 2022-02-13 at 19.03.23.png
    27 KB · Views: 20
KevinK2
Try reducing BRAKE_HINT a little at a time. When the car is no longer missing the initial turn, then tune the TRAIL_HINT, a higher number will open up the exit, a lower number will make the car exit tighter. Check your adjustments on several tracks that you know have good track ai, with a variety of turns.

Oh yeah, almost forgot, AERO_HINTS being too high will also cause cars to miss corner entry. If the ai seem abnormally fast on the straights in comparison to your target competition ai, or yourself for that matter, reducing this number will help the car in corner entry as well, especially in high speed sweepers.
Click to expand...
This is invaluable stuff! Brilliant, looking forward to fine tuning later. Thank you 👍
 
lorelord
Porsche Carrera GT-R - Update (1.1)

New Version Available

  • Small fixes including collider ini.
  • Fuel tank relocated to correct position
  • Engine sound modified

Enjoy!

https://www.patreon.com/TMWMods (its free)
Click to expand...

Good afternoon I changed the Support Shifter to =1, because, in the animation, the pilot changes gears on the lever, but this change occurs on the paddles. After that, the car is still "braked", without moving...
Screenshot_tmw_porsche_carrera_gtr_toronto_13-1-122-13-8-6.jpg



EDIT: I SOLVE, IS NEED CHANGE SUPPORT PADLE, WITHOUT COMPACT DATA FOLDER
 
Last edited:
bluepeter
Nice discovery..... AC now shuts down instantly.....
Click to expand...
You can't break your AC by deleting that file. In fact, I just experimented renaming the whole 20 000+ files Assetto Corsa -folder from my documents and game started normally, automatically creating any folder and file it needs to run itself.
 
JRob66
The ones I'm after in particular are the Mazda, Subaru, Mustang, Hyundai, Jaguar, Peugeot RCZ So basically majority of them haha
Click to expand...
What you’re looking for is the Circuit Hawaii CT3 pack from Chivas Autoart then. I’ll tell you now I’m 95% sure the Mustang, Hyundai and Jaguar don’t exist in Assetto Corsa. But the CT3 pack has the RCZ, WRX and Corvette in it.

You can find that pack on their Facebook page.

They said in 2019 they were going to be doing most of them, but so far only the three exist in public release form.
 
Last edited:
MisterWaffles
What you’re looking for is the Circuit Hawaii CT3 pack from Chivas Autoart then. I’ll tell you now I’m 95% sure the Mustang, Hyundai and Jaguar don’t exist in Assetto Corsa. But the CT3 pack has the RCZ, WRX and Corvette in it.

You can find that pack on their Facebook page.

They said in 2019 they were going to be doing most of them, but so far only the three exist in public release form.
Click to expand...
literally just managed to find this! I've definitely seen a video with both of the Mazda's on YouTube at some point but can't find them.
 
JRob66
literally just managed to find this! I've definitely seen a video with both of the Mazda's on YouTube at some point but can't find them.
Click to expand...
Also this skin pack is pretty essential for those cars, it’s the default livery from the game for each of them. There’s also a readme on where to find a supplementary Mustang mod.

GOLD3N's Gran Turismo Sport Gr.3 Skin Pack #2

After getting back into skinning, Chivas finally released his CT3 (Gr.3) Cars to the public and now I can finally release this pack. New skins for Chivas CT3 cars that recently came out and the marc mustang from BE_MODDING. -Enjoy...
www.racedepartment.com www.racedepartment.com
 
RMi_wood
Funabashi Circuit v1.01

Features:
  • 20 vehicle pit/grid
  • 3 historical layouts
  • GrassFx, RainFx, VAO
  • New textures + winter grass skin
  • Track limit tires are semi-realistic
  • Try the "short" track!

Credits:

Domo arigato:
Thank you to "soramame" for granting permission to convert his original work.
Thank you to the JGT Database Discord group for requesting this track to be converted, suport and the great reference library
https://discord.gg/eTsX42m8h3 = The biggest history server on Japanese motorsport you'll ever see!

:: DOWNLOAD ::
:: RD MIRROR ::
Click to expand...
Great conversion, I've tested all 3 layouts ;)
Sincerely i did'nt know this track ...
I think long is the most difficult while the short is fun also with small sporty cars.
Thanks a lot ;)
Here it is an hotlap of the long layout!
 
pk3r72owns
Hi Guys,

Circuit of the Northwest is now available to all :)

Circuit Of The Northwest

Circuit of the northwest is an upcoming track designed in the Pacific Northwest. The Tilke-designed road course is a blast to drive, and although unfinished in real life (as of February 2022) This version of the track for Assetto Corsa has been...
www.racedepartment.com www.racedepartment.com



Enjoy!
Click to expand...

Toronto update is looking great too. Better FPS and the 30 pits really helps. Thanks again from Canada!

edit - here is a link for some cams i found

Toronto Indycar Exhibition Place cameras

Finally, some good soul made this track for AC, too. Still WIP. So, I wanted some TV replay action for me and got some quick ones done to share here: - TV 1 - TV Static If you have one camera file already, these two sets will be placed after...
www.racedepartment.com www.racedepartment.com

this version has no cams so you need to rename them to
cameras.ini
and
cameras_1.ini
before they will work.
 
Last edited:
Hi guys sorry for the question are there additional tv cams for the Zandvoort track converted from rf2 thanks for the kind answers.
 
pashini90
Hi everyone, first time on here and so much information! I've been trying to fix the AI files for those god-awful SimDream mods.

I notice that the AI approach the turns very very slowly which makes it suuuuuuper easy to pass even on 100% Difficulty. Do you think by increasing the Gas_Brake_Lookahead number this will help bring in more corner entry?

Appreciate your collective help on fixing this issue.
Click to expand...
Look 3 or 4 posts above yours. I asked a very similar question, the answer I got might help you!
 
Aaron Green
I cant recall who mentioned it the other day about tuning the AI.ini file in the data folder. Im working on a hybrid car to match the VRC cars, what im noticing is that the car goes into the corners perhaps a little too fast for its grip, be it that it may not be looking far enough ahead? Or that it doesnt have enough steer gain? It seems to miss the initial turn in, the middle part of the corner is a wash out and then it cuts back in and exits tightly, fast corners it tends to understeer out wide and clip barriers. Here are the settings, which area should i edit to correct the mentioned issues?

[GEARS]
UP=8300
DOWN=85
SLIP_THRESHOLD=0.1
GAS_CUTOFF_TIME=0.0

[PEDALS]
GASGAIN=0.25
BRAKE_HINT=0.95
TRAIL_HINT=1

[STEER]
STEER_GAIN=1.6

[LOOKAHEAD]
BASE=22
GAS_BRAKE_LOOKAHEAD=0
SPEED_GAIN=0.25

[ULTRA_GRIP]
VALUE=1.23
[PHYSICS_HINTS]
AERO_HINT=1

[TYRES]
HINT=1

THANKS!!!!
Click to expand...
Use the Dev Apps AI App and engage AI takeover with cntrl-c. This is the way to figure out what your AI is doing and how it's acting. You can make changes in here.
Also, my opinion, in any of the packs I use, I always lower ultra_grip to 1.0. It makes for a more realistic experience. Obviously if certain cars are spinning out or losing too much time you can bring it back up to taste but I haven't found that the case in any of the packs I use. That 20% extra is what also allows the AI to do the pit maneuver and spin you out from behind once they touch your rear bumper.
 
hi iin CM when I'm aligning data and updating the model the wheels and everything lines up but a suspension piece randomly flies up. the car is the rss f1 79

during the race the front wheels sink into the ground. does anyone have an idea of what I'm doing wrong.
 
Simple question. Is 1.0 the lowest value a Material can have for ksSpecularEXP?

I have an tree object I made in 3DSimED whose material values has 0.00000 for ksSpecularEXP. In the game when I use object inspector, it lists it as 1.0. I even tried to export the .fbx and edit it in kseditor and it still comes out to 1 for ksSpecularEXP so I thought maybe that was as low as it can go.
 
Last edited:
Looking for any possible insights into a problem I'm trying to sort:

I run a 49" ultrawidescreen monitor and with a number of car mods, when watching replays, onboard and/or on-car camera shots that see the car body or cockpit interior don't render enough of the car's bodypanels to reach the edge of the 32:9 frame.

Is there anything among the camera files (or any other file) that determines what parts of a car or shot are left unrendered to save processing power (as they're presumed to be off-screen)? It seems that in some mods/camera files, a 16:9 frame is assumed to be the maximum width.

Generally, I don't have the same problem with track cameras. It's only with on-car cameras.

EDIT: I only just realised that people running triple monitors may experience the same issue. Is that the case?
 
Last edited:
Fanapryde
They look great, e.g. this detail of the GT2 RS: 👍

View attachment 1113225

One thing though, it might be usefull to set the neutral lock (LOCK_N) to 1 in the downshift protection.
I did that for myself, but I can't pack the data again.
Click to expand...
Thx 🥰 The exhaust is a collaboration between Benjamin and me. He modeled the details and I textured it.
Thanks for the hint. I'll pass this on to the team so we can include it in the next update.
 
Beezer215
Use the Dev Apps AI App and engage AI takeover with cntrl-c. This is the way to figure out what your AI is doing and how it's acting. You can make changes in here.
Also, my opinion, in any of the packs I use, I always lower ultra_grip to 1.0. It makes for a more realistic experience. Obviously if certain cars are spinning out or losing too much time you can bring it back up to taste but I haven't found that the case in any of the packs I use. That 20% extra is what also allows the AI to do the pit maneuver and spin you out from behind once they touch your rear bumper.
Click to expand...
I agree with Beezer215 on the Ultra Grip.
Also try this:
GAS_BRAKE_LOOKAHEAD=3

This will make the AI more reserved in their corner entry speed. Reducing BRAKE_HINT will also make them brake a bit earlier.
A good track to test this on is Mosport. The double right hander in the middle of the circuit will test if your AI can keep it on the road.
 
ales100i
For me the best 80s f1 car is the f1-87 made by Matteo Vignaroli aka ACR. Years in the making, tweaking. When you drive it just feels like a brutal f1 car from that period should. How realistic is it? Who knows. Technically everything is correct as far as I know. Anyway as an option for those who like to drive these cars. You can find it in his FB group under files. He also made a full 87 season skin pack for the car. I won't share a direct link, cause who knows if he allows it, but go to his group and find it. Has some other nice cars there as well (especially Ferrari's), worth a browse through his files:

Click to expand...
I did try that. Car itself is pretty good, but the mirrors are crooked, so that ruins the experience for me.
 
Masscot
Had to change the folder name so that Mazda Cosmo Sport would record mileage properly, so looked at some minor cosmetic tweaks at the same time.
Will install as a new car, so the original is preserved. Thanks to なんだこぱんだ and to anyone else who brings these unique classic cars to AC in a car park flooded with modern BMWs and Porsches.

View attachment 1112278

v1.1
Changelog:
folder name changed to record mileage correctly; rear/brake light brightness adjusted; cockpit lightened; instrument dials now more readable in daytime; new paints; driver rescaled/repositioned; 'happy ending' shifting animation added; 60s driver, suits & gloves added; steer ratio corrected; very basic LODs added; UI detail added; audio swapped; folder size reduced from 558Mb to 334Mb

Click to expand...
Masscot
Had to change the folder name so that Mazda Cosmo Sport would record mileage properly, so looked at some minor cosmetic tweaks at the same time.
Will install as a new car, so the original is preserved. Thanks to なんだこぱんだ and to anyone else who brings these unique classic cars to AC in a car park flooded with modern BMWs and Porsches.

View attachment 1112278

v1.1
Changelog:
folder name changed to record mileage correctly; rear/brake light brightness adjusted; cockpit lightened; instrument dials now more readable in daytime; new paints; driver rescaled/repositioned; 'happy ending' shifting animation added; 60s driver, suits & gloves added; steer ratio corrected; very basic LODs added; UI detail added; audio swapped; folder size reduced from 558Mb to 334Mb

www.mediafire.com

m_mazda_cosmosport

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Hello. It's mine mod. I basically don't allow secondary distribution. I wrote "If you have some problem or issue, please contact me."
This time I will turn a blind eye to. so please do not do it again. If you want to distribute this mod, contact me from now on.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
23 24 25
Replies
721
Views
138K
Beezer215
Beezer215
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
3K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
8K
OH1955
OH1955
Famine
Assetto Corsa Competizione Ultimate Edition Now Available on Steam
Replies
8
Views
8K
Apocalypse211
Apocalypse211
GTPNewsWire
Assetto Corsa Modder Creates Real Road Circuit Using Photogrammetry
Replies
16
Views
17K
Perico Lospa
Perico Lospa

Latest Posts

Back