Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 157,290 comments
  • 51,164,263 views
Haunebu52
Does anyone know why my Objects Inspector no longer selects the track? It doesn't matter what track, it refuses to select any track surface... was there some new setting or something with CSP or CM?
Click to expand...

CrisT86
Latest CSP patch are bugged as hell. Latest one which works fine is the 0.2.3-p1


Once loaded i can't see the sea, the only way to see it is to convert it in SEA via config (but this makes also the island sorrounding the sea waterish. Can you please check it?
Click to expand...
After many bugfixes and many settings related changes, maybe its a try to reset your CSP settings to defaults.
Could be there is just one little settings which causes this bug, but the setting was wrong in the first place but it didn't cause the bug.
Just do this:
Goto /Documents/Assetto Corsa/cfg/ rename the "extension" folder to something different. Restart CM. It will create a new "extension" folder. You can restore it later.
 
Last edited:
MasterFocus
Latest everything here and object inspector works fine

View attachment 1378330
Click to expand...
I tested few version and after the one i reported, i have this issue (not every object gets selected at all) since that. Don't know if there's anything to activate, but i have to stick with an older version to keep doing my configs, if not, there's no way to do them.

Try click different objects here and there, randomly.
 
CrisT86
I tested few version and after the one i reported, i have this issue (not every object gets selected at all) since that. Don't know if there's anything to activate, but i have to stick with an older version to keep doing my configs, if not, there's no way to do them.

Try click different objects here and there, randomly.
Click to expand...
Tried Kunos track with a Kunos car and still can select everything :confused:
 
MasterFocus
Tried Kunos track with a Kunos car and still can select everything :confused:
Click to expand...
Try it, if you and when you can, on modded tracks. It's a tool that i never use with stock tracks-cars (on over 500 config i did in years, i worked only on Red Bull Ring with Racinjoe013 for stock base tracks).

Anyway as said, it allow to select something, but it won't select something else (sometimes it allow me to select road, but not banners, sometimes viceversa bases always on different tracks). If start happens on track x, on the road mesh, it always keep doing the same whatever i do.
 
CrisT86
Try it, if you and when you can, on modded tracks. It's a tool that i never use with stock tracks-cars (on over 500 config i did in years, i worked only on Red Bull Ring with Racinjoe013 for stock base tracks).

Anyway as said, it allow to select something, but it won't select something else (sometimes it allow me to select road, but not banners, sometimes viceversa bases always on different tracks). If start happens on track x, on the road mesh, it always keep doing the same whatever i do.
Click to expand...
I've tested on a few modded tracks, couldn't repeat the problem without an user error :D
The user error was having the object behind the MapDisplay Full app...
 
New version of Origin Icons now live: https://www.overtake.gg/downloads/origin-icons.28078/

Added Icons:

addedicons.png
 
ThirdEye7
Would anyone have any clue why certain tracks like vhe_hockenheim 1.6 would be missing textures like in the picture below?
View attachment 1377452

I'm also having issues with vn_goldcoastakv888 missing nearly all kerbs and walls.
View attachment 1377453

I've tried redownloading and reinstalling them but the same problem has persisted.

EDIT: It looks like it was something to do with a setting called deduplicate textures. Such a headache from a singular tick box. :banghead:
Click to expand...
where can i find this track version ?
 
Mikke73
I've tested on a few modded tracks, couldn't repeat the problem without an user error :D
The user error was having the object behind the MapDisplay Full app...
Click to expand...
As said, i made over 500 configs (from public to private) so i should know how object inspector works as today :D
Till the patche 0.2.3-p1 no issue at all with the object inspector. From that on, all have the same problem even they affect different part of tracks from track to track. Don't know if there's anything that need to be turned on in CM or not to let works fine since the next patch version that works fine for me.
 
kpcart
i find in 2024, changing drivers is not worth the effort, you cant notice the at max maybe 1 to 2% difference. back in the old days of 3dfx cards in 1998 or whatever it was, driver versions could make a big difference. but now it is mostly about graphics settings that you select. i just upgraded my nvidia 2060 driver first time in 2 years and notice zero difference in performance anywhere.. except for cyberpunk 2077, but that is just a terribly optimised game.
Click to expand...
@kpcart: Followed your remarks and advice, DDU-ed latest Quadro driver and installed Studio (SD), version 537.58 afterwards. NV 537.58 seems best according to all I've read so far. Usage of Studio driver recommended by Peter Boese. So...fixed for the next coming years :D. Have a good day all.
 
Does anyone know how to remove the pit crew animation when you pit? I'm currently working on a retro GT Championship and I've edited the pitstop lengths for each car. What with the 15-20 second pitstops the pit crews look ridiculous and immersion killing as they moooooovvvvvvvveeeeeee reeeeeeeeeeeeaaaaaaalllllyyyyyyy sllllllooooooowwwwww.
 
Tetri
Oh, i 've done a few variations for a suscriber of the Natural mod ppfilter. There's barely anything left of the original script nor color grading of the original, guy said they were awesome (and i still use them on a daily basis) but never got me more feedback. Since i've been fecking around with ppfilters for a while maybe you would tell me how they compare?

Here's the link to copy directly in your assetto folder, there are color grading LUTS that CM won't pick :
www.mediafire.com

Tetri Baron ppf 0.9

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

The "Tetri Baron 3" is the one i use the most, Baron 2 is a variation with less light/a bit more sadly realistic for Reshade.

To-do list left on it : adjusting the greens (it's always the greens), maybe install a "glaring" slider, and a few minor twitchs with sunbinding, fog adaptation etc. Same with night settings, haven't played with those yet.

I always use Reshade on final coat but if you could tell me if they work well just like this (you can tell me that they suck on your side as well) or if you find a fundamental flaw out of the box (too bright/contrasty/saturated etc) i would appreciate, never got feedback on those.
Click to expand...
Alright so it of course changes wildly depending on anyone’s particular screen/setup but for me (in VR on an HP Reverb G2) but both of the filters are rather whitewashed to me, but I also don’t use reshade because it was not available in VR when I set up my system (and still may not be).

One thing I can comment on is they are both pretty resource heavy, especially TB2. I ran three sessions doing the exact same thing just changing filter (warm up lap followed by hot lap followed by a few donuts at the Andretti hairpin to get some graphic intensive tire smoke) and TB2 had the lowest average frame rates, with TB3 about 4% better, both using skydomes. I then tried the same with my normal setup (“Natural Mod” albeit with 3D clouds, which should’ve handicapped it further) and I averaged 5% better FPS than TB3.

This again is solely based on my system, which is very much resource limited because of VR, LCD screens in my headset (which will look very different from, say, OLED screens) and my admittedly aging machine. Keep it up though and thanks for sharing!

Edit: sorry for taking so long to respond, spent most of the weekend at the emergency vet for my pup so I didn’t have a chance to try until late last night.
 
Last edited:
ninezeroniner
- Quick and dirty plates with racing numbers for 101creative's Lotus Elise Cup 1996 -

View attachment 1378119



  • back-up car.
  • drop these files in the "skins" folder of the "lotus_elise_cup_1996" car by 101creative , overwrite.
  • these files are not skins, mind you, just add-ons for existing skins.
  • includes random driver name for every skin so your Crewchief is gonna like it, as well as basic preview image.
Click to expand...
another little add-on...

- Quick and dirty rear eurocup plate for 101creative's Lotus Elise Cup 1996 -

lotuz2.jpg


Lotus Elise Cup 1996 skins add-on B (Cup Rear Plate)

For the "lotus_elise_cup_1996" car by 101creative back-up car. delete every "Plate_D.dds" and "Plate_NM.dss" from each and every skin folder of the car. drag or copy the "plate_d.dss" into each and every skin folder of the car.
www.gtplanet.net www.gtplanet.net
  • back-up car.
  • delete every "Plate_D.dds" and "Plate_NM.dss" from each and every skin folder of the car.
  • drag or copy the "plate_d.dss" into each and every skin folder of the car.
 
Can someone post the ext_config.ini from Spa? I replaced it with treeFX but even my 4070 is underpowered in turn1 with a full grid of GT3s 🫠
 
MS6Driver
Can someone post the ext_config.ini from Spa? I replaced it with treeFX but even my 4070 is underpowered in turn1 with a full grid of GT3s 🫠
Click to expand...
The one from @MoriSan on Overtake?
You can rem the two sections out, that he provided, and you're back to square one.
Like....

[INCLUDE]
;INCLUDE=treeFX.ini

;[MODEL_REPLACEMENT_...]
;FILE= spa.kn5
;HIDE= ;A,AA,AB,AC,AD,AE,AF,AG,AH,AI,AJ,AK,AL,AM,AN,AO,AP,AQ,AR,AS,AT,AU,AV,AW,AX,AY,AZ,B,BA,BB,BC,BD,BE,BF,BG,BJ,BK,BL,BM,BN,BO,BP,BQ,BR,BS,BT,BU,BV,BW,BX,BY,BZ,C,CA,CB,D,E,F,FA,FB,FC,FD,FF,FO,FP,FQ,FS,Forest010,G,H,I,J,K,L,Line6597,Line6598,Line6599,Line6600,Line6601,Line6606,Line6836,Line6955,Line8193,Line8649,M,N,O,P,Q,R,S,Shape269,T,U,V,X,Y,Z,tree_cast?, shadow3d?
 
Last edited:
CrisT86
As said, i made over 500 configs (from public to private) so i should know how object inspector works as today :D
Till the patche 0.2.3-p1 no issue at all with the object inspector. From that on, all have the same problem even they affect different part of tracks from track to track. Don't know if there's anything that need to be turned on in CM or not to let works fine since the next patch version that works fine for me.
Click to expand...
Could you give me the exact situation, so i can repeat it and test things.
track, car, mabe screenshot of your whole screen where you click. I'm just trying to pack this into a report for CSP
 
Cote Dazur

  • Since you are using open composite, you might want to adjust the brightnees in OpenXR tool kit
Individual Controls

These are adjusting individual enhancements settings and they allow fine tuning the image displaying in the headset:

  • Contrast: Adjusts the difference between bright and dark pixels (Neutral: 50).
  • Brightness: Adjusts those pixels that are not already extremely bright (preserves the highlights) and adjusts midtones, aka gamma (Neutral: 50).
  • Exposure: Adjusts the brightness or darkness of the entire image (Neutral: 50).
  • Saturation: Adjusts the colorfullness of the entire image. It affects all colors and pixels in the image equally, regardless of how saturated they already are (Neutral: 50).
  • Vibrance: Adjusts the intensity of the more muted colors while leaving the saturated colors untouched (Neutral: 0).
  • Highlights: Adjusts the highlight details in reducing the intensity of the brightest pixels (Neutral: 100).
  • Shadows: Adjusts the details that appear in shadows in brightening the darkest pixels (Neutral: 0).
Click to expand...
Good idea. I'm already running foveated rendering with the OpenXR toolkit, but adjusting these settings never crossed my mind.

Too bad the toolkit is deprecated software, even though it still works just fine for most OpenXR games. It really has some nice features.

And OpenXR is a well defined and widely used standard, so the toolkit will probably have a pretty long life, even without any updates. (As long as Meta stops breaking OpenXR functionality every other update..)
 
Peter Boese
Could you give me the exact situation, so i can repeat it and test things.
track, car, mabe screenshot of your whole screen where you click. I'm just trying to pack this into a report for CSP
Click to expand...
I will record a video as soon as i will hit my pc where i have AC installed. I will DM you ok @Peter Boese? Thanks

Anyway: all modded tracks, whatever car. Depends on modded track-to modded track when and on which mesh/material happens. Tested with various CSP patches. The only which works fine is, as said, the 0.2.3-preview 1. All the ones i tested later than that one, have this issue (both on old and new pc).

Basically when happens, i'm in free mode (F4) you can select an object on the track which became highlighted, if you select something else that is affected by the issue, you can click how many times you want, but you CAN'T select it, it seems a "transparent" object.
 
Last edited:
Hi Gentlemen !

Please, help me !
I’m using the last CSP 0.2.4 (available version) in CM.

Maybe I got brain disease, cognitive issues, all is possible but I think since this last version, the default replay camera is the cockpit view… all right !?
Before, It seems to me it was the first outside camera view and it was perfect for me.

So, my brain took suddenly brain damage or the change had be done with the 0.2.4 version ?
So, how is it possible to get back to my favorite first replay camera as before ?

Thanks a lot for your help.

Cheers.
 
Elio92
Hi Gentlemen !

Please, help me !
I’m using the last CSP 0.2.4 (available version) in CM.

Maybe I got brain disease, cognitive issues, all is possible but I think since this last version, the default replay camera is the cockpit view… all right !?
Before, It seems to me it was the first outside camera view and it was perfect for me.

So, my brain took suddenly brain damage or the change had be done with the 0.2.4 version ?
So, how is it possible to get back to my favorite first replay camera as before ?

Thanks a lot for your help.

Cheers.
Click to expand...
Yes, latest version (tested in order to try to see if the problems above were solved) i have the same issue too. The default camera is the cockpit view and not the cameras.ini
 
Elio92
Hi Gentlemen !

Please, help me !
I’m using the last CSP 0.2.4 (available version) in CM.

Maybe I got brain disease, cognitive issues, all is possible but I think since this last version, the default replay camera is the cockpit view… all right !?
Before, It seems to me it was the first outside camera view and it was perfect for me.

So, my brain took suddenly brain damage or the change had be done with the 0.2.4 version ?
So, how is it possible to get back to my favorite first replay camera as before ?

Thanks a lot for your help.

Cheers.
Click to expand...
Japp, I asked myself already the same question. I think there is some setting somewhere where you can define this, but still searching...

Edit: found it @Elio92

1722881709975.png
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
5K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
43 44 45
Replies
1K
Views
290K
Beezer215
Beezer215
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
252
Views
48K
Apocalypse211
Apocalypse211
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
21K
Cote Dazur
Cote Dazur
Back