Assetto Corsa PC Mods General DiscussionPC

[andrevr]

thanks . so any 68 or 69 version is somewhere? I'm just try to find all tracks we race with GPL at late 90s !!!

@Breathe 's list has The 1974 @Zwiss version which I like best, and @Marneus_boss added an extra layout which I believe gets us back to 1970.
racingcircuits.info says that the first changes to the circuit only happened in 1976, reprofiling of turn 1 and then a chicane.
So, try those two and see which you like? Line 1819 and 1820 on the Real tab.

 

[racealot]

...and while the community is liking this mod (thank you @JK1977), here's another fictional livery - DTM Jägermeister #27

 

[Rodger Davies]

New car from Velo's Workshop, Lancia D24 Sports 1953

https://www.mediafire.com/file/pvl5vu8n3e44uns/lancia_d24_sports.7z/file

View attachment 1382263

It's beautiful..... one of my favourite cars ever - thanks Paul, you continue to exhibit your excellent taste in vintage cars!

The model is 800k so good to know Paul is working on LoDs. Also, object count is good and the actual car body is very well made/optimised. For example, the main exterior of the car is about 40k polys, but this Pininfarina badge is 62k.

Some relatively 'easy wins' Paul if you're reading, or if anyone's willing to contribute.

• Exhaust - 15k
• Tyres - 4x40k = 160k
• Painted clips - 40k
• Unpainted boot clips - 10k
• Lancia badge - 40k

 

[StoffelWaffle]

7 bucks for a single FM4 conversion ??? These mofos... I really should've released the 350 cars I ported from FM3/4/FH1 I would've made mad money lmao

Then again I have a job, so...

 

[MasterFocus]

It's beautiful..... one of my favourite cars ever - thanks Paul, you continue to exhibit your excellent taste in vintage cars!

The model is 800k so good to know Paul is working on LoDs. Also, object count is good and the actual car body is very well made/optimised. For example, the main exterior of the car is about 40k polys, but this Pininfarina badge is 62k.


View attachment 1382274


Some relatively 'easy wins' Paul if you're reading, or if anyone's willing to contribute.

• Exhaust - 15k
• Tyres - 4x40k = 160k
• Painted clips - 40k
• Unpainted boot clips - 10k
• Lancia badge - 40k

 

[Rodger Davies]

It's beautiful..... one of my favourite cars ever - thanks Paul, you continue to exhibit your excellent taste in vintage cars!

The model is 800k so good to know Paul is working on LoDs. Also, object count is good and the actual car body is very well made/optimised. For example, the main exterior of the car is about 40k polys, but this Pininfarina badge is 62k.


View attachment 1382274


Some relatively 'easy wins' Paul if you're reading, or if anyone's willing to contribute.

• Exhaust - 15k
• Tyres - 4x40k = 160k
• Painted clips - 40k
• Unpainted boot clips - 10k
• Lancia badge - 40k

Just a note that Paul is actually working on LoDs for this, as mentioned in his FB post here:

 

[Greg_ST]

Trying to make the Nissan R33 JGTC 1998 [FM8] easy to be painted with a "normal" AO map
if someone has already started to mod this car or has better knowledge and wants to work together, send me a massage
I don't have good skills with 3d models or FM8 cars

 

[Cote Dazur]

I really should've released the 350 cars I ported from FM3/4/FH1

I always wondered why you did not?

 

[StoffelWaffle]

I always wondered why you did not?

Because EASY exists lmao (and also who needs them ? I just did it to see if I could, I can so I stopped)

A portion of those... Others I don't know where I put 'em, maybe they were deleted.

 

[24H]

that´s a nice collection

 

[sDmD13]

Track Previews

Extract and then copy only tracks you have installed into the tracks folder of Assetto Corsa. C:\Program Files\Steam\steamapps\assettocorsa\content\tracks

www.overtake.gg

has someone some new "outline" files like this laying around?

 

[Daniel Graf]

Manage to snag this... Not the best of quality.
View attachment 1382141


We're eating good tonight boys. Thank you @JK1977 & @Zin5ki.

View attachment 1382142

Hi Jaqory, I bought a quality model of the DeTomaso and shared it with Paul, but I do not know if he yet found the time to work on it. I would be willing to share the model if somebody would like to use it as a base to work on the beautiful BPR DeTomaso.

 

[Cote Dazur]

and also who needs them ?

agreed, not sure who needs them, but as you showed some pics in the other thread, some of them were models that I liked for one reason or an other and I always thought that it would be nice if they would be available.

Lancia D24 Sports 1953

This is a nice addition, looks great and drive as expected once the FFB is tone down. The AI cannot drive that car, I tried a race on 2 different track and half of the field cannot even complete one lap and the complete field fail more than 2 laps.

 

[Velo2023]

It's beautiful..... one of my favourite cars ever - thanks Paul, you continue to exhibit your excellent taste in vintage cars!

The model is 800k so good to know Paul is working on LoDs. Also, object count is good and the actual car body is very well made/optimised. For example, the main exterior of the car is about 40k polys, but this Pininfarina badge is 62k.


View attachment 1382274


Some relatively 'easy wins' Paul if you're reading, or if anyone's willing to contribute.

• Exhaust - 15k
• Tyres - 4x40k = 160k
• Painted clips - 40k
• Unpainted boot clips - 10k
• Lancia badge - 40k

I have made LODs for the car. The car has been updated and is available on my website. The exhaust cannot be reduced in polys in LOD A because as with the tyres it fragments very easily. I will make a new exhaust over the next few days. The tyres have replaced from a Kunos car.

 

[Chokoretto]

Ar u guys have Any information about "lexus is350 gt300 models?

 

[Kwara]

Because EASY exists lmao (and also who needs them ? I just did it to see if I could, I can so I stopped)

A portion of those... Others I don't know where I put 'em, maybe they were deleted.
View attachment 1382329

Dude, a gift for us mod car junkies?

 

[Jezza819]

If you want to stay in car while pitting, you have to enable "stay in car" in "Settings\Assetto corsa\system\pits menu"

No I haven't attempted a pit stop yet. This was before the race. I was trying to figure out how to choose the steering wheel design while sitting in the car so I could toggle though the choices and see which one I want.

 

[Masscot]

Last fictional jobbie for the Calibra.

 

[Moor1804]

Hi everyone, I remember that a few months ago someone was updating the entire Gt4 package with Guerrilla. Does anyone have any more news on the progress? Thanks in advance

 

[Warwolf156]

Last fictional jobbie for the Calibra.

View attachment 1382360

Thanks a lot they are amazing

 

[Masscot]

Thanks a lot they are amazing

Not sure about that, but thanks anyway. Just some quick variety for the grid.
Hopefully some official replicas are in the works somewhere. The '96 car has some really nice ones.

 

[Warwolf156]

Not sure about that, but thanks anyway. Just some quick variety for the grid.
Hopefully some official replicas are in the works somewhere. The '96 car has some really nice ones.

I think they are great haha, I couldn't do it so for me they are great

The '96 car is great in all aspects to me, and it is still missing some official liveries as well

 

[Juim1j]

Join me in Minessetto Corsa brothers.

KB3K__Minesetto_Corsa_2

Yall have been waiting for this for a few months and it's finally here. This map was hell. Every time I went to modify or fix something, something else would break and the whole experience was just a nightmare. Point is that it's done, there are...

www.overtake.gg

 

[Rodger Davies]

I have made LODs for the car. The car has been updated and is available on my website. The exhaust cannot be reduced in polys in LOD A because as with the tyres it fragments very easily. I will make a new exhaust over the next few days. The tyres have replaced from a Kunos car.

Nice one, thank you!

 

[marc magnela]

I have made LODs for the car. The car has been updated and is available on my website. The exhaust cannot be reduced in polys in LOD A because as with the tyres it fragments very easily. I will make a new exhaust over the next few days. The tyres have replaced from a Kunos car.

no textures in lods, loaded from LOD A
and there are far too many polygons on the LODs

 

[J2116]

Trying to make the Nissan R33 JGTC 1998 [FM8] easy to be painted with a "normal" AO map
if someone has already started to mod this car or has better knowledge and wants to work together, send me a massage
I don't have good skills with 3d models or FM8 cars
View attachment 1382327

What kind of help did you need with 3ds max? I'm pretty familiar with that program

 

[Velo2023]

no textures in lods, loaded from LOD A
and there are far too many polygons on the LODs

The car now works for me (version 1.2). Perhaps you could download the car from ACTK. The LOD's are less heavy on Poly's than my version. The new version is available on the website as of about eight minutes ago. It includes other corrections with the AI.

 

[Greg_ST]

What kind of help did you need with 3ds max? I'm pretty familiar with that program

Someone else has taken this job
I will tell you If need your help
thank you

 

[Alguecool]

Hello!

As some of you may already know, Pasta2000 and Myself are in the work to bring the Datsun Fairlady 2000 into our beloved sim. The goal is to create 3 differents versions of the "same" car, depending on the race period, very much japanese. We will have a stock cabriolet one, a first generation racing from 1967-68 and a second generation racing from 1969-1970. Project is well underway, 3D modelling is very close to an end now, so we can hope for a release in a few weeks, maybe a month, we'll see.

On another note, this is also in the work (actually, was, before Pasta came along changing all my plans) :
Frazer-Nash coupe Le Mans 1953, with the goal of bringing it along with her main rival, the Bristol 450, as a package of 2 different cars from the same period correct race (Le Mans, you guest it)

That's it, just a bit of an update

See ya soon!

 

[jaqory]

Are you able to share the De Tomaso and let us know where you got it?

Not yet, I need to confirm a few things before I do just that.

Where did you get that mod? I've been looking for it for a long time too.

Claudio made and released this back in mid 2023 on his patreon until he took it down for some reason. He even made more cars and I already know that people gonna say delete them because of their bad quality. But until I see better models, these are staying in my garage.

And I believe he had some kind of Firebird Trans Am GT car in the works too and it looked like this:

He also have others like these and some that haven't been released yet:

Hi Jaqory, I bought a quality model of the DeTomaso and shared it with Paul, but I do not know if he yet found the time to work on it. I would be willing to share the model if somebody would like to use it as a base to work on the beautiful BPR DeTomaso.

Oh ok that's very nice to hear. I hope Velo can work on it soon. Can wait to see a better model of the Pantera GT1.