Assetto Corsa PC Mods General DiscussionPC

[GT3Masters97]

Logbook - I've lost count of how many I've done.

The z3 is almost finished, I just have to do some fixes, finish the sound and do some km on the track to see if everything is ok (hoping that the summer heat decreases a bit). Unfortunately, I had to put aside the idea of doing everything on a single model due to several problems, including the shadows that disappear when I perform the rim swap via ext_config. They are not exactly the same, the aerodynamics and power change slightly between the two versions. I think I can finish everything by mid-September, I want to check and try everything calmly, balancing it compared to other cars.

The other thing I had to give up on are the tyres: I'm not good at making them from scratch. I kindly asked for some tires from a team that runs an MC12 GT1. I interpreted their silence as a "yes" 🙄 😂

 

[Alguecool]

Logbook - I've lost count of how many I've done.

The z3 is almost finished, I just have to do some fixes, finish the sound and do some km on the track to see if everything is ok (hoping that the summer heat decreases a bit). Unfortunately, I had to put aside the idea of doing everything on a single model due to several problems, including the shadows that disappear when I perform the rim swap via ext_config. They are not exactly the same, the aerodynamics and power change slightly between the two versions. I think I can finish everything by mid-September, I want to check and try everything calmly, balancing it compared to other cars.

The other thing I had to give up on are the tyres: I'm not good at making them from scratch. I kindly asked for some tires from a team that runs an MC12 GT1. I interpreted their silence as a "yes" 🙄 😂

You mean the modelling or the physics ? Because first one is probably one of the easiest part to do on a car model, in my opinion, so I would be kind of surprise with what you already can do

If it's about physics, well hum... I'm not convinced I should be the one giving any advice on it

 

[GT3Masters97]

You mean the modelling or the physics ? Because first one is probably one of the easiest part to do on a car model, in my opinion, so I would be kind of surprise with what you already can do

If it's about physics, well hum... I'm not convinced I should be the one giving any advice on it

I would like it to be adequate in terms of performance compared to other FIA GT cars. The z3, at least on GTR2, is a bit of a water heater, but I would still like to ensure that it is neither too much like a shopping cart nor as fast as a 575 (at the beginning she was even faster LOL)

 

[Tetri]

You mean the modelling or the physics ? Because first one is probably one of the easiest part to do on a car model, in my opinion, so I would be kind of surprise with what you already can do

If it's about physics, well hum... I'm not convinced I should be the one giving any advice on it

Do you mean your P70 i've spent hours driving, that i believe turned me into an actual racer and that i was going to base my next grocery shopping trip on is a lie?

 

[spagna]

Help who knows! On some tracks, the display screen looks very light. Is there a general setting for all tracks or is it necessary to adjust the brightness of the displays in each track? CSP 0.2.5 - 1.

 

[sDmD13]

is there to sort skins alphabetically inside cntent manager?

 

[RicME85]

is there to sort skins alphabetically inside cntent manager?

Settings -> Content manager -> Content -> Car Skins -> Sort by

 

[JK1977]

lets drive classic

 

[Fanapryde]

Help who knows! On some tracks, the display screen looks very light. Is there a general setting for all tracks or is it necessary to adjust the brightness of the displays in each track? CSP 0.2.5 - 1.
View attachment 1383187

Are you using SOL or PURE ?
Because both need a different brightness setting in the ext_config.ini.
@shi offers two configs in his tracks, one for Sol, one for Pure.
But you can look in the config for Jumbotron settings and experiment with brightness, e.g.:

 

[Alguecool]

Do you mean your P70 i've spent hours driving, that i believe turned me into an actual racer and that i was going to base my next grocery shopping trip on is a lie?

Not a lie if you can't prove it's not the truth

 

[Peugeot905]

Early stages to be added to the WR LMP MegaPack. 2003 WR LMP-02 Peugeot N/A Chassis: #2003-01

 

[Twisteddrift]

Probably hidden system folder. You can type %appdata% in the address field in file explorer. It will take you to AppData\Roaming, so you'll have to navigate up to find AppData\Local, but it's an easy starting point.

Still couldn't find it. Anything else?

 

[Rui n]

Still couldn't find it. Anything else?

del.

 

[24H]

Work in progress livery

 

[BruceD]

Still couldn't find it. Anything else?

In Windows Explorer, go to the View tab at the top, find the box for View Hidden Files and Folders, make sure it's ticked, then you should be able to see the app data folder.

 

[Twisteddrift]

In Windows Explorer, go to the View tab at the top, find the box for View Hidden Files and Folders, make sure it's ticked, then you should be able to see the app data folder.

I have done this, but unfortunately it still doesn't pop up. Thanks for the suggestions so far.

 

[RMi_wood]

I have done this, but unfortunately it still doesn't pop up. Thanks for the suggestions so far.

type this into your explorer and hit enter...

C:\Users\YOUR_USERNAME\AppData

replace "YOUR_USERNAME" with your actual user name

(you are welcome)

 

[mrhenkz]

I have done this, but unfortunately it still doesn't pop up. Thanks for the suggestions so far.

 

[Twisteddrift]

did all of those things and still nothing.

 

[Pfalzdriver]

If you type %appdata% in the adress line of windows explorer and nothing comes up, there is something completely wrong with your windows.

Even if the folder is hidden it has to be present and it can be access with this!

 

[BruceD]

did all of those things and still nothing.

How many user names do you have under Users? Have you tried looking under another one? Sometimes its not always the obvious choice.

 

[mrhenkz]

did all of those things and still nothing.

go to the root of C: and type "AcTools Content Manager" in search bar in the top right corner, it has to exist so it will find it

 

[Masscot]

Updated.
Thanks Masscot for noticed an issue.

Corrected cam_facing.ini, surfaces.ini

Despite the update I still get the lap invalidated at this point on the Hairpin Fast layout.

 

[LaChub]

Despite the update I still get the lap invalidated at this point on the Hairpin Fast layout.

View attachment 1383338

surfaces.ini for Hairpin Fast layout
thank you.

 

[Perico Lospa]

Not a lie if you can't prove it's not the truth

"...They are not lies, they are changes of opinion...", as a relevant Spanish "canny" said... 🙄

 

[Masscot]

surfaces.ini for Hairpin Fast layout
thank you.

Fix confirmed - thanks for the quick reply.

 

[Twisteddrift]

All good. Thanks for everyone's help. sorry about the fuss.

 

[Pez94]

So, here it goes nothing.

I love obscure racing series, cars that make no one say "yes, I would surely like to compete in one of these", and deep inside we know tin tops are the best; also, I'm quite patriotic.

The long dead V8 Superstars/Euro V8 serie touches all of the points above.

Some already know there were a couple of games covering this series, from which the 3D files and yesterday I've managed to cram this barge into AC. Still, sounds are temporary stolen from the E92 GT2, physics are all over the place, nulls are wrong, materials have random values because I wanted to see this E60 in AC and give me some motivation.

Unfortunately modding isn't really my thing: I can skin and fix some problem physis wise, but 3D modelling is my enemy and I've never even dig into sound.

But I've found almost all of the homologation sheets of the entire field, I have a lot of photos/magazines/media in general to obtain the needed reference and I think I can manage to track down some cars and some drivers, if needed; testing the mod isn't a problem because at work I have very high end motion syms (remember the Pagani Huayra R Simulator? That one, but with a less fancy body).

The idea was to use the old 3D model as a base/template and in a latter stage switch to newer base car (e.g GT/Forza/CSR/whatever derived), redoing all of the various racing parts one piece at the time.

I don't want to release the car if the 3D remains the old since there are already too many lower quality mods around, same goes for the physics.

I'm not promising anything, for now this is just for personal use until it will reach an acceptable quality state.

I know somebody already converted this car, but I don't think is still active here to this day (?)

 

[BruceD]

So, here it goes nothing.

I love obscure racing series, cars that make no one say "yes, I would surely like to compete in one of these", and deep inside we know tin tops are the best; also, I'm quite patriotic.

The long dead V8 Superstars/Euro V8 serie touches of the points above.

Some already know there were a couple of games covering this series, from which the 3D files and yesterday I've managed to cram this barge into AC. Still, sounds are temporary stolen from the E92 GT2, physics are all over the place, nulls are wrong, materials have random values because I wanted to see this E60 in AC and give me some motivation.

Unfortunately modding isn't really my thing: I can skin and fix some problem physis wise, but 3D modelling is my enemy and I've never even dig into sound.

But I've found almost all of the homologation sheets of the entire field, I have a lot of photos/magazines/media in general to obtain the needed reference and I think I can manage to track down some cars and some drivers, if needed; testing the mod isn't a problem because at work I have very high end motion syms (remember the Pagani Huayra R Simulator? That one, but with a less fancy body).

The idea was to use the old 3D model as a base/template and in a latter stage switch to newer base car (e.g GT/Forza/CSR/whatever derived), redoing all of the various racing parts one piece at the time.

I don't want to release the car if the 3D remains the old since there are already too many lower quality mods around, same goes for the pysics.

I'm not promising anything, for now this is just for personal use until will be in an acceptable quality state.

I know somebody already converted this car, but I don't think is still active here to this day (?)

This series definitely needs to be in another game like AC.

For sounds if you can extract them from an original game its not hard to use FMOD to convert them to AC. There was an official game for this series, which I see is available on abandonware, might be worth hacking them from there.

As for models being done in high quality, something that has crossed my mind is the Blender retopology method, where you remodel over an existing model, but whereas the general Blender usage is to reduce the number of polys used on a model, you could do it to increase the number of polys and would probably be a lot faster than modelling from scratch again.

Just my thoughts really.

 

[Paulo Ribeiro]

So, here it goes nothing.

I love obscure racing series, cars that make no one say "yes, I would surely like to compete in one of these", and deep inside we know tin tops are the best; also, I'm quite patriotic.

The long dead V8 Superstars/Euro V8 serie touches of the points above.

Some already know there were a couple of games covering this series, from which the 3D files and yesterday I've managed to cram this barge into AC. Still, sounds are temporary stolen from the E92 GT2, physics are all over the place, nulls are wrong, materials have random values because I wanted to see this E60 in AC and give me some motivation.

Unfortunately modding isn't really my thing: I can skin and fix some problem physis wise, but 3D modelling is my enemy and I've never even dig into sound.

But I've found almost all of the homologation sheets of the entire field, I have a lot of photos/magazines/media in general to obtain the needed reference and I think I can manage to track down some cars and some drivers, if needed; testing the mod isn't a problem because at work I have very high end motion syms (remember the Pagani Huayra R Simulator? That one, but with a less fancy body).

The idea was to use the old 3D model as a base/template and in a latter stage switch to newer base car (e.g GT/Forza/CSR/whatever derived), redoing all of the various racing parts one piece at the time.

I don't want to release the car if the 3D remains the old since there are already too many lower quality mods around, same goes for the pysics.

I'm not promising anything, for now this is just for personal use until will be in an acceptable quality state.

I know somebody already converted this car, but I don't think is still active here to this day (?)

I have in my garage 31 E60, some are diesel tho.
Let me know if you are interested and in what kind.