Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 154,774 comments
  • 48,694,888 views
In the track folder open models_zolder_1975.ini and delete:
...
[MODEL_1]
FILE=windmills.kn5
POSITION=0,0,0
ROTATION=0,0,0
...

It should hide the windmill...

That was the first thing I tried. :D

Didn't work for me.

8MNZ2Vm.png
 
Spa 1934, 1938 or 1966. For both 30’s Spa by exchanging the “modern” objects to objects from the 30’s as a start.
Zolder 1967 Could be a lot of work, as this is a @Gilles75 track.
Brno 1965 track is in a very rudimentary state, it’s only converted.
Carrieres de Beez the 60’s version from @Gilles75. Besides some improvements done by others still not great, but the track itself great circuit to drive.
Have you tried my update


Would have to update lighting and grass textures as this I did a while ago.

Just about every texture has been replaced

Zolder_1967_AC!.png
Zolder_1967_AC.jpg
Zolder_1967_AC_3.jpg
Zolder_1967_AC_6.jpg

Zolder_1967_AC_textures.jpg
 
Last edited:
Thanks guys. That was easy. How stupid of me.

I've already started redoing the 80s ads. Watched the 1984 F1 race and the main sponsors were Olivetti, Vespa, Marlboro, Rank Xerox, Pirelli, Magneti Marelli, etc. you know the usual.

I only managed to remove the texture from the solar panels. That is probably very stupid way of doing it though. I'm sure we'll find out better way.

uS5gJck.jpg


aBLNxh9.jpg


cDJ4LwK.jpg


Dk7KWY8.jpg


WrM2JNk.jpg


r8sig4Q.jpg


1wzAJiC.jpg


That building has tons of ads. Lots of work ahead. Gotta get rid of those balloons too. :D

OZaDqpI.jpg


0WP5xLe.jpg
 
Last edited:
Thanks guys. That was easy. How stupid of me.

I've already started redoing the 80s ads. Watched the 1984 F1 race and the main sponsors were Olivetti, Vespa, Marlboro, Rank Xerox, Pirelli, Magneti Marelli, etc. you know the usual.

I only managed to remove the texture from the solar panels. That is probably very stupid way of doing it though. I'm sure we'll find out better way.
ext_config.ini

[MESH_ADJUSTMENT_...]
ACTIVE=1
MESHES=THE_MESH_YOU_WANT_TO_HIDE
IS_RENDERABLE = 0
 
Have you tried my update


Would have to update lighting and grass textures as this I did a while ago.

Just about every texture has been replaced
Thanks now I remember, I did try it, but for some reason it was lost and still using the old Gilles75 conversion, could be my incomplete backup. Corrected in my original posting. Do try Beez from Gilles75, as this track is very unique but in a rudimentary conversion state.
 
Last edited:
I can send you the preset files.

Have always liked this preview settings, someone sent it to me a long time ago and honestly cannot remember.

Also use this for skin editing as colors in showroom and track look the same.

Hi Guys

I do have some unfinished track texture updates which I'm still working on.

Some of these tracks are just not ready and not to my liking before I can upload.

As with many other tracks, sometimes I just reset and start all over again.


I would like to know from the community if there is a track that you would like a complete texture update.

Am open to requests and looking for something new to work on.

No street circuits please, I like scenery, elavation, old or new tracks as long as they have flow and pleasing to the eye :)


The most requested track I will work on.

Please aslo provide a link to the track as I may not have the track.
Knockhill , Croft. :)
 
Thanks guys. That was easy. How stupid of me.

I've already started redoing the 80s ads. Watched the 1984 F1 race and the main sponsors were Olivetti, Vespa, Marlboro, Rank Xerox, Pirelli, Magneti Marelli, etc. you know the usual.

I only managed to remove the texture from the solar panels. That is probably very stupid way of doing it though. I'm sure we'll find out better way.

aBLNxh9.jpg


That building has tons of ads. Lots of work ahead. Gotta get rid of those balloons too. :D
Add this to the end of existing ext_config.ini, extract the skins.zip into track folder and enable the skin 1984, and you get rid of both, the windmills and the solar panels, as long the skin is enabled.
INI:
[INCLUDE: ../skins/default/ext_config.ini.dds]
ACTIVE = 1

@Vintagedriver: did you try my Beez conversion?
 

Attachments

Last edited:
I can send you the preset files.

Have always liked this preview settings, someone sent it to me a long time ago and honestly cannot remember.

Also use this for skin editing as colors in showroom and track look the same.

Hi Guys

I do have some unfinished track texture updates which I'm still working on.

Some of these tracks are just not ready and not to my liking before I can upload.

As with many other tracks, sometimes I just reset and start all over again.


I would like to know from the community if there is a track that you would like a complete texture update.

Am open to requests and looking for something new to work on.

No street circuits please, I like scenery, elavation, old or new tracks as long as they have flow and pleasing to the eye :)


The most requested track I will work on.

Please aslo provide a link to the track as I may not have the track.
cadwell park too
 
This actually has proper potential, replace some of the textures and rework the rest, new lighting and vegetation it would look like a brand new track.

Like this

Please provide a link for the latest version of this track


@pugsang and @CrisT86 Have already done a blinder for modern East London (Prince George) GP Circuit.


Prince George it's already reworked and updated by me and @pugsang

Perhaps @Rainmaker87 's 1965 Prince George circuit?

 
Last edited:
Hey Guys

Without me changing anything I now have a problem.

Was updating Zolder 1967 ext file with new lighting and grass fx, relaunched track and started getting errors.

My graphics look blury

Have no idea what the problem is.

Updated all my drivers.

Reinstalled Pure, CSP and CM

Reshade will not launch but gives me a error

Even if I delete reshade the graphics is still blurry.

It's like game is launching with wrong DX version or something, just doesn't look right


Just cannot play game like this or even consider updating tracks

Screen shots don't really show how it looks, game is proper blury, especially tree's

Screenshot (204).png


Screenshot_eatc_bmw_220i_grand_valley_speedway_ll_19-9-124-18-49-1.jpg
 
Last edited:
I've updated the Touring Car Legends Oily Smoke pack with a few more cars like the Healey, Hillman Imp, Ford Fairlane and tweaked the Jag Mk2 smoke location.

Also added a separate 289 Cobra and smoke for the Kunos Lamborghini Countach.

 
Thanks now I remember, I did try it, but for some reason it was lost and still using the old Gilles75 conversion, could be my incomplete backup. Corrected in my original posting. Do try Beez from Gilles75, as this track is very unique but in a rudimentary conversion state.
Why remake Gille's when Sliderman's version is miles better ???

 
you should be using Object Inspector and/or 3dsimed to find textures and meshes.
Can you help

 
Add this to the end of existing ext_config.ini, extract the skins.zip into track folder and enable the skin 1984, and you get rid of both, the windmills and the solar panels, as long the skin is enabled.
INI:
[INCLUDE: ../skins/default/ext_config.ini.dds]
ACTIVE = 1

@Vintagedriver: did you try my Beez conversion?
so this skin sis for rt zolder right?
 
Last edited:
you should be using Object Inspector and/or 3dsimed to find textures and meshes.

Thanks. I wasn't even aware of that object inspector. I'm not much of a modder. I'm only good with Photoshop. But that is great asset, thanks.

PS: Does anyone know whether those Zolder track factories were present in the eighties or not? Should I remove them from the 80's skins? Windmills and solar panels already removed thanks to great advice from the guys.

PS2: How about the gas station now? Managed to find a 80s gas pump from Google images.

muVMnPD.jpg


lELdl2C.jpg
 
Last edited:
Conversion/Rework

1994 BTCC Peugeot/Talbot Sport 405 #18 Patrick Watts

Not exact for a number of reasons out of my control but its close enough. Some stickers are guess work, not many

To install: choose what res you want and drag that content folder over to CM

if you want AO change the name of the main skin file to "405_BODY.DDS"

Picture is without AO

car: https://modsfire.com/d1vPhx1y6B5nQ22


If anyone is up for doing the Omega skin then be my guest i wont be touching it i think that skin belongs on the LHD version as its not a BTCC skin (i dont think anyway)

edit: yes the Omega skin is from the ITCC
if we just extract to the car folder......without renaming anything the car is white only. Or is it just me?
 
24H
if we just extract to the car folder......without renaming anything the car is white only. Or is it just me?
you have the same issue as @Ken134 i think.

just rename the main skin file to the correct name. I am skinning from easy's version not the one of patreon

i will write this in the uploads aswell seeing as a few people have said the same thing
 
Last edited:
you have the same issue as @Ken134 i think.

just rename the main skin file to the correct name. I am skinning from easy's version not the one of patreon

i will write this in the uploads aswell seeing as a few people have said the same thing
did you change anything else to the mod? or does the "easy version" already have the renamed body file?
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back