Assetto Corsa PC Mods General DiscussionPC

[racinjoe013]

Kind of a silly question. Does CSP or Sol or Pure have some built in feature for daylight savings time? And if so, can it be disabled?

Reason I ask is that there is a particular date and time of day I typically like to test some things with. Today I went to test something out and everything seemed brighter than normal and the shadows were in a different place than normal. For kicks, I reduced the time of day by one hour and everything looked like it usually does. So the only thing I could think of was the sun position was different because of DST. What didn't make sense was the the particular date I used would not be a part of daylight savings time so it shouldn't have been different.

If it's not that, then I have no idea what I did to make the lighting (sun position) and shadows one hour off from where it usually is.

 

[The Vampire]

Kind of a silly question. Does CSP or Sol or Pure have some built in feature for daylight savings time? And if so, can it be disabled?

Reason I ask is that there is a particular date and time of day I typically like to test some things with. Today I went to test something out and everything seemed brighter than normal and the shadows were in a different place than normal. For kicks, I reduced the time of day by one hour and everything looked like it usually does. So the only thing I could think of was the sun position was different because of DST. What didn't make sense was the the particular date I used would not be a part of daylight savings time so it shouldn't have been different.

If it's not that, then I have no idea what I did to make the lighting (sun position) and shadows one hour off from where it usually is. From what I can tell it only seems to happen in a replay. A live sessions seems to look normal.

For DST, you can set the time zone of the track in assettocorsa/extension/config/data_track_params.ini
Most tracks are already there, but could be your track is still missing in the list...

 

[Rainmaker87]

The new Sergio Loro is out!

Ona Speedway, a historic oval

Ona Speedway Oval

Ona SpeedwayLenght 0.438 MilesOna Speedway is an Auto racing oval short track venue located in Ona, West Virginia. Ona Speedway is known for being the only paved oval race track in West Virginia and hosting NASCAR Cup Series races in 1963, 1964, 1970, & 1971Special Thanks to Larry Tyler Ohr

f3classictracks.sellfy.store

 

[Natan5]

Here it is.https://mega.nz/file/7xoDzYwT#NfAa3lbTvm_X6aq8C5Bkhj3WKzY6_vAK3ne30wRSaW8
The renal kart made by Hipole Racing(https://www.hipole.com/):https://ww...22785622/?from=search&spm_id_from=333.337.0.0
View attachment 1401018

WOOOOOOOOOOOOOOW ! Thanks a lot mate .

 

[RMi_wood]

For DST, you can set the time zone of the track in assettocorsa/extension/config/data_track_params.ini
Most tracks are already there, but could be your track is still missing in the list...

Well, only needed if geo location is not set in CM (assettocorsa\content\tracks\track_name\ui\ui_track.json)

 

[The Vampire]

Well, only needed if geo location is not set in CM (assettocorsa\content\tracks\track_name\ui\ui_track.json)

Well, that's what I always thought. But there are still tracks that have a correct geolocation, but don't take dst into account.
Must be a CSP bug then...?

 

[Hugo Becerra]

Hello everyone, I have this issue with wipers being activated all the time, I cant find anywhere to deactivate them and I thought it might be a bug with CSP, but I updated and the problem is still there. Anybody knows of a fix for this ?

 

[Perico Lospa]

Buildings and walls that disappears, weird rain physics behaviours, missing car sounds, lights and wipers activated without a reason... I think I have found the PERFECT soundtrack for Assetto Corsa...

 

[racinjoe013]

For DST, you can set the time zone of the track in assettocorsa/extension/config/data_track_params.ini
Most tracks are already there, but could be your track is still missing in the list...

I understand that, but why all of a sudden is the sun position and subsequently the shadow positions on August 28 at Monza one hour different than what August 28th looked like a week ago. Not a question i'm expecting you to have an answer for. Just something strange that has popped up.

It could be some kind of CSP bug as you say. I'm just going to have to remember to set my time one hour earlier until DST is over in the spring and things go back to normal. Or just get used to the lighting difference and not worry about it.

 

[Kwara]

by popular demand, here is the working csp wipers configuration and the modified kn5 file of the Ferrari F430 Challenge 2006 by Creative 101, hoping that the author decides to add wipers, because my modification is at amateur level but I hope you like it ... do not ask me to improve it because at the moment I do not know how to do better:

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_...]
DEBUG = 0
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = Material #2665

[MESH_ADJUSTMENT_...]
MESHES = ext_wipers1_001, ext_wipers_003
MOVE_TO = modelRoot:y

[ANIMATED_WIPER_1]
DEBUG = 1
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = 'Material #2665'
GROUP_0 = 'ext_wipers_003@A=*'
GROUP_0_ANGLE_FROM = 1.4
GROUP_0_ANGLE_LUT_CUBIC = 1
GROUP_0_ANGLE_TO = 73.5
GROUP_0_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.70822144, 0.82027435, 0.6987915
GROUP_0_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_0_RUBBER_FROM = -0.2581787, 0.77049255, 0.9279785
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.041499995
GROUP_0_RUBBER_OFFSET_EXP = 3
GROUP_0_RUBBER_OFFSET_POS = 0
GROUP_0_RUBBER_TO = -0.7015991, 0.82466125, 0.67974854
GROUP_0_BASE_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_BASE_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_1 = 'ext_wipers1_001@A=*'
GROUP_1_ANGLE_FROM = 2.7
GROUP_1_ANGLE_TO = 100.5
GROUP_1_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_1_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_1_END = -0.1302185, 0.81851196, 1.0009766
GROUP_1_PIVOT = 0.35379028, 0.5318651, 0.8399048
GROUP_1_RUBBER_FROM = 0.31999144, 0.78859955, 0.9362848
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.0050999997
GROUP_1_RUBBER_OFFSET_EXP = 2.176
GROUP_1_RUBBER_TO = -0.22973633, 0.8086853, 0.9480896
GROUP_1_BASE_ANGLE_TO = 91.4
GROUP_1_BASE_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_BASE_PIVOT = 0.35379028, 0.5318651, 0.8399048



WIPERS = [WIPERS_TRACE_...]
SURFACE = Material #2665
WIPERS = ext_wipers1_001, ext_wipers_003

Link KN5 Mod :

Link KN5 AERO version :

 

[The Vampire]

I understand that, but why all of a sudden is the sun position and subsequently the shadow positions on August 28 at Monza one hour different than what August 28th looked like a week ago. Not a question i'm expecting you to have an answer for. Just something strange that has popped up.

It could be some kind of CSP bug as you say. I'm just going to have to remember to set my time one hour earlier until DST is over in the spring and things go back to normal. Or just get used to the lighting difference and not worry about it.

You're right, it doesn't switch back in August like it used to and just keeps DST.
So yet another bug... sigh

 

[Moor1804]

by popular demand, here is the working csp wipers configuration and the modified kn5 file of the Ferrari F430 Challenge 2006 by Creative 101, hoping that the author decides to add wipers, because my modification is at amateur level but I hope you like it ... do not ask me to improve it because at the moment I do not know how to do better:

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_...]
DEBUG = 0
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = Material #2665

[MESH_ADJUSTMENT_...]
MESHES = ext_wipers1_001, ext_wipers_003
MOVE_TO = modelRoot:y

[ANIMATED_WIPER_1]
DEBUG = 1
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = 'Material #2665'
GROUP_0 = 'ext_wipers_003@A=*'
GROUP_0_ANGLE_FROM = 1.4
GROUP_0_ANGLE_LUT_CUBIC = 1
GROUP_0_ANGLE_TO = 73.5
GROUP_0_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.70822144, 0.82027435, 0.6987915
GROUP_0_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_0_RUBBER_FROM = -0.2581787, 0.77049255, 0.9279785
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.041499995
GROUP_0_RUBBER_OFFSET_EXP = 3
GROUP_0_RUBBER_OFFSET_POS = 0
GROUP_0_RUBBER_TO = -0.7015991, 0.82466125, 0.67974854
GROUP_0_BASE_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_BASE_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_1 = 'ext_wipers1_001@A=*'
GROUP_1_ANGLE_FROM = 2.7
GROUP_1_ANGLE_TO = 100.5
GROUP_1_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_1_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_1_END = -0.1302185, 0.81851196, 1.0009766
GROUP_1_PIVOT = 0.35379028, 0.5318651, 0.8399048
GROUP_1_RUBBER_FROM = 0.31999144, 0.78859955, 0.9362848
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.0050999997
GROUP_1_RUBBER_OFFSET_EXP = 2.176
GROUP_1_RUBBER_TO = -0.22973633, 0.8086853, 0.9480896
GROUP_1_BASE_ANGLE_TO = 91.4
GROUP_1_BASE_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_BASE_PIVOT = 0.35379028, 0.5318651, 0.8399048



WIPERS = [WIPERS_TRACE_...]
SURFACE = Material #2665
WIPERS = ext_wipers1_001, ext_wipers_003

Link KN5 Mod :

Link KN5 AERO version :

Thanks a lot... The kn5 file is the air one for both links

 

[Kwara]

Thanks a lot... The kn5 file is the air one for both links

I corrected it, please try again

 

[FireBall_959]

Ignore

 

[racinjoe013]

You're right, it doesn't switch back in August like it used to and just keeps DST.
So yet another bug... sigh

I'm happy to know I wasn't seeing things. I seem to have problems sometimes that others don't. I was worried this was another one of those instances.

 

[Peter Boese]

Kind of a silly question. Does CSP or Sol or Pure have some built in feature for daylight savings time? And if so, can it be disabled?

Reason I ask is that there is a particular date and time of day I typically like to test some things with. Today I went to test something out and everything seemed brighter than normal and the shadows were in a different place than normal. For kicks, I reduced the time of day by one hour and everything looked like it usually does. So the only thing I could think of was the sun position was different because of DST. What didn't make sense was the the particular date I used would not be a part of daylight savings time so it shouldn't have been different.

If it's not that, then I have no idea what I did to make the lighting (sun position) and shadows one hour off from where it usually is.

There is a thing we can't fix in CSP. Its not possible to change the DST in replays. So you will always start with the DST of your PC.
Maybe deactivate the real trajectory then or maybe use 2 replay, one recorded with DST and one without...

 

[LaChub]

Hello society.
Please tell me how to open the tracks of Grid Legends in 3DsimED32c?
I tried but it opens a blank tab.
Thank you.

 

[BruceD]

Hello society.
Please tell me how to open the tracks of Grid Legends in 3DsimED32c?
I tried but it opens a blank tab.
Thank you.

I don't know Grid Legend track formats, but usually if the file is opening blank then another file needs to be extracted first into the same folder. Look at the file sizes and see if there is a file that can be extracted by 3dsimed.

 

[24H]

do you use any excel sheet for championship standings? maybe someone got a good one

 

[BruceD]

do you use any excel sheet for championship standings? maybe someone got a good one

Can't for the life of me remember where I got this from but this one is pretty cool, even lets you do drop-scores. Apologies if the author is on these forums. Works fine in Google Sheets as well.

 

[peppemuratore]

by popular demand, here is the working csp wipers configuration and the modified kn5 file of the Ferrari F430 Challenge 2006 by Creative 101, hoping that the author decides to add wipers, because my modification is at amateur level but I hope you like it ... do not ask me to improve it because at the moment I do not know how to do better:

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_...]
DEBUG = 0
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = Material #2665

[MESH_ADJUSTMENT_...]
MESHES = ext_wipers1_001, ext_wipers_003
MOVE_TO = modelRoot:y

[ANIMATED_WIPER_1]
DEBUG = 1
MESHES = ext_wipers1_001, ext_wipers_003
UNDERLYING_SURFACE = 'Material #2665'
GROUP_0 = 'ext_wipers_003@A=*'
GROUP_0_ANGLE_FROM = 1.4
GROUP_0_ANGLE_LUT_CUBIC = 1
GROUP_0_ANGLE_TO = 73.5
GROUP_0_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_0_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_0_END = -0.70822144, 0.82027435, 0.6987915
GROUP_0_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_0_RUBBER_FROM = -0.2581787, 0.77049255, 0.9279785
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.041499995
GROUP_0_RUBBER_OFFSET_EXP = 3
GROUP_0_RUBBER_OFFSET_POS = 0
GROUP_0_RUBBER_TO = -0.7015991, 0.82466125, 0.67974854
GROUP_0_BASE_AXIS = -0.04067488, 0.7368261, 0.67485774
GROUP_0_BASE_PIVOT = -0.09631729, 0.36655712, 0.8550415
GROUP_1 = 'ext_wipers1_001@A=*'
GROUP_1_ANGLE_FROM = 2.7
GROUP_1_ANGLE_TO = 100.5
GROUP_1_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_AXIS_OFFSET_0 = 0, 0.70710677, 0.70710677
GROUP_1_AXIS_OFFSET_1 = 0, 0.70710677, 0.70710677
GROUP_1_END = -0.1302185, 0.81851196, 1.0009766
GROUP_1_PIVOT = 0.35379028, 0.5318651, 0.8399048
GROUP_1_RUBBER_FROM = 0.31999144, 0.78859955, 0.9362848
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.0050999997
GROUP_1_RUBBER_OFFSET_EXP = 2.176
GROUP_1_RUBBER_TO = -0.22973633, 0.8086853, 0.9480896
GROUP_1_BASE_ANGLE_TO = 91.4
GROUP_1_BASE_AXIS = 0.09419986, 0.8607814, 0.50018185
GROUP_1_BASE_PIVOT = 0.35379028, 0.5318651, 0.8399048



WIPERS = [WIPERS_TRACE_...]
SURFACE = Material #2665
WIPERS = ext_wipers1_001, ext_wipers_003

Link KN5 Mod :

Link KN5 AERO version :

Big thanks! But I think I did something wrong... I added the configuration to the end of the extconfig file and overwrote the kn5...

PS. Sorry but I can't understand why it doesn't show directly here... thanks for the help

 

[Kwara]

Big thanks! But I think I did something wrong... I added the configuration to the end of the extconfig file and overwrote the kn5...

PS. Sorry but I can't understand why it doesn't show directly here... thanks for the help

turn off automatic translation of the web page and copy the text of the csp formula

 

[noroardanto]

Can u please help me fix 2 cars?

https://www.dropbox.com/scl/fi/uruk...ey=4aajpdfv0t6bz8cqnpxhoftsq&st=cic4ld1y&dl=0

Sound not working

Please replace the GUIDs.txt in the sfx folder with this one

 

[RicME85]

do you use any excel sheet for championship standings? maybe someone got a good one

Not an Excel sheet but an app - https://www.overtake.gg/downloads/ac-simple-championship-tracker.70445/updates

 

[Apocalypse211]

do you use any excel sheet for championship standings? maybe someone got a good one

Do you guys use this one? You get practice, qualifying and race results from every race. I use this all the time to archive my championships. Amazing site.

Simresults - rFactor, Assetto Corsa and Project Cars results log viewer, parser, converter, analyzer and reader

The results viewer for your favorite race sims. This website allows you to upload and view your log files in a readable format. The results will be saved and public, so you can share them with your fellow racers.

simresults.net

Go to Content Manager -> results, open the folder and copy and paste the js file to that site. With one click you have perfect sheets like this.

 

[Fall Guy]

Fenryr released Snetterton, I think it´s another ACC convert.

https://www.patreon.com/posts/snetterton-0-8-114825540

Did not try it yet but looks quite decent. Any opinions?

 

[Paulo Ribeiro]

Paul sorry if already been posted.

• Check the quarantine folder of your virus scan, my virus scan btw did break CM-AC.
• Try to disable every mod, app, PP, Pure or whatever, check the CM inbuilt MOD switcher.
• Do the https://help.steampowered.com/en/faqs/view/0C48-FCBD-DA71-93EB
• Reset the whole CM back to stock.
• If not I’m afraid, it will be a complete reinstall.

One stupid question @Paulo Ribeiro. Did you check IF ASSETTO CORSA IS INSTALLED IN STEAM? Few years ago, for no reason (like happened to you) AC was always saing me RACE CANCELLED everytime i launched a test or race.

I found that ASSETTO CORSA WAS NOT INSTALLED in Steam (never understood what happened since it seems that AC was uninstalled without removing the files).

Once found that, i reinstalled AC (by changing the name of the original folder in order to keep tracks and cars) and then moved them to the new installation and everything start works fine again.

Try this, and make sure that you back up your wheel or controller settings and chase cam views.

Delete Assetto Corsa folder in my Documents

Delete Content Manager in game root folder

Delete AcTools Content Manager folder in your users/.../appdata/local/

Uninstall Pure or Sol completely

Uninstall CSP completely

Restart your system and launch Assetto without CM.

Install CSP and CM

Install Sol/Pure etc.

This should completely reset your game and run like a dream.

You will have to apply your own graphic settings and CM settings as per your liking and system

Thank you all for the tips and help.
Unfortunately, the issue remains.

I guess that I might have to make a clean installation.
With almost 2600 tracks and 13500 cars, not to mention all the APPS and so, the task will be hard for sure.
That is why I have been away from AC.

Will update news, if it will be any.


Now, can any of you help me find what this sticker says?

Cheers

 

[RMi_wood]

Hello society.
Please tell me how to open the tracks of Grid Legends in 3DsimED32c?
I tried but it opens a blank tab.
Thank you.

cannot, only cars

 

[Fanapryde]

Fenryr released Snetterton, I think it´s another ACC convert.

https://www.patreon.com/posts/snetterton-0-8-114825540

Did not try it yet but looks quite decent. Any opinions?

Can’t even drive the 200 layout (ai spline broken).
The 300 layout works but is nowhere near the visual quality of my good old version!

Edit: I should add it's the snetterton v1.2 by Reboot Team, Sliderman and gunnar333 I was comparing with.
Thanks to the tip from @samdale12 I was able to try the 200 layout too.

 

[Fall Guy]

Can’t even drive the 200 layout (ai spline broken).
The 300 layout works but is nowhere near the quality of my good old version!

Hm, so the RT version is still better? A bummer. Will give it a try for comparison.