Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 157,268 comments
  • 51,149,410 views
jac0
______________________________________________
@shi
Something entirely unrelated, ( I would like to put this in a separate post ,but that's against the rules)
How to fix the position of a floating groove?
View attachment 1474410View attachment 1474409
would this be feasible for me to change with code in extension\ext_config.ini or would it take some work in Blender (then I can't do this myself unfortunately)
Since Bikernieki High Speed is my #1 go-to track for testing cars, I would love to see those grooves fixed (they are all floating above the tarmac now... :bowdown:
Click to expand...
3D work in Blender is required.
Use the Shrinkwrap Modifier.
StoffelWaffle
How did you extract and make the trees work ? I've tried to bring trees to Korea from the RF2 mod (which is based on the same F1 201x source) but as soon as I change the shader they just disappear lol
Click to expand...
In the case of rF2 flat trees
You can extract them by exporting them as FBX from 3Dsimed.
Import them into Blender and make them X-shaped.
 
sab001
Also a Question For Peter: Would it be possible for a 1-button <save-both-Pure-Config-track-specific-AND-Pure-PP-settings> together? I end up having to change the PP settings at almost every track due to over-saturation and brightness issues. A button to save Pure PP settings by track alone (or give-it-a-name-or-directory) would be good too... (I only use the Pure PP filter, it seems to do it all.)
Click to expand...
But this makes no sense. It is intended that those things are separated!
Why should it be a good way that you change pp settings for every track? Then something is really problematic with your used PP!

What is the problem if you use the „pure“ filter? Could you show an example why you change something there?
 
Last edited:
shi
3D work in Blender is required.
Use the Shrinkwrap Modifier.

In the case of rF2 flat trees
You can extract them by exporting them as FBX from 3Dsimed.
Import them into Blender and make them X-shaped.
Click to expand...
Please, not X-shaped.
Y-shaped is much much better.
And non-mirrored!
:)
 
Rainmaker87
You will now have the chance to test a car done by all of the big three, URD, VRC and RSS.

www.virtual-racing-cars.com

AC | Prototype H - Cadenza V

Description The Cadenza V is a hybrid prototype designed for endurance racing in the ProtoH class, built to combine power, efficiency, and reliability over long-distance competitions. The car features a 5.5L naturally aspirated V8, delivering a maximum output of 500 kW (670 hp) to the rear
www.virtual-racing-cars.com www.virtual-racing-cars.com
unitedracingdesign.sellfy.store

AC Dallas VSR Hybrid

Presenting the Dallas VSR Hybrid Hypercar!!Our latest effort in digitizing racecars includes high amount of features powered by Custom Shaders Patch.List of features includes: Hybrid system within current regulations, advanced electronic systems like TC1/TC2 and more, additional features for brakes,
unitedracingdesign.sellfy.store
Click to expand...

And it still comes up short compared to S397's car 🤫

Wish the 'Big three' would concentrate on something else.
 
Masscot
Peter, is there any chance you could have the default chance of rain set at 0% for any dry weathers?
It's annoying when you're using, say, Windy weather and then your screen suddenly freezes for a second and the framerate subsequently tanks just because a single drop or rain has fallen somewhere on the circuit.
If people want to ADD a chance of rain with dry weathers then fine, but having it as the defaults doesn't really make sense until Ilja fixes the framerate issues that one drop of rain can cause (it never used to be like this) plus the fact that one drop of rain can turn the circuit into an undriveable ice rink.
Might tiny drops of rain (even if you don't notice them actually falling) be also be contributing to these micro stutters?
I keep changing chance of rain to zero in dry weathers but it either doesn't save properly or gets reset when Pure is updated. We're told to reset to defaults with every update, aren't we?
Please at least consider it. As soon as any form of wet weather kicks in our PCs just shrug their shoulders and jump out of the nearest window.
Click to expand...
The defaults in Pure Planner are already 0.0

1756103758271.webp


And i have no weather-presets file in the archive, so it should start with those on 0.
What do you see if you install Pure?
Do you have a weather presets file in your Pure custom settings folder?

1756104011679.webp

and then it should be 0 at the dry weather....
 
Does anyone know if there is a way to make a setup the default for a car? I can see where you can change the wing angles in setup.ini, but not things like springs and dampers, just the range that they work on. Is there any way of setting that in the setup.ini file or not?
 
Last edited:
BruceD
Does anyone know if there is a way to make a setup the default for a car? I can see where you can change the wing angles in setup.ini, but not things like springs and dampers, just the range that they work on. Is there any way of setting that in the setup.ini file or not?
Click to expand...
That would be in suspension.ini, setups.ini being to adjust once in pit
 
Peter Boese
The defaults in Pure Planner are already 0.0

View attachment 1474611

And i have no weather-presets file in the archive, so it should start with those on 0.
What do you see if you install Pure?
Do you have a weather presets file in your Pure custom settings folder?

View attachment 1474612
and then it should be 0 at the dry weather....
Click to expand...
Ah, now I'm at my PC (was on the phone earlier and couldn't really read the table) I see that the default 'Windy' weather (which is the one I use most, and considered a 'dry' weather) DOES have a chance of rain. That's the one that's been causing the hiccups.
Question: if I edit the 'Windy' data in the Pure planner to remove rain probability completely, and hit the general Pure 'save' button, will that get saved no matter if Pure gets updated and/or 'reset to defaults' is clicked (which you always recommend when updating)?

One other suggestion for you to consider: have wind DIRECTION randomised by default for any weathers that use wind, so that flags etc will be blowing in a randomly different direction when starting a new session at a particular track. It just adds a nice variation rather than always seeing them blowing the same way. Any reason why wind direction is currently always the same by default?

Thanks.
 
Last edited:
BruceD
Does anyone know if there is a way to make a setup the default for a car? I can see where you can change the wing angles in setup.ini, but not things like springs and dampers, just the range that they work on. Is there any way of setting that in the setup.ini file or not?
Click to expand...
This is two questions, disguised as one 😊
1. In setup.ini, almost any setup adjustments can be coded in, to offer these adjustments in-game before driving the car. Probably easiest to look at examples which DO offer those adjustments.
2. Saving that adjusted setup, I've seem people say it's possible to save it with a specific name to make it the default. I've seen it referenced in this forum, but can't remember exactly what it is, most likely "default" :lol: or somesuch.

PS. Not at my gaming PC rn, else I'd post examples. Sorry.
 
Last edited:
andrevr
This is two questions, disguised as one 😊
1. In setup.ini, almost any setup adjustments can be coded in, to offer these adjustments in-game before driving the car. Probably easiest to look at examples which DO offer those adjustments.
2. Saving that adjusted setup, I've seem people say it's possible to save it with a specific name to make it the default. I've seen it referenced in this forum, but can't remember exactly what it is, most likely "default" :lol: or somesuch.

PS. Not at my gaming PC rn, else I'd post examples. Sorry.
Click to expand...
For the 2nd point you are referring to Ai_default, where what I'm trying to do is have the default setup when you get in the car to be correct, without having to adjust it or load a setup. What Masterfocus suggested does work, its just things like damper settings that I need to sort out. Plus on oval cars the setup is asymmetrical and I can't figure that part out yet.

sab001
If you save a setup under the name "ai_default", the ai will use that setup. I've heard that it won't necessarily use the fuel settings...
Click to expand...
Correct, it calculates the fuel setting based on the fuels_cons.ini file seperately.
 
Last edited:
Rainmaker87
You will now have the chance to test a car done by all of the big three, URD, VRC and RSS.

www.virtual-racing-cars.com

AC | Prototype H - Cadenza V

Description The Cadenza V is a hybrid prototype designed for endurance racing in the ProtoH class, built to combine power, efficiency, and reliability over long-distance competitions. The car features a 5.5L naturally aspirated V8, delivering a maximum output of 500 kW (670 hp) to the rear
www.virtual-racing-cars.com www.virtual-racing-cars.com
unitedracingdesign.sellfy.store

AC Dallas VSR Hybrid

Presenting the Dallas VSR Hybrid Hypercar!!Our latest effort in digitizing racecars includes high amount of features powered by Custom Shaders Patch.List of features includes: Hybrid system within current regulations, advanced electronic systems like TC1/TC2 and more, additional features for brakes,
unitedracingdesign.sellfy.store
Click to expand...

I wonder why all three of them have yet to do an Acura?
 
Jezza819
I wonder why all three of them have yet to do an Acura?
Click to expand...
Well URD and RSS seem determined to step on eachother's toes as much as possible now so that just leaves VRC. Also being that the Acura doesn't run outside of IMSA, there is probably less interest for it globally. Still, glad to see RSS is doing a Lambo so at least that car won't be totally excluded from having a good mod like the Vanwall was. The ACF LMU port is nice but I wish somebody would do a data replacement for it like the ones that exist on Overtake for the Valkyrie and ARX-06.
 
Screenshot_urd_amr_egt_2019_sx_lemans_25-7-125-16-53-47.webp

Say bye-bye to two M8s inespicably pitting at the 4th lap all by themselves while the Pit App craps out on me (yeah csp version is the one mentioned in the app requirements).

Does the fuel consumption option in "quick drive" works on all cars? or just the player's one?
 
The server I regularly visit for sports car racing mod for Assetto Corsa, Tomsim, has shut down. Can anyone recommend other good discord servers for sports car racing mods? I mainly looking for GT3 race cars and hypercar/LMP1 mods. I also enjoy mods for older series like Group C
 
Gabriele
Sorry, I didn't read the whole thread, but did TomSin close his Discord channel? What happened?
Click to expand...
MrHunt

PC Post in thread 'Assetto Corsa PC Mods General Discussion'

quote from Tom (Tomsim)

"Tom — 17:45
From the last 2 years, I just made everything people wanted, uploaded mods asked, gave help, more than we should, I just asked for one thing : Support. During 2 years, the only thing I could read is : oh, do this, oh do that. We release a mod, « oh can you make another one ? »
This community is worse than any community existing in that world. Trust me the Woke community is more peaceful.
I lost my time explaining and helping anyone who asked. Some private mods, some private tracks…
First time with Max it was only a « let them talk », so we decided to...
 
ninezeroniner
View attachment 1474676
Say bye-bye to two M8s inespicably pitting at the 4th lap all by themselves while the Pit App craps out on me (yeah csp version is the one mentioned in the app requirements).

Does the fuel consumption option in "quick drive" works on all cars? or just the player's one?
Click to expand...
Just give up on Nuzzi's app until he gets in touch with Ilja.

It's what I did sometime late last year, and I've been happier for it. CSP is already a mess, and the Pit App just doesn't work consistently enough to be worth the trouble.
 
Mole Man.webp


So my question to all the track makers out there, or people with some experience. Why is it when I place a pitbox on a track my lollipop man thinks he's a mole and must hide underground? I've tried to raise the height of the pit dummy but that doesn't make any difference. What controls the height of this guy?
 
X90
Just give up on Nuzzi's app until he gets in touch with Ilja.

It's what I did sometime late last year, and I've been happier for it. CSP is already a mess, and the Pit App just doesn't work consistently enough to be worth the trouble.
Click to expand...
The Hotlapping Simulator (tm)




Another Totally Unrelated Thing (tm)
I love the GTP community work done on the Gen1 boat, The Bentley Continental.
Is there a chance to fix the weird z-fighting, Predatoresque effect that happens in the replays?
Not on all models, don't know if it's a LOD or the main kn5 but it's there.
Please, please, please.

Sci-Fi Hair Flip GIF
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
5K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
43 44 45
Replies
1K
Views
290K
Beezer215
Beezer215
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
249
Views
47K
MagpieRacer
MagpieRacer
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
21K
Cote Dazur
Cote Dazur
Back