Assetto Corsa PC Mods General DiscussionPC

[FrustratedUse]

Ok, That's everything posted in the GT Planet skins upload section archived, At least as of today.

This one was just agony and pain to go trough cause a lot of skins are just not properly labeled. Are these real? fictional? idk screw yourself find out yourself by sitting and googling for 10 minutes just to find nothing LOL!

Didn't bother adding some of the skins due to this, & NO. i will not go trough this forum section to find an livery to include in this spreadsheet. You'd have to be mentally not there to do that, I might not be mentally there. But i'm not that far gone. So if there are liveries posted on the forum section here, Then those are just not existing to my eyes unless i see them when they get posted while looking trough the forum.


What i mean by this is, For the love of GOD start using the download section when you upload cars & skins. No one wants to sit and go trough literal thousands of pages just to find a mod / skin.

Another skin archiving update. Have added... idk? 100+ liveries since last post (i think i'm starting to hallucinate)

idk if it's to much to ask but if anyone happens to have an Assetto Corsa Forums account that isn't banned (i'd be surprise if someone has one considering they are banning you for as much as breathing) to look trough it and see if there are any liveries on there that are real liveries and worth archiving. Since i can't do that. (Literally banned for just logging into the site lol)

Link to spreadsheet: Assetto Corsa Real Liveries Archive

 

[Rainmaker87]

UPDATE Indianapolis (damone13x) shader overhaul and night lights

v4.3
-added rain FX

Indianapolis (damone13x) shader overhaul and night lights v4.3 by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[Atticus]

Anyone else having this issue with MTS Fuji where the Shortcut layout is just... not working?

(It loads the chicane layout with the hardcoded barriers and cuts.)

EDIT: I'm using v1.1.3. Previous version (v1.1.2) has the same issue.

 

[ninezeroniner]

Hey there, I'm about to tweak sidelines of a track via AI Spline Editor.
I see there's no sideline save option so I assume it is going to bake it in the fastlane.ai, am I right or am I trippin'?

 

[Gabriele]

The problem is inside the Nuzzi app, 4.5 version. If you want to have correct pitstops at Monza 66, you have to change the code of Nuzzi app.

To do so, go to your assetto corsa folder -> apps -> lua -> Nuzzi_pits_app

in this last folder, you should have a file named : Nuzzis_Pit_App.lua

open it with a text editor, then you have to go to lines 412 and 427 .

for each of these lines, change

to



save the file (ctrl+S) and close the text editor.

Then go back to content manager and enable new AI behaviour.

If you start a race with Monza66 with csp0.2.12 preview and make AI pit at lap 1 with Nuzzi app: you should observe that the "go back to pit just after release" bug has disappeared. At least it worked with my setup.

But the hack is not generic, the 0.96 value is specific to Monza66 pit position and will most probably not work for every tracks that have this bug.

I think there is a way to generalize the solution, but the app is not open source

I'm going crazy with this problem, it's truly absurd. I've made changes to Nuzzi's "pit stop" app on the "Monza 88" track by Rainmaker, and everything seems to work if I run a simple race. But as soon as I use the track for a custom championship, the problem returns, that damned loop in the pits returns. What's the difference between a simple race and a championship?!?! Absurd...

 

[TURBOMATIZ]

Please notice that you MUST install everything that way:

Never use drag'n'drop! It will involve Windows Explorer then. That will include Windows Security tools like Windows Defender and smart screen.
Those will block script files if the think its a virus or something. But those tools are machine-learning and they often false flag things.

So please ONLY use 7zip app and its own Extract button and then you extract it directly into the AC root folder. For further help please use the Pure Discord!

Hi Peter I've installed pure as instructed and I'm still getting the issue . It appears to be a bit random . I can sometimes activate the pure script with the purepp app ingame and other times I need too leave the game and change the ppfilter then try changing the ppfilter with the purepp app ?

 

[Tetri]

Hey there, I'm about to tweak sidelines of a track via AI Spline Editor.
I see there's no sideline save option so I assume it is going to bake it in the fastlane.ai, am I right or am I trippin'?

Yup new format keep the sidelines in the payloads (vs old that used an external csv file). You' re good to go, will be saved with the fastlane.

Also, once done with the fastlane, i would delete the eventual r_side.csv and l_side.csv in the data folder as they could interfere.

Classic one, when you open the fastlane and out of nowhere the left sideline is gone.

 

[24H]

Another skin archiving update. Have added... idk? 100+ liveries since last post (i think i'm starting to hallucinate)

idk if it's to much to ask but if anyone happens to have an Assetto Corsa Forums account that isn't banned (i'd be surprise if someone has one considering they are banning you for as much as breathing) to look trough it and see if there are any liveries on there that are real liveries and worth archiving. Since i can't do that. (Literally banned for just logging into the site lol)

Link to spreadsheet: Assetto Corsa Real Liveries Archive

I do have an account will have a look into the forum

added a link to the 2016 GT Masters Grasser Lambos as a comment

 

[Apocalypse211]

BTW, not sure you've seen this one - https://www.overtake.gg/downloads/f1-1995-leaderboard.80333/

That's cool. Great that my TV graphics can be used elsewhere too. All 100% benefit for everyone. Well done.

 

[Masscot]

Updating/correcting my 5+ year-old adboard/texture skin for this track.
Has anyone done a good RainFX config for it?
edit: nvm, just found this: https://www.overtake.gg/downloads/aviano-circuit-enhanced-grass-fx-rain-fx-light-spectator.78727/

 

[GT3Masters97]

Is there a new version of the Monza circuit? The one with the revised first corner? 👀

 

[fto_10]

I'm going crazy with this problem, it's truly absurd. I've made changes to Nuzzi's "pit stop" app on the "Monza 88" track by Rainmaker, and everything seems to work if I run a simple race. But as soon as I use the track for a custom championship, the problem returns, that damned loop in the pits returns. What's the difference between a simple race and a championship?!?! Absurd...

You might need to deactivate nuzzi app from settings, CONTENT -> MISCELLANEOUS -> LUA APPS.There you will see the Nuzzis Pit App and once clicked it will have a button at the bottom to disable.otherwise the app will automatically disable itself for Quali & then enable itself for Race sessions on wkd or in a championship.

edit... just realize ancient_3 already suggest something similar ...

 

[BruceD]

You might need to deactivate nuzzi app from settings, CONTENT -> MISCELLANEOUS -> LUA APPS.There you will see the Nuzzis Pit App and once clicked it will have a button at the bottom to disable.otherwise the app will automatically disable itself for Quali & then enable itself for Race sessions on wkd or in a championship.

edit... just realize ancient_3 already suggest something similar ...

You can't just disable the app, you have to go into each track's data folder, into surface.ini and delete the last section that the app adds, otherwise the AI still pit all the time on that track.

 

[MrLonguinha17]

Competing in yet another category, this time in the cockpit of Brazilian driver Igor Omura Fraga with the "Formula Supreme = Super Formula Japan", race 2 in Suzuka.

Driving with Igor Fraga

 

[Peter Boese]

Hi Peter I've installed pure as instructed and I'm still getting the issue . It appears to be a bit random . I can sometimes activate the pure script with the purepp app ingame and other times I need too leave the game and change the ppfilter then try changing the ppfilter with the purepp app ?

Sorry i don't know what you mean. you don't change the ppfilter with the Pure PP app. It is just there to configure the running script which is loaded with the selected ppfilter.

So you change the ppfilter in the "photo mode" or the "post processing filter" app ingame or in the video settings. If you install Pure 3.01 hotfix it should all work again with every ppfilter in Pure LCS...

Do you use Microsoft OneDrive?

 

[shi]

Circuito San Juan Villicum v1.01

https://www.patreon.com/posts/circuito-san-121707749

View attachment 1427166
The Circuito San Juan Villicum is a motor sports racing circuit located in the San Juan Province of Argentina close to National Route 40. The circuit is anti-clockwise with a length of 4.276 km (2.657 mi). There are seven turns to the right and ten left. The undulating contours were artificially created by moving more than 700,000 cubic meters of earth. (wikipedia)
Conversion from rFactor.

-CSP recommended
-30 pit/start
-6 layouts
-AI, cam

NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.

Credits & Thanks;
Original rFactor Track by AR rFactor Tracks
-Thank you for giving me permission

AC converted by @shi (shin956)
Crowds texture by Kniker97
marshall and some textures by kunos

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Even when CSP settings → General Patch Settings → CPU optimizations → Chunks optimizations are set to Advanced, ground objects are no longer hidden. (Tested with CSP 0.2.12-preview1.)
Updated Shaders.
Updated ext_config.ini.

Circuito San Juan Villicum v1.01
The link is in the quote.

v1.01 changelog;
Even when CSP settings → General Patch Settings → CPU optimizations → Chunks optimizations are set to Advanced, ground objects are no longer hidden. (Tested with CSP 0.2.12-preview1.)
Updated Shaders.
Updated ext_config.ini.

 

[jac0]

<snip>



Look if there is a LOD section in the track extconfig.ini file.
Or disable TAA (Temporal anti-aliasing in settings /CSP/Extra FX

thanks for the suggestion, but there is no ext_config.ini in that track folder... could I add one and put some LOD commands in there to make it stick to high res longer? If I look into other tracks where the lines don't blur that quickly, I can't find any "LOD" in their ext_config files...

( and I do not have Extra FX enabled , running VR)

 

[24H]

anyone knows whether this track is available?

Edit: already found it....it´s Fuji Short Course

Fuji Speed way shortcourse

scratch track mod FSW SHORT Made by myself ・3DCG SCRATCH ・Partial assetto Corsa standard resource use ・I use some CSP FX

www.overtake.gg

 

[Gabriele]

You might need to deactivate nuzzi app from settings, CONTENT -> MISCELLANEOUS -> LUA APPS.There you will see the Nuzzis Pit App and once clicked it will have a button at the bottom to disable.otherwise the app will automatically disable itself for Quali & then enable itself for Race sessions on wkd or in a championship.

edit... just realize ancient_3 already suggest something similar ...

I need the app since I have to do a championship 😢 the problem seems to only occur on the Monza 88 circuit and only in the championship; I don't understand what the difference is between a simple race and a championship race? 😅

You can't just disable the app, you have to go into each track's data folder, into surface.ini and delete the last section that the app adds, otherwise the AI still pit all the time on that track.

I'm not a physics expert, so I usually don't edit files to avoid problems. Should I delete the last few lines of "surface.ini"? 😥

 

[ancient_3]

I'm going crazy with this problem, it's truly absurd. I've made changes to Nuzzi's "pit stop" app on the "Monza 88" track by Rainmaker, and everything seems to work if I run a simple race. But as soon as I use the track for a custom championship, the problem returns, that damned loop in the pits returns. What's the difference between a simple race and a championship?!?! Absurd...

Maybe there is some kind of different behavior according to the session in his app, I don't know...

I have started to work on a small AI app for myself (DumbAI, here at GTP: https://www.gtplanet.net/forum/downloads/dumbai.7322/), to tackle some issues I found annoying without having a more complexe third party paid app that has much more functionnalities.

First I'm finishing the blue flag behavior that was the most annoying thing for me, but then I'll add some pit stop behavior.

There is already in the app a first attempt that allows to change the tyre compound chosen when it stopped raining and the track has dried. Te original CSP behavior is to put only medium after the rain it seems, so now you can make the AI put soft or hard tyres .

Unfortunately, the app needs the last CSP 0.3.120 as the functionnality "pit when raining" was broken in the former CSP version.

But if you can tell me which kind of pitstop strategy you want to simulate , I can try to make it into my DumbAI in the next version. I don't want to recreate every app of Nuzzi but I'm surely interested in simulating variable pitstop strategies for my own championships.

 

[fto_10]

I need the app since I have to do a championship 😢 the problem seems to only occur on the Monza 88 circuit and only in the championship; I don't understand what the difference is between a simple race and a championship race? 😅

i think the different is ... spaghetti code

 

[BruceD]

I'm not a physics expert, so I usually don't edit files to avoid problems. Should I delete the last few lines of "surface.ini"? 😥

Yes most lines in there will be about surfaces, grip, effects, etc. Then right at the end will some random group of things, about 4 lines of stuff, that needs to be removed. You can open up a track you haven't used the app on and see what a normal file looks like.

 

[Atticus]

Anyone else having this issue with MTS Fuji where the Shortcut layout is just... not working?

(It loads the chicane layout with the hardcoded barriers and cuts.)

EDIT: I'm using v1.1.3. Previous version (v1.1.2) has the same issue.

Anyone?

 

[TURBOMATIZ]

Sorry i don't know what you mean. you don't change the ppfilter with the Pure PP app. It is just there to configure the running script which is loaded with the selected ppfilter.

So you change the ppfilter in the "photo mode" or the "post processing filter" app ingame or in the video settings. If you install Pure 3.01 hotfix it should all work again with every ppfilter in Pure LCS...

Do you use Microsoft OneDrive?

Sorry Peter the post processing filter app is where if the ppf filter hasn't loaded i go into and it says active pure script and it sometimes loads properly . I have updated too the latest pure hot fix. As far as onedrive I've never had this issue before the latest pure and csp ,has something changed?

 

[24H]

I am pretty sure that it was mentioned in that thread already some day........but why do all SLS skins have these tyres?
Anyone knows where the config is located?

 

[Greg_ST]

I am pretty sure that it was mentioned in that thread already some day........but why do all SLS skins have these tyres?
Anyone knows where the config is located?

View attachment 1488004

AS far as i know, the tyres (Pirelli) are texture and not a config file (txt)
You can change them from the car's skins folder
now, if the author uses another method for the tyres texture, i don't know
BTW, the front (EXT) banner is behind the glass(EXT)
But is this a mod or kunos car?

 

[The Vampire]

I am pretty sure that it was mentioned in that thread already some day........but why do all SLS skins have these tyres?
Anyone knows where the config is located?

View attachment 1488004

assettocorsa/extension/config/cars/common/gt3_tyres_kunos.ini
I just delete everything inside that .ini and save it.

 

[Peter Boese]

Sorry Peter the post processing filter app is where if the ppf filter hasn't loaded i go into and it says active pure script and it sometimes loads properly . I have updated too the latest pure hot fix. As far as onedrive I've never had this issue before the latest pure and csp ,has something changed?

Please continue this at Pure Patreon or Pure Discord Server. We must check things. It seems the hotfix is not properly set or there is a different issue...

 

[Gabriele]

Yes most lines in there will be about surfaces, grip, effects, etc. Then right at the end will some random group of things, about 4 lines of stuff, that needs to be removed. You can open up a track you haven't used the app on and see what a normal file looks like.

Thanks. But I would need the app for the championship...ugh 😩😓

 

[24H]

AS far as i know, the tyres (Pirelli) are texture and not a config file (txt)
You can change them from the car's skins folder
now, if the author uses another method for the tyres texture, i don't know
BTW, the front (EXT) banner is behind the glass(EXT)
But is this a mod or kunos car?

It´s the kunos car

assettocorsa/extension/config/cars/common/gt3_tyres_kunos.ini
I just delete everything inside that .ini and save it.

Yeah, that´s the solution thanks a lot!!