Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 156,500 comments
  • 50,595,883 views
add new rearwing
add new hood´s
add hood options
preview.webp
preview.webp
 
shi
Shortwood Park v1.01

View attachment 1553157
Fictional street circuit in Michigan, USA.
Conversion from GTR2.

-CSP recommended
-28 pit/start
-AI, cam

Credits & Thanks;
Original Track from Toca Race Driver 2
GTR2 conversion by GTI-HEIZER

AC Converted by shin956
fast_lane.ai by Quark67
Crowds texture by Kniker97
marshall and some textures by kunos

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Changed fast_lane.ai by Quark67. (Thanks)
Fixed an issue where the FPS dropped significantly under tunnel lights. (Thank you StoffelWaffle for your report.)
Updated ai_hints.ini and audio_sources.ini.

Shortwood Park v1.01

v1.01 changelog;
Changed fast_lane.ai by @Quark67 . (Thank you)
Fixed an issue where the FPS dropped significantly under tunnel lights. (Thank you @StoffelWaffle for your report.)
Updated ai_hints.ini and audio_sources.ini.
 
Last edited:
Is anyone having issues with the M3 GTR lagging badly with multiple cars on track? If I run a single car practice, the game runs fine, but as soon as I load a race weekend with just a few of the same cars, my wheel and pedals lag by several seconds. I tried restarting CM, no help. I'll try reinstalling the mod manually.
 
Last edited:
Back to questions of early 2000s GT cars, is there a decent mod of the Esperante GTLM?

1785081368638.webp

I got this one but it feels like its down 200 horsepower....
 
Last edited:
Slimming power lines for that track, magic trick courtesy of Masscot (as always, add to the end of ext_config.ini and shake, but not stir):

[SHADER_REPLACEMENT_...]
DESCRIPTION = fix for thick powerlines, fence meshes etc
MATERIALS = WIRES
MESHES = WIRES
IS_TRANSPARENT=1
BLEND_MODE=ALPHA_BLEND
PROP_... = ksAlphaRef, 0.1

I don't know if it's necessary to add "WIRES" twice (to "MATERIALS" and "MESHES") and I haven't noticed any difference when increasing or decreasing the digits of "PROP_... = ksAlphaRef" to check if the power lines could be seen a little thinner, but the fact is that with this code they improve somewhat compared to how they originally look.

EDIT: Phew, this is more complicated than it seems; I just saw that the results appear to vary depending on the layout... 🫤
You were almost there :). Just write:
MESHES = WIRES, wires

MESHES and MATERIALS names are case sensitive

You can also delete the line MATERIALS = WIRES


I have no problems with shin's Detroit 1982 / 3 version but the later iterations suffer from the same fate, horrible FPS loss when tunnel lights are on.

And weirdly enough I can race at night at Marina Bay or LV without encountering said FPS losses despite these tracks being more 'modern'.

I give up.
Try unchecking Settings/CSP/ExtraFX/extension/Active
 
Last edited:
Back to questions of early 2000s GT cars, is there a decent mod of the Esperante GTLM?
The NMS Labs one is pretty good, it's got physics by TomSim so it races very well with his other GT2s as well as the MaxStdt Porsches. (I just saw FrustratedUse said the same thing but that's what I get for typing before reading the rest of the replies I suppose)

Anyway, I found out that the VRC csp LMDh cars don't really work with AI drivers in csp 3.0, at least on the latest preview. The VRC csp LMH cars are fine though. I'd roll back to test the csp and non csp versions against eachother to see what the actual difference in performance is between the two in ai hands, but I don't know if I care that much.
 
The car isn't finished yet; I just wanted to get your opinion on what could still be improved.

Released : BMW M3 GT2 (E36) ´95 (Version 0.99)

Author:F302

3D Model Car : Shift2

Texture Update : F302 (rework)

Skins: F302

3d work: F302

hope u enjoy the Car

ps : send feedback ,bugs ,missing things

tested on CSP 0.3.0-preview440

PP filer PURELIFE EVO GT,SKY GT

have fun!


20260726-202848-industrial-f302_bmw_m3_gt_e36-accum.webp
 
The car isn't finished yet; I just wanted to get your opinion on what could still be improved.

Released : BMW M3 GT2 (E36) ´95
(Version 0.99)

Author:F302

3D Model Car : Shift2

Texture Update : F302 (rework)

Skins: F302

3d work: F302

hope u enjoy the Car

ps : send feedback ,bugs ,missing things

tested on CSP 0.3.0-preview440

PP filer PURELIFE EVO GT,SKY GT

have fun!
I will make some comparison with the NMS car because I literally just drove that.

I don't use VR any more so no comment on cockpit niceties, I thought the dash you can see in normal cockpit view looks nicer than NMS's. I am assuming the display under the tach not working is known? Exterior looks nice. The driving dynamics feels pretty fun, though default setup is very loose so I ended up have to make big swing in setup to make it driveable. I think the pace feels more realistic but NMS's Patreon did say he tried to balance his with the GTN cars. The engine sounds great. Nice BMW I-6 roar. Enjoyed the drive. Look forward to the finished item.
 
The car isn't finished yet; I just wanted to get your opinion on what could still be improved.

Released : BMW M3 GT2 (E36) ´95
(Version 0.99)
It would be good if everybody forget this front bumper... That is not an E36 GT or GTR front bumper. I don't know where is the model comes from, maybe some NFS or Forza model, but that trapezoid shape air intake in the front bumper is very disappoint for me. I don't belive it is a GTR which is race in ADAC GT or IMSA.

And the line in the center of the car is run from the first wheel, over the door to the right wheel.

Here is some picture in the links and the attachments with the real front bumper. I will be glad if you can change it!
 

Attachments

  • P0036783.webp
    P0036783.webp
    188.8 KB · Views: 1
  • 1785100721156.webp
    1785100721156.webp
    27.1 KB · Views: 1
  • 1785100888323.webp
    1785100888323.webp
    55.3 KB · Views: 1
  • 1785101010153.webp
    1785101010153.webp
    114.2 KB · Views: 1
It would be good if everybody forget this front bumper... That is not an E36 GT or GTR front bumper. I don't know where is the model comes from, maybe some NFS or Forza model, but that trapezoid shape air intake in the front bumper is very disappoint for me. I don't belive it is a GTR which is race in ADAC GT or IMSA.

And the line in the center of the car is run from the first wheel, over the door to the right wheel.

Here is some picture in the links and the attachments with the real front bumper. I will be glad if you can change it!

It's from the need for speed shift games. Supposedly @ItsHords is going to work on a proper one after him & Nuvo finishes their 993 GT2 car.
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back