Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Paiky
  • 129,751 comments
  • 33,498,595 views
wow thank you very much, I was looking for something like that but could not find it, above all this is very useful to me right now.


To be more exact, this is what I was specifically looking for

1B: Spawn & timing objects:
Depending on the type of location you are planning to make, the minimal * objects needed in order to make your track work in all modes (race, hotlap, practice) are:
For circuit-type tracks:
AC_START_0
AC_START_1
AC_PIT_0
AC_PIT_1
AC_HOTLAP_START_0
AC_TIME_0_L
AC_TIME_0_R
AC_TIME_1_L
AC_TIME_1_R
.

With this code now if I can change the configuration of the map 'Quattro' and (it should) be possible then to make functional car spam on trackday


*
Thinking about it, this now forces me to start doing everything again, in the end the rework of that map is going to be done in August :banghead:

All the things explained in the first page are (at lest 75%) mandatory for a quality final work, few of them are optional to improve, but spawn points and timing are mandatory for full working conversion-modding
 
All the things explained in the first page are (at lest 75%) mandatory for a quality final work, few of them are optional to improve, but spawn points and timing are mandatory for full working conversion-modding
Totally agree, it is a very good beginner tutorial, it goes directly to the important thing without going around the bush and without explaining things too much, and this is good for a beginner, then you can dig as deep as you can.
 
@CrisT86


By the way, I'm already starting to see some basic mistakes converters make when it comes to creating a friendly AI.

A very common error (as I see it) is that pitbox spaces are not renamed correctly when converting to .kn5 format and this gives a lot of errors, AC cannot read when assigning pitbox * 01, 02, 03

AC read this * 1,2,3

And in the original source they come like this * 01, 02 ... etc



This may be because there are many tutorials to convert from XXX to AC, but finding a detailed tutorial on how to condition the track for use with AI is already more difficult, and I don't know, but I think that part would not take more than two or three hours. work (more) than basic cut and paste conversion.

* https://www.racedepartment.com/downloads/gran-turismo-trial-mountain.33845/


This track, for example, has that failure (I think) later I'll look at it, and that's why 9 cars stay on the green flag and don't come out until much later, when they go out they go straight to the wall.
 
Last edited:
Mitsubishi Lancer GT500 (v9)
New skin: Super Sonico and some changes on the olds one
New AO map
New brakes IN/ETX
All part are now UV mapped
New collider/wheel
More paintable parts
Some other micro changes

Make sure you have the V7 first(https://sharemods.com/8ooznljett12/mitsubishi_lancer_gt500__40_v7__41_.rar.html)
Download:https://sharemods.com/ti5029d53ewo/mitsubishi_lancer_gt500_v9.7z.html
Fix (puma skin):https://sharemods.com/iqm0ww3p24iy/mitsubishi_gt500_puma_fix.rar.html
Q3i6vilm.jpg
0IiNuuKm.jpg

U86s3ccm.jpg
fTeaIx7m.jpg
2906wOWm.jpg
tZCoitjm.jpg
 
I have a version of Jarama, for Race Injection, that initially came from rFactor1, that I think looks quite good (for a gMotor2 game). In the hands of an experienced converter it would look rather nice, I think, maybe better than all the version we have today for AC. I sent it to _EASY_ but he disregarded it in favour of the AMS version. If someone wants to take a look at it, send me a shout...
 
Last edited:
Midweek update madness!!!

Zurich-eprix v1.10
upload_2021-6-9_14-8-34.jpeg

v1.10 changelog by @shin956 ;
Reworked trees
Adjusted some shaders
Updated grass texture
Created overlays.ini
Adjusted ext_config.ini
Added a blinking flag light
Created a new camera

:: DOWNLOAD ::
:: mirror ::

Troyton Raceway
v1.10
Screenshot_lancia_delta_intergrale_evo_rmi_troytonraceway_9-6-121-14-27-34.jpg

v1.0 changelog by @shin956 and @RMi_wood;
Create two layouts (GP, Club)
Physical mesh added
Reworked the trees
Adjusted shaders
Adjusted ext_config.ini
VAO has been renewed
New map.png
Updated grass texture
Surface adjustments
Create overlays.ini
Adjust groove.ini
New AI + cam for Club layout
Added reverberation to the tunnel
Loading screens & updated banner skin
Random small fixes

:: DOWNLOAD ::
:: DOWNLOAD v1.10 ::
:: mirror ::

Helsinki International Circuit v1.10
Screenshot_lancia_delta_intergrale_evo_rmi_hesinkigp_9-6-121-14-39-33.jpg

v1.10 changelog by @shin956, @CrisT86, @RMi_wood
Added barrier to the long layout before the double straight, fixed DRS zones @Shin956
Added brake markers to the end of the long layout double straight @RMi_wood
Added ambient / banner / tso lighting - @CrisT6

:: DOWNLOAD ::
:: mirror ::
 
Last edited:
Mitsubishi Lancer GT500 (v9)
New skin: Super Sonico and some changes on the olds one
New AO map
New brakes IN/ETX
All part are now UV mapped
New collider/wheel
More paintable parts
Some other micro changes

Make sure you have the V7 first(https://sharemods.com/8ooznljett12/mitsubishi_lancer_gt500__40_v7__41_.rar.html)
Download:https://sharemods.com/ti5029d53ewo/mitsubishi_lancer_gt500_v9.7z.html
Fix (puma skin):https://sharemods.com/iqm0ww3p24iy/mitsubishi_gt500_puma_fix.rar.html
Q3i6vilm.jpg
0IiNuuKm.jpg

U86s3ccm.jpg
fTeaIx7m.jpg
2906wOWm.jpg
tZCoitjm.jpg
Finaly a new itasha for my collection since there isn't any new ones on RD.
 
Hello,

Does anyone have a good Mclaren Senna? The one I have looks nice but the thing is an understeer machine and with only tire pressures to adjust there's not much I can do to it.

Thank you
 
Turns out I didn't feel like procrastinating and ended up updating the Mini. Reconverted it from scratch, and it now has the following features:
  • Working mirrors
  • Corrected steering wheel rotation
  • Fixed transparency issues on interior (although steering wheel badge is still a bit wrong)
  • Separated roof, interior parts, and wheels to allow all to be coloured individually (check out the bluered skin folder for examples)
  • Center tail light, and all pre-facelift lights now work properly
  • Corrected skins not removing the facelift/pre-facelift lights
  • Refined materials all over - parts of the interior are now using PBR, the sat nav works correctly for CSP, and paint jobs now look "more correct"
20210609-133943-gb_gedinne-ta_mini_cooper_s.png

20210609-135715-aspertsham-ta_mini_cooper_s.png

20210609-135742-aspertsham-ta_mini_cooper_s.png


For the next update I'll likely add the other rim options that it had from CSR2 with an example file showing how to replace them.

Make sure to delete and replace any previous versions.

DOWNLOAD
 
Help needed! I'm looking for someone who's willing to help me with doing a rims swap on the FunCup car. Been working on it myself, but it keeps resulting in a wobbly wheel. I found the exact rim model that's being used in the real series. Drop me a PM if you're willing to help and I'll sent you the files. Thanks a lot in advance!

Edit: deleted
Edit2: Got the problem solved myself, no longer needed! Update will come in due course

I have managed to create wiper and door animations in Blender for this car. I'm yet to figure out how to get that working in game. The animations combined with the right rims could make for a good update. Just need to figure out how to get a working Motec inside the car
 
Last edited:
It is true that in the simulator the sensation of a roller coaster that you have driving in the real Jarama is lost, although I suppose you will agree with me, no circuit in any simulator is capable of offering a 100% realistic sensation.

You're absolutely right, but what I really mean is that some corners are too short or too long. In this case in particular... let's say Bugatti, for example. In the sim, it's completely wrong. On the other hand, as I've mentioned before, Valencia feels almost like the real thing to me.

Circuit Long Beach 2019 fm7 by Terra21 + UPDATE cam + skins RD https://evoload.io/v/UNlTrbJNPPzXxr

21_long_beach-optimisation test by jk https://evoload.io/f/am9ot2VIoj3TIP

Can someone post a mirror of this file. I'm having a lot of troubles with this host :-( Thanks in advance.
 
Last edited by a moderator:
Midweek update madness!!!

Zurich-eprix v1.10
View attachment 1016372
v1.10 changelog by @shin956 ;
Reworked trees
Adjusted some shaders
Updated grass texture
Created overlays.ini
Adjusted ext_config.ini
Added a blinking flag light
Created a new camera

:: DOWNLOAD ::
:: mirror ::

Troyton Raceway v1.0
View attachment 1016380
v1.0 changelog by @shin956 and @RMi_wood;
Create two layouts (GP, Club)
Physical mesh added
Reworked the trees
Adjusted shaders
Adjusted ext_config.ini
VAO has been renewed
New map.png
Updated grass texture
Surface adjustments
Create overlays.ini
Adjust groove.ini
New AI + cam for Club layout
Added reverberation to the tunnel
Loading screens & updated banner skin
Random small fixes

:: DOWNLOAD ::
:: mirror ::

Helsinki International Circuit v1.10
View attachment 1016381
v1.10 changelog by @shin956, @CrisT86, @RMi_wood
Added barrier to the long layout before the double straight, fixed DRS zones @Shin956
Added brake markers to the end of the long layout double straight @RMi_wood
Added ambient / banner / tso lighting - @CrisT6

:: DOWNLOAD ::
:: mirror ::

Issue with Helsinki download link from RaceDepartment.

upload_2021-6-9_9-17-37.png


I think this is the correct link...
https://www.racedepartment.com/downloads/helsinki-international-circuit.43067
 
Last edited:
Turns out I didn't feel like procrastinating and ended up updating the Mini. Reconverted it from scratch, and it now has the following features:
  • Working mirrors
  • Corrected steering wheel rotation
  • Fixed transparency issues on interior (although steering wheel badge is still a bit wrong)
  • Separated roof, interior parts, and wheels to allow all to be coloured individually (check out the bluered skin folder for examples)
  • Center tail light, and all pre-facelift lights now work properly
  • Corrected skins not removing the facelift/pre-facelift lights
  • Refined materials all over - parts of the interior are now using PBR, the sat nav works correctly for CSP, and paint jobs now look "more correct"
View attachment 1016382
View attachment 1016383
View attachment 1016384

For the next update I'll likely add the other rim options that it had from CSR2 with an example file showing how to replace them.

Make sure to delete and replace any previous versions.

DOWNLOAD

I had an issue downloading this. I copied the link, and once it had http:// in front of it, it downloaded. Not sure if this is the fix.
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back