Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 156,663 comments
  • 50,723,372 views
leBluem
Imho all configs should be on Github, so updating them would not require downloading the whole track.
Just like I did now:

View attachment 1072542
(also orig. grass is removed again)
https://github.com/ac-custom-shader.../raw/master/config/tracks/acu_hungaroring.ini
https://github.com/ac-custom-shader...ter/config/tracks/acu_hungaroring__lights.kn5
(right click link -> "Save as ...")

Note: i posted direct links, bc Github can be lazy and recognizes updates not immediately, but within a day...


------------------------------------------------------------------------------------------------------------------

https://www.racedepartment.com/downloads/special-route-ax.11403/
cams:

Special Route AX - Helicopter Cameras & AI

Helicams 2 cameras sets, 1 set of Helicams (170+ mph) 1 set of TV cams CAR TAGS with A1 - A15 categories http://www.racedepartment.com/downloads/car-tags-a1-a15.11147/ Note: Due to limitations with camera splines not being linked to car...
www.racedepartment.com www.racedepartment.com
Click to expand...
Dang, you should remove the old

assettocorsa\extension\vao-patches\acu_hungaroring.vao-patch

if you have auto-dl checked here:
1628259500955.png
 
Last edited:
viola89
hey guys I bought the rss gtm pack but both car were without fonts.how can i fix this issue?
Click to expand...
That's weird. Did you buy it from RSS?

Their product comes complete with cars, driver, fonts, and texture folders. And very clear instructions on how to install everything.

If you bought this from RSS and it's missing fonts, you should contact RSS.
 
NewYuriCity
Good eye, I was more surprised by the Transamerica Pyramid in Monaco!

I'm just poking fun @r3b3ld3, you've said many time it's a very early build and the map is looking really great! Not to mention what you've done with the AI going through those narrow streets this early in the build is really, really impressive work. I for one can't wait to drive it someday!
Click to expand...
what is that gauge bottom right?
 
SofianeVAG
Hey guys! Can anyone please help me figure out what is causing this flickering thing on Glensheil mountains? It appears from far away and kind of kills the immersion... Thanks in advance
Click to expand...


I'm pretty sure it's a render problem, due to how close the "snow" object is on top of the "mountain" object, making them to appear like that. If you drive closely to one of the mountain with snow, the flickering stops. I'm afraid the only way to stop that is simply ask for the author to fix it (I'm sure he is already working on it)
 
Hey everyone!

This is a question for the 3D gurus.

Recently I was tring to convert a track from Automobilista to Assetto Corsa, but I'm having some trouble. I was wondering if someone could help me answering some questions.

The main problem I'm having is translating the shaders from AMS to AC. Is there any way I can maintain the textures and shaders settings when converting?

I tried importing the .gmt files in 3dsimed than converting in the following steps with no good results:
  • 3dsimed3 > kn5 > AC
  • 3dsimed3 > fbx > blender > fbx > KsEditor
  • 3dsimed3 > fbx > KsEditor

I tried following Rainmaker's simple tutorial in 3dsimed too but it didn't help much.

My guess is that there are no way to translate AMS's shaders settings to AC, so I would have to do it manually to every object. Is that correct?

I have the GSC version of the track that Malagoli made some years ago and I fixed some stuff he left aside like pit entries and the road physics, but it lacks loads of side objects that were added in the AMS version, that's mainly the reason behind the conversion, the other track layouts would be easy to do with the AMS version too. But for now those are the problems I'm facing right now.

Thanks in advance!
 
@mordido

If you export fbx from a gmt with 3dsimed and make all the objects double-sided that doesn't work well, I guess (guess) that's what fails you.


My guess is that there are no way to translate AMS's shaders settings to AC, so I would have to do it manually to every object. Is that correct?

Yes.
 
@r3b3ld3 I see.. So what would be the best workflow to this specific conversion?

I still want to use blender so I can add the AC objects, fix the pit entries and improve the road mesh.
 
mordido
@r3b3ld3 I see.. So what would be the best workflow to this specific conversion?

I still want to use blender so I can add the AC objects, fix the pit entries and improve the road mesh.
Click to expand...
3ds>fbx>blender>fbx>ksed

I mean maybe you can add the ac objects in 3dsimed but with blender you can tweak some things that work fine in gmotor but are unoptimized for ac´s engine
 
Last edited:
ClaudioWRC74
Hello guys,
I have problem with this skins pack shared here for the Porsche 911 GT3 Cup 2021 (Assettoland version update ATCK)
Not with RD pack (12 skins) but with skins pack shared here this week (6 skins)
I'm not the only one to have this problem.
mega.nz

File on MEGA

mega.nz mega.nz
Thanks for your help


View attachment 1072479

View attachment 1072480
Click to expand...
I got the very same issue, but before installing these 12 skins....Ive deleted the mod installed it again, changes FX settings, but nothing worked for me....Yesterday ive installed these 12 skins, testet the car and everything was fine....I really dont know what it is, but after these skins it went away....Maybe try in ExtraFX activate light bounce.
 
nanenab
While we at it, the Reboot Team zolder is really good, for a track that is not ACC convert. It's just update of existing mod, but it's so much better, I hope the hungaroring is similar in this aspects. And I probably just missed the announcement of updated zolder, but I have to share my experience with it, since it surprised me so much.
Click to expand...
"I'm proud to announce the release of Team Reboot's latest project- an ACC conversion of Circuit Zolder." taken from this post:

www.gtplanet.net

Assetto Corsa PC Mods General Discussion

Brainerd's almost done. Just a few more finishing touches.
www.gtplanet.net www.gtplanet.net
 
Last edited:
Zander71
It's been about a while. The usual version is just called "Hong". Will compare both as there are some file differences.
Click to expand...
What other tracks that is ported from GRID 1/2? I had two drift tracks as of now.

EDIT: Tried it at night & theres one glaring problem...
Screenshot_sl_toyota_supra_mkiv_ridox_st_hongkong_7-7-121-4-45-24.jpg


...there isn't any lights in the buildings as if everyone in China just abandoned them for no reason lol.
 
Last edited:
Someone, please, explain to me how two versions of the same mod can be made physically (which files to modify) independent? Through CM I don't get any results 😥😥. Thank you
 
Last edited:
mordido
Hey everyone!

This is a question for the 3D gurus.

Recently I was tring to convert a track from Automobilista to Assetto Corsa, but I'm having some trouble. I was wondering if someone could help me answering some questions.

The main problem I'm having is translating the shaders from AMS to AC. Is there any way I can maintain the textures and shaders settings when converting?

I tried importing the .gmt files in 3dsimed than converting in the following steps with no good results:
  • 3dsimed3 > kn5 > AC
  • 3dsimed3 > fbx > blender > fbx > KsEditor
  • 3dsimed3 > fbx > KsEditor

I tried following Rainmaker's simple tutorial in 3dsimed too but it didn't help much.

My guess is that there are no way to translate AMS's shaders settings to AC, so I would have to do it manually to every object. Is that correct?

I have the GSC version of the track that Malagoli made some years ago and I fixed some stuff he left aside like pit entries and the road physics, but it lacks loads of side objects that were added in the AMS version, that's mainly the reason behind the conversion, the other track layouts would be easy to do with the AMS version too. But for now those are the problems I'm facing right now.

Thanks in advance!
Click to expand...
gmotor "shaders" are similar in some cases and 3dsim tries to fill out what it can, but completely different in others, the patchy grass/terrain for example is a 10 texture material,

albedoRoughA
albedoRoughB
albedoRoughC
albedoRoughD
pattern
mixSpecular
normalA
normalB
splatterMap
splatterOverlayMap

(and depending on the modder any amount of these are used or unused)

no such shader exists in AC.. not even close.. which is why the grass always looks crap when you convert ams tracks, anthing from 60% of the intended look is lost on cenversion, and in this case can neve actually be applied.

Trees are a killer because the engines differ, gmotor uses camera facing trees, so AMS tracks, the trees have to be converted to Y or X plane trees or jsut replaced with new trees.

Outside of that AMS tracks are probably the easiest to convert, the rest is jsut rename and drive typically.
 
Last edited:
Gabriele
Someone, please, explain to me how two versions of the same mod can be made physically (which files to modify) independent? Through CM I don't get any results 😥😥. Thank you
Click to expand...
If you're looking to copy a mod/car the easiest way is to just load a car into AC Car Tuner and you can copy the car and it will allow you to have 2 versions of the same car, just call the other a slightly different name. Otherwise you need to re-name files etc. and that can be a pain.

Jdramirez
What other tracks that is ported from GRID 1/2? I had two drift tracks as of now.

EDIT: Tried it at night & theres one glaring problem...
View attachment 1072681

...there isn't any lights in the buildings as if everyone in China just abandoned them for no reason lol.
Click to expand...
I'm not 100% sure as there are ports from Grid, Shift, Forza and GT and they all have a similar look. But there's Milan, Barcelona, Chicago, Miami, Dubai etc. Most of them are great.
 
MrB00
I could never get car tuner working - but if it works for you then that is probably the easiest way. But renaming 6 files isn't too hard either.
CTRL+C / CTRL+H in notepad++ is the quickest way to rename the sound files too
Click to expand...
Yeah I was trying a few changes recently and it copies the whole car and any changes you've made. Very easy.
 
Gabriele
Someone, please, explain to me how two versions of the same mod can be made physically (which files to modify) independent? Through CM I don't get any results 😥😥. Thank you
Click to expand...
Do you mean how to separate the parent car from the "alternate" version?
You can try this: move the parent car folder on your desktop. Open CM, select the alternate version: now cm says "Parent car is missing". Choose the option "make indipendent" (or something like that) ad here you go. I hope it will work for you 😁
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
4K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
42 43 44
Replies
1K
Views
284K
imported_rik19
imported_rik19
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
249
Views
46K
MagpieRacer
MagpieRacer
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
21K
Cote Dazur
Cote Dazur

Latest Posts

Back