Assetto Corsa PC Mods General DiscussionPC

[safi hellie]

Can I ask a question that might be (ok it is) off topic of the thread?
I don't really use social media and really only use this forum and thus mainly this thread.

The very quick question is, because google seems to conflict.
I am thinking of getting a gtx 1070 to pair with my i7 4790 on my desk computer which i use for work and modding, with this i want to then use my VR that sits there never being used, so i can stretch out with it use it for non driving VR games.

All i need to know is how do i go about using my steam on this other computer and can it mess at all with the steam stuff on my main system in another room?

Can i play my steam games on any other computer basically with no fear of messing anything up? Is it separate?
Or do i need to have new steam account? Which would actually be fine.

 

[racealot]

Aston Martin Racing - LM LiquiMoly Livery

Turner Motorsport (revised) replica...
download

 

[Cote Dazur]

Which would actually be fine

Fine? Except for having to buy the games a second time?

 

[Alguecool]

Fine? Except for having to buy the games a second time?

Family mode. You can share your games from account to account and play it freely, just not at the same time, but that wont be a problem for him.
Yeah, I would suggest a second account then family mode just to be very very sure, but Steam should be able to seperate hardware sources anyway.

 

[Ale2Passos]

Can I ask a question that might be (ok it is) off topic of the thread?
I don't really use social media and really only use this forum and thus mainly this thread.

The very quick question is, because google seems to conflict.
I am thinking of getting a gtx 1070 to pair with my i7 4790 on my desk computer which i use for work and modding, with this i want to then use my VR that sits there never being used, so i can stretch out with it use it for non driving VR games.

All i need to know is how do i go about using my steam on this other computer and can it mess at all with the steam stuff on my main system in another room?

Can i play my steam games on any other computer basically with no fear of messing anything up? Is it separate?
Or do i need to have new steam account? Which would actually be fine.

You can play your Steam games on another computer without problems, you just have to log in. But you can only do it on one computer at a time.

 

[safi hellie]

You can play your Steam games on another computer without problems, you just have to log in. But you can only do it on one computer at a time.

Cool, cheers. That's what I'll do then as GTX 1070's are cheap as chips again and i'll only need it for basic free VR games anyway, just need to get some sort of monies worth from VR, hate it in driving games makes me feel sick.

 

[MasterFocus]

Thank you for this explanation guys, it really helps. Wouldn't be possible to force hardware lock manually adding it in ini settings if some sort? I will then set 900 degrees in Ac as per my driver settings, tick the "adjust to match car" and tick soft lock for now. What about enhance understeering effect? Would you recommend it? I honestly love to feel the steering apply as much force as possible to really give me the sensation of driving a real car. Also in case the lock should not adjust itself car by car how could I manually do it in game?

This is STEER_LOCK under [Controls] in car.ini
Rotation from lock to lock

 

[safi hellie]

Heads up there is a bunch of skodas knocking around by some guy called fuzo, don't let 'skoda' put you off, they are top draw IMO.
And who wouldn't be curious about a retro skoda group 5 car?

I think atck is adding them on his site as where I got them from I can't link to it as I'll get slapped wrists.

 

[ZombieBoy1978]

Heads up there is a bunch of skodas knocking around by some guy called fuzo, don't let 'skoda' put you off, they are top draw IMO.
And who wouldn't be curious about a retro skoda group 5 car?

I think atck is adding them on his site as where I got them from I can't link to it as I'll get slapped wrists.

Doesn't Fuzo work with TMM? They have a bunch of Skodas on their site so probably the same cars.

 

[Masscot]

This is STEER_LOCK under [Controls] in car.ini
Rotation from lock to lock

... and not to be confused with LOCK under [STEER_ANIMATION] in data/driver3d.ini, which a lot of Silly Billy Facebook modders set the same as the STEER_LOCK value, then (because they test their cars exclusively in chase cam) never even realise that the driver now steers with his hands sliding around the steering wheel as if we've just interrupted him pleasuring himself with butter.

 

[Fanapryde]

.../...by some guy called fuzo.../...

You don't seem to know Fuzo ?
He's from the TMM (Trained Monkey Modding) group. They already brought us (among others)

• Lausitzring
• Pau
• Oschersleben
• Most
• Sachsenring
• Skoda 130rs (and several others)
• Cupra Leon Competition
• Renault Clio RS Cup

All great stuff... certainly worth having

https://tm-modding.eu/

Btw: this bunch of Skoda's isn't made by Fuzo. Some of the guys there went a little overboard...

 

[xNAPx]

This is STEER_LOCK under [Controls] in car.ini
Rotation from lock to lock

You mean the one in car data folder? I thought that one was to assign the car a specific lock and not the steering wheel

 

[safi hellie]

You don't seem to know Fuzo ?
He's from the TMM (Trained Monkey Modding) group. They already brought us (among others)

• Lausitzring
• Pau
• Oschersleben
• Most
• Sachsenring
• Skoda 130rs (and several others)
• Cupra Leon Competition
• Renault Clio RS Cup

All great stuff... certainly worth having

https://tm-modding.eu/

I knew of TMM
I don't see these on their website.

 

[Raphael87]

Fuzo... all cars in description

 

[shauncurtis]

Yep, that did the trick. LCD works now. 👍

Hi. I don't claim to know much about these ext, but I was playing around and put Active 0 in these two and it works. No clue what's in here that is stopping it.


; For demonstration purposes let’s replace interior rear view mirror with a mirror with extra features:

; Hide original mirror mesh
[SHADER_REPLACEMENT_...]
MESHES = Extra_Mirror_SUB1
LAYER = 10
ACTIVE = 0

; Create a new mirror mesh
[INCLUDE: common/displays.ini]
[DisplayShape]
MeshName = __mirror_display_mesh
ScreenScale = 256
ScreenAspectRatio = 0.5
MatrixType = TN
TreatTextureAsHDR = 1
P1 = -0.033037, 0.853015, 1.069863 ; four corners of new mirror
P2 = -0.109149, 0.844854, 1.013162 ; hold alt and click with objects inspector to get in-car coordinate
P3 = -0.109451, 0.773587, 1.023871 ; pro tip: with 0.1.76, hold Shift to get six digits after the delimiter
P4 = -0.033524, 0.781760, 1.080841
ACTIVE = 0

Every think else is as is.

 

[Frank25]

The very quick question is, because google seems to conflict.
I am thinking of getting a gtx 1070 to pair with my i7 4790 on my desk computer which i use for work and modding, with this i want to then use my VR that sits there never being used, so i can stretch out with it use it for non driving VR games.

I'm using my old PC with Intel Core i7-4790K CPU, 16 GB DDR3-2400 RAM, NVIDIA GeForce GTX 1070 to play AC with my Oculus Rift CV1 since 2015 and it works very well. With optimized 3D settings in the NVIDIA control panel (with latest driver 527.37) and in the Content Manager (with CSP 0.1.79 + SOL 2.2.5) I can use grids up to 30 cars without a problem. To make it possible to play with very high graphics settings I use my Rift CV1 with the 45 Hz ASW mode and 1.5 super sampling (setup with Oculus Tray Tool).

To prevent sickness in VR while driving, the MOST IMPORTANT thing is to activate "lock onboard camera to horizon" in the AC settings under "View & UI / Camera". This is similar to what the human in-ear does in real life, if you look to the horizon (e.g. look at the horizon to prevent sea sickness, if you're on a ship in stormy sea).

I can share my settings with you. Just send me a PM.

 

[TuranRabat]

Fuzo... all cars in description

Are those any good? I know I could try them out myself, but I have about 650 in my to-try-list already...

 

[nanenab]

is that skoda group 5 car part of the pack linked above? nvm, it is

 

[Fumblefap]

Are those any good? I know I could try them out myself, but I have about 650 in my to-try-list already...

They seem pretty fun so far, although:

1) The 130 L/A, when given to the AI, breaks down after about 300m.

2) The MTX 160 seems completely borked. It won't go out of neutral.

 

[Fall Guy]

Tbh I don´t know the source, but here it is what I got:

 

[Fall Guy]

Heads up there is a bunch of skodas knocking around by some guy called fuzo, don't let 'skoda' put you off, they are top draw IMO.
And who wouldn't be curious about a retro skoda group 5 car?

I think atck is adding them on his site as where I got them from I can't link to it as I'll get slapped wrists.

You can easily find these Skodas completely legit with a YT search, this group has an official YT channel, without doing the extra mile to our Russian friends.

 

[NivekBS]

I finally bought the VRC Touring cars and BOPed them with the other available cars with ballast and restrictor.
At Donington i got the whole grid whishin 1 sec. Silverstone within 2.2 seconds.
Maybe intesrresting for someone

Btw. I am using the nonCSP version cause i am running an older CSP version (and so far i can not complaion about the physics )
So what i have done was:

PM3 Nissan and Volvo got 130kg ballast
PM3 BMW - no ballast
The VRC cars: Honda, Ford, Vauxhall got 60kg ballast
The f302 cars: Renault, Alfa, Audi - no ballast
GTsupreame - Peugeot (grid filler) got 150kg

All cars except the BMW got addiitonally 3% restrictor.

I am happy with the result for now. It´s like a BOP Version 0.5 The cars are good mixed in results.

 

[Peugeot905]

Upating Reynard Prototypes

LMP900 and LMP1's

Massive pack with nearly every Reynard-based LMP900 and LMP1

release Planned in mid to late January, after Lola B2k/10 Pack

Planned release in 2 or 3 parts

Cars

Protran RS06/H (Reynard) AER (previously Released another update, some model work)
Reynard 01Q Cosworth Nasamax Lemans (Near Complete)
Reynard 01Q Cosworth Nasamax ALMS (Not Started)
Reynard 01Q Ford Cosworth/Nicholson-McLaren (Mid Way through)
Nassamax DM139 (Reynard) Low Wing (Mid Way through)
Nassamax DM139 (Reynard) High Wing (Mid Way through)
Reynard 2KQ Chrysler (Near Complete)
Reynard 2KQ Judd (Near Complete)
Reynard 2KQ Lehmann HPT16 (Started)
Reynard 2KQ ALMS Maximum Downforce (Near Complete)

Here are the ones where the modeling is complete at least.

 

[Aaron Green]

Correct me if im wrong - but in regards to the balancing of the VRC touring cars and the p3dm cars, could you not just adjust the AI file in the data folder? Could you not just increase the [ULTRA_GRIP] value? This would make the AI have more cornering grip - surely? Then it would just be a matter of balancing the AI to your skill levels now that the AI are playing better with one another. I have also, as mentioned by other members altered the ride height of the p3dm cars, which does help alot. But would that be a quick and easy fix to speed up the VRC AI?

 

[RMi_wood]

Are those any good? I know I could try them out myself, but I have about 650 in my to-try-list already...

no worries for you...
dir /S of my car download (not tried folder) = 2227 File(s)

 

[Daniel Graf]

I hope you might be able to help. I do not have the tickbox "use csp showroom" in my CM. I can either use the standard showroom or the CM showroom. I would really like to have the option to see CSP related changes to the cars in showroom.

Thanx for your help

 

[xNAPx]

Speaking of showroom is there any option to have in-game the same quality models of the CM showroom?

 

[NivekBS]

Correct me if im wrong - but in regards to the balancing of the VRC touring cars and the p3dm cars, could you not just adjust the AI file in the data folder? Could you not just increase the [ULTRA_GRIP] value? This would make the AI have more cornering grip - surely? Then it would just be a matter of balancing the AI to your skill levels now that the AI are playing better with one another. I have also, as mentioned by other members altered the ride height of the p3dm cars, which does help alot. But would that be a quick and easy fix to speed up the VRC AI?

I do not use CM and have not really clue of data modding, so i just proposed the "easy way" for me.

 

[TonySSS]

Upating Reynard Prototypes

LMP900 and LMP1's

Massive pack with nearly every Reynard-based LMP900 and LMP1

release Planned in mid to late January, after Lola B2k/10 Pack

Planned release in 2 or 3 parts

Cars

Protran RS06/H (Reynard) AER (previously Released another update, some model work)
Reynard 01Q Cosworth Nasamax Lemans (Near Complete)
Reynard 01Q Cosworth Nasamax ALMS (Not Started)
Reynard 01Q Ford Cosworth/Nicholson-McLaren (Mid Way through)
Nassamax DM139 (Reynard) Low Wing (Mid Way through)
Nassamax DM139 (Reynard) High Wing (Mid Way through)
Reynard 2KQ Chrysler (Near Complete)
Reynard 2KQ Judd (Near Complete)
Reynard 2KQ Lehmann HPT16 (Started)
Reynard 2KQ ALMS Maximum Downforce (Near Complete)

Here are the ones where the modeling is complete at least.

View attachment 1220621 View attachment 1220622
View attachment 1220623 View attachment 1220624

You started reworking those GTR2 models recently? Good, they badly needed a rework eventually since they all look so dated from decades ago.

 

[ukzz4iroc]

Tbh I don´t know the source, but here it is what I got:

View attachment 1220619

I think it's the Assetto Drive model.