Assetto Corsa PC Mods General DiscussionPC

[Perico Lospa]

... This kind of car makes me wish I have more time and knowledge to create car mod.
View attachment 1234954...

Those bad boys, like Littlebird, are superfun to drive... I always thinks about a grid full of various of that little bast**ds, it can be a blast.

Hi mate.

Don't know if it will help you, but whenever I get that kind of silly issue, I usually fix it by going to CM Showroom.
Select car icon - Driver & Crew - Driver - Movable Driver - 'T' key and then move your driver until the head stay
inside the car. Save and exit...

Thank you so much! I'll try it.

Normally I don't like to mess with this kind of things, because I'm a chicken; I don't know very well how to do it and it's hard to find detailed information about it, but little by little, with the help of you, those who know the subject, I'm daring to make some small corrections. For instance, a couple of days ago I learned how to correctly place the smoke from the exhaust pipe.

And longer ago, and the hard way after having misfortuned some car, I learned the Golden Rule: always make a backup of the mod in danger of being "modded" by me...

 

[EvilGloomy]

I wish we could raise/lower the steering wheels this way too. Many cars I like to drive in VR have their wheels way too low.

that is much necessary, so many encrypted mods are trashed because the steering wheel position is not in the correct place.

 

[porsche 919]

is there any Audi R8 lms gt3 evo 2 mod?

 

[Camill08]

6 chameleon skins for one of my top favourite convertibles, the Porsche 918 Spyder Roadster Weissach package (ad_porsche_918_weissach_roadster).

View attachment 1231349

View attachment 1231338

View attachment 1231339

View attachment 1231341

View attachment 1231346

DOWNLOAD
should be drag&drop in CM (IF you have the car already installed)
This rar also contains a sound replacement with a better one, from the 918 from S.Stirpe. (But original sound included should you want to revert).
Does not change/overwrite anything else from the original mod.

is possible to use them also on the Kunos 918 Spyder? If not can you tell me where to find this specif car? TIA

 

[El Locho]

The same happens with Guerilla's BMW M2 CS, it seems that there are no windshields in that car..
Is there any fix for this?

The following snippet (append to ext_config.ini) will add internal windows by duplicating and inverting the outer window mesh:

[MESH_SPLIT_...]
MESHES = Window_Geo_lodA002
MODE = COPY_FLIPPED
SPLIT_MATERIAL = windows_int
INSERT_AFTER = Window_Geo_lodA002

[SHADER_REPLACEMENT_...]
MATERIALS = windows_int
SHADER = ksWindscreen
PROP_... = bannerMode, 1
RESOURCE_0 = txDiffuse
RESOURCE_FILE_0 = glass.dds

It's not perfect though since there are rain drops under the window banner:


Thanks to 2dieonarrival for pointing out this method in the comments of my "How to add internal windows to a car mod in Blender" video. Since there's hardly any documentation for the MESH_SPLIT function, it might make sense to add this use case to the documentation (@leBluem is this something you can do)?

 

[Fanapryde]

I wish we could raise/lower the steering wheels this way too. Many cars I like to drive in VR have their wheels way too low.

This...and not only in VR...

 

[Perico Lospa]

This...and not only in VR...

Yeah, with 3 screens sometimes is difficult to achieve a real perspective, based in the virtual steering wheel position, when playing in first person.

And another point is the position in the dashboard of laptimers or rearview monitors, that often keep out of sight... I don't know if those elements can be placed in a convenient position as simply as the exhaust smoke, changing coordinates, I will have to learn...

 

[Juppek]

Is it even possible to do a real Indy 500 race or something like that because CM just let's me do a max of 120 laps, need 80 more...

 

[Friedhelm]

Is it even possible to do a real Indy 500 race or something like that because CM just let's me do a max of 120 laps, need 80 more...

Settings -> Content Manager -> Drive -> Expand Bounds

Tick that and you can use 999 laps.

 

[NivekBS]

Ferrari F40 '92(v1.3) by F40 LM Lover

It is required CSP 1.76 or above Version.
Some Features are changed or fixed/Added
I Hope that this version will be final version.

1. Change Logs
1) Interior Parts are changed and improved (ex. Steering Column is changed from GTS parts)
2) Interior's Shaders are improved
3) Car is Optimized.
-. Number of Objects is reduced without visual Impact(305s to 258s)
-. Lods are optimized.
3) Lighting Effects and refractions of Light are working with animations
4) Driver's Animations are improved.

2. Thank You!

While loading "Audio" the car is crashing. I am on CSP 1.76p92
Should just work.... any advice/idea ? TIA

 

[Juppek]

Settings -> Content Manager -> Drive -> Expand Bounds

Tick that and you can use 999 laps.

I did it but it is still just going up to 120

Forget about it, I know now

Thanks a lot mate

 

[jac0]

is possible to use them also on the Kunos 918 Spyder? If not can you tell me where to find this specif car? TIA

short answer : no ... (long answer : yes , but withtweaking ... the names of the Materials and textures are different .. you can easily change them all yourself - in CSP Showroom you can find the names ... then edit the ext_config.ini file in each skin folder and put the correct Material names, and alos rename the dds files for the textures, like the leather ... these also can be found in CSP Showroom)

This version is better then Kunos version imho, and you can find it by doing this DuckDuck search
(first hit yields this: direct download)

 

[Camill08]

Porsche 959 - 1987
Updated v3.0 by Real Specs

View attachment 1234757

View attachment 1234758

verison 3.0

working wipers

windows adjust for rainfx

full functional lights

HiRes interior gauges

add odometer

corrected interior textures

rear lights small tweaks

add license plate

small data adjustments (mainly suspension and physics)
------- ------ ----- ------

Hope you enjoy & give feedback!

Download link:

Porsche 959 - 1987 (Assetto Corsa Mod) | REAL SPECS

Get more from REAL SPECS on Patreon

www.patreon.com

There are so many 959 out there that I don't know which is the best looking and drivable out there. Is this or you are aware of a better one?

 

[jac0]

There are so many 959 out there that I don't know which is the best looking and drivable out there. Is this or you are aware of a better one?

the only other '86-'87 959 which I have in my fairly large collection (+6000 cars) is this one from GeroDa74.
(besides some rally and dakar versions that is)

Spoiler: Porsche 959 Komfort

This one has 5 stars in my book... the other one 4.5 , but I may need to re-evaluate that with the recent improvements from Masscot
I haven't driven this one from Geroda in a while, so I should drive one after the other to compare and choose a personal favourite ... (but that is subjective anyway!)
Anyway , check the Geroda74 one , it's very nice as well!
If you (or anyone else) finds another one that they favor, please let us know here (then I can extend my collection even further...)

 

[DaWallace]

The following snippet (append to ext_config.ini) will add internal windows by duplicating and inverting the outer window mesh:

[MESH_SPLIT_...]
MESHES = Window_Geo_lodA002
MODE = COPY_FLIPPED
SPLIT_MATERIAL = windows_int
INSERT_AFTER = Window_Geo_lodA002

[SHADER_REPLACEMENT_...]
MATERIALS = windows_int
SHADER = ksWindscreen
PROP_... = bannerMode, 1
RESOURCE_0 = txDiffuse
RESOURCE_FILE_0 = glass.dds

It's not perfect though since there are rain drops under the window banner:
View attachment 1235008

Thanks to 2dieonarrival for pointing out this method in the comments of my "How to add internal windows to a car mod in Blender" video. Since there's hardly any documentation for the MESH_SPLIT function, it might make sense to add this use case to the documentation (@leBluem is this something you can do)?

Our BMW M2 CS will get an update too. If i get some time, i will look at the M2 CS and will fix and update it.

 

[Fanapryde]

Our BMW M2 CS will get an update too. If i get some time, i will look at the M2 CS and will fix and update it.

Good news. I asked about it some three weeks ago on the GUE forum, without success so far...

 

[DaWallace]

Good news. I asked about it some three weeks ago on the GUE forum, without success so far...

Yeah, sadly no one from our team is regularly looking or active in our forum. I try to check it out from time to time, but i keep forgetting. Unfortunately, I currently have less time for modding as before, because in addition to my time for my family, i am also currently attending school for my master's exam this year. But i had planned a long time ago to bring our BMW M2 CS up to date. As soon as the Toyota SF-R Cup is finished and released, I will also start working on the M2 CS.

 

[SpeedStar2000]

I like to know if anyone ever made this skin for RSS Vortex/Viper. It´s for the Viper West Team (it raced on some Grand-Am events on the early 00´s)

I can answer that and to my knowledge: no. I don't think there is many Grand-am skins at all existing. Or infact almost none exist

 

[safi hellie]

Another WIP, just need to learn to settle on one mod at a time, I am firmly in the knock em out to see it in game camp.
Stupid looking crazy Japanese thing.

 

[Ivunoise63]

is there any Audi R8 lms gt3 evo 2 mod?

Yes

 

[racinjoe013]

When you have a CSP option for render distance, like in this picture, does anyone know what each of the three values represents? This one is for Smart Shadows, but there are other options that use three values for render distances and I don't understand what the three values represent. Thanks...

 

[Brandydo]

There is a WR LMP on Patreon indeed, it's part of the this pack which is in the free tier, so you should be able to download it: https://www.patreon.com/posts/fia-gt-mega-pack-72625834


There are also various TVR's in that pack, but not the Tuscan you are looking for; don't think I've ever seen one.

Anyone know who the person with the Patreon account is? Really frustrating to see skins that I, and others, have spent hours on be not only uncredited for, but profited from.

 

[Wlynsan]

Yeah, sadly no one from our team is regularly looking or active in our forum. I try to check it out from time to time, but i keep forgetting. Unfortunately, I currently have less time for modding as before, because in addition to my time for my family, i am also currently attending school for my master's exam this year. But i had planned a long time ago to bring our BMW M2 CS up to date. As soon as the Toyota SF-R Cup is finished and released, I will also start working on the M2 CS.

Best news I get today!
In fact, in the forum, I offered an ext_config with the panel lighting, and a data, with the adjusted gear ratios.

 

[Fanapryde]

Best news I get today!
In fact, in the forum, I offered an ext_config with the panel lighting, and a data, with the adjusted gear ratios.

Ah, that was you 🙂

 

[Pfalzdriver]

is there any Audi R8 lms gt3 evo 2 mod?

Yes, by FSR. But imo it suxx big times.
They just put another wing to the car, encrypted it and use the kunos physics.

 

[Fall Guy]

There are so many 959 out there that I don't know which is the best looking and drivable out there. Is this or you are aware of a better one?

I got that one here and it´s the best one out there IMO. Jandrovi physics and a decent 3d model. And before you soak my inbox, here is the link. Thanks also to @El Locho who provided the wipers, internal glass and some other fixes as well.

Check also the _details folder inside the archive, there is some nice easteregg included.

Download porsche 959 rar

Download File porsche 959 rar

sharemods.com

 

[Perico Lospa]

Hi mate.

Don't know if it will help you, but whenever I get that kind of silly issue, I usually fix it by going to CM Showroom.
Select car icon - Driver & Crew - Driver - Movable Driver - 'T' key and then move your driver until the head stay
inside the car. Save and exit.

View attachment 1234959

Cheers

MAGIC, IT´S WORKS! 😆 Now the driver helmet don´t protude the roof... THANKS!

With my short brain I have been able to figure out that to move the driver I had to use the floating weird boxed thing that is at the top of the wipers, but since I'm now on fire with "modding" (😙), I would like to learn something new today... What moves the three axis doohickey that I have highlighted in green? I have assumed that is for alter the position of the driver feet, but I'm not sure and I have not dared to mess around much, just in case... 😅

Thank you in advance for your patience, pal.

 

[Elio92]

Aha... I have never used that before. Did now and as far as I can see, after several more laps, all works as intended...
Maybe you might have to clean out old times ?

Hi !

The fun fact about "Performance Delta" is… It’s the vanilla apps from AC ! ^^

So, about the RT Oulton Park v1.2 and my enigma, the mystery stills on my side.
I used the other versions of the track with some other cars and the problem about the first sector also appeared.

I repeat, with the v1.1 and the v1.0, no problem.

Cheers. ;-)

 

[MasterFocus]

Anyone know who the person with the Patreon account is? Really frustrating to see skins that I, and others, have spent hours on be not only uncredited for, but profited from.

That would be @TonyBarracuda I think

 

[jac0]

View attachment 1235254

I got that one here and it´s the best one out there IMO. Jandrovi physics and a decent 3d model. And before you soak my inbox, here is the link. Thanks also to @El Locho who provided the wipers, internal glass and some other fixes as well.

Check also the _details folder inside the archive, there is some nice easteregg included.

Download porsche 959 rar

Download File porsche 959 rar

sharemods.com

wow, thanks! This is the new favorite one for me as well...

That deserves a special paint job, golden rims and special imported leather interior!

DOWNLOAD for this extra skin

EDIT: could someone split some parts like steering wheel/hub center and shift knob/boot cover , so they can get a different texture each?