Assetto Corsa PC Mods General DiscussionPC

[xNAPx]

O

does not mean it does not exist. Not all versions are released to Patreon.

Ah, I didn't know that, where can I find it?

ac.setSpecularColor(rgbColor)
ac.setSunSpecularMultiplier(value)

But most of the time, specular's problems are in fact ambient / sunlight problems...

Where can I edit this values? Ext config?

 

[maximeerkat]

Did you try entering some limit data? Smtg like

[ABS]
SLIP_RATIO_LIMIT=0.12
CURVE=
PRESENT=1
ACTIVE=1
RATE_HZ=250

[TRACTION_CONTROL]
SLIP_RATIO_LIMIT=0.22            ; Slipratio limit before TC engages
CURVE=                            ; Slipratio lookup table with different slipratio limits, in order to define TC levels if present. Leave blank for a single level given by above line. ctrl+T to toggle
PRESENT=0                        ; 1 if present in car, 0 if not present (TC always work if TC assist is activated from realism menu UI)
ACTIVE=0                        ; 1 will make the car start with TC active (if present), 0 will make the car start with TC inactive (even if present). ctrl+T to toggle
RATE_HZ=100                        ; TC pulse frequency. It's better to insert the actual TC pumps refresh rate, than the ECU and sensors frequency
MIN_SPEED_KMH=40                    ; Traction control is set automatically OFF under the min speed value in km/h even if selected as assist by the user.

yeh i tried that first of all. i put everything as it should be like slip ratio limit e.t.c but it made no difference. if you turn on abs and or tc on this car. it will have no brakes and wont move anywhere due to tc being constantly engaged no matter what i do. i have tried every which way but backwards with no effect. thanks for the suggestion though

 

[slider666]

Where can I edit this values? Ext config?

That should be used on a LUA script, if I´m not totally wrong.
To use it in ext_config.ini use for example this:

[SHADER_REPLACEMENT_...]
ACTIVE = 1
DESCRIPTION = change specular shader settings
MATERIALS = material_name_here
PROP_... = ksSpecular, 0.1 ;use proper values here
PROP_... = ksSpecularEXP, 15 ;use proper values here

 

[seamount0]

Each one should test himself FGS! What is good for me can be trash for another, Jesuuuuuuuuuuuuuusssssssss.
And what the hell means 'good physics'?
Again, each one has a personal way of considering 'gp'.

Thank you and have fun.

A great thank you, you really are very nice and of a very great help ... maybe, next time please don't bother Jesus in your (useless) answer.
If you do not know what the hell "good physics" mean, try a RSS mod so you can understand.

 

[Den_88]

i found a bug monaco_1975

 

[Masscot]

View attachment 1272208View attachment 1272207
i found a bug monaco_1975

Tree normals also look borked?

 

[Den_88]

Tree normals also look borked?

Very

 

[Kelpy D]

I wonder why raindrops won't manifest in my screenshots.

 

[multilaf]

Hi, please check this with the following values.

CM/Settings/Custom Shaders Patch/Graphic Adjustments.

Hope this will work for you.
Best Regards?

 

[Kelpy D]

Hi, please check this with the following values.
View attachment 1272218
CM/Settings/Custom Shaders Patch/Graphic Adjustments.

Hope this will work for you.
Best Regards?

It's checked, and it only happens on the free cam/static cam.

 

[ApexVGear]

Hungaroring v1.1
Public release on the Fenryr Patreon

 

[Quark67]

UPDATE Zolder 1967

v3.3
-animated flags by racinjoe013
-removed all people standing in front of the fence
-reimported a road patch

Zolder 1967 v3.5 by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

I think that a reference to "FILE=zolder67_flags.kn5" is missing
inside "_extras\more bumpy road surface by Ludwig6666\models.ini"

 

[Fanapryde]

Sachsenring 1967 from @Rainmaker87

If you like (far) less spectators you can add this code to the ext_config.ini in the extension file of the track folder.
I didn't remove all of them, only the cardboard rows that bothered me the most, as well as the spectators sitting on poles (though I am aware that it has been like that in that era - I guess safety wasn't their main concern back then)

But they look so sad....
Anyway: if you don't like the result, just remove these lines again and you're back to the original.

 

[slider666]

Tree normals also look borked?

And not only tree normals, Some other too.

Tree normals can be fixed by config, I done it meanwhile. But there are imo a lot more things to do...

 

[Rainmaker87]

No perfect but more fun:

Spa Petitchamps (Gary Paterson) new AI by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Ideal car for the track:

Lego Hot Rod

As title, hot rod made of Lego. @Rigel is to blame for the model once again, I'm to blame for sticking it in AC.

www.racedepartment.com

EDIT: UPDATE Zolder 1967

v3.4
-corrected models file for the Ludwig6666 road mesh
-added another bumpy road mesh option in extras folder

Zolder 1967 v3.5 by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[Peter Boese]

Hello, I have this big bug in AC. I've pure 0.190 + CSP 0.1.80. All works properly for weeks but today I noticed this bug in some of original kunos tracks like Silverstone, Nurburgring ecc. Please someone tell me how to solve this bug without reinstalling all the game? Thank you so much to all

It is already solved and will be working in future versions of Pure. You can already install this fix for Triplescreen:

Discord - A New Way to Chat with Friends & Communities

Discord is the easiest way to communicate over voice, video, and text. Chat, hang out, and stay close with your friends and communities.

discord.com

 

[chas1723]

O
Ah, I didn't know that, where can I find it?

you cant unless you are in a test group

 

[slider666]

View attachment 1272208View attachment 1272207
i found a bug monaco_1975

I can´t verify that hole. Either by driving the same parts or by 3D model software. What version of this track do you use?
Nevertheless, I worked on some other parts:

Still a lot to do...

 

[xNAPx]

That should be used on a LUA script, if I´m not totally wrong.
To use it in ext_config.ini use for example this:

[SHADER_REPLACEMENT_...]
ACTIVE = 1
DESCRIPTION = change specular shader settings
MATERIALS = material_name_here
PROP_... = ksSpecular, 0.1 ;use proper values here
PROP_... = ksSpecularEXP, 15 ;use proper values here

That is for sun specular on track, what if I want to darken the asphalt

 

[SthrnOldskool]

I can´t verify that hole. Either by driving the same parts or by 3D model software. What version of this track do you use?
Nevertheless, I worked on some other parts:
View attachment 1272287
View attachment 1272286

Still a lot to do...

cars falling through the track was found in creating some NZ tracks recently, and it was found that with csp review 1.80 preview 218 some cars would fall through, while others didnt. The fix that worked for me was as follows, thanks to Gzerod

CM>Settings>Custom Shaders Patch>General Patch Settings>Physics Tweaks>Raycasting engine: change from Intel Embree back to ODE.

I also tick 'Disable for deep collisions' and 'Limit amount of cantacts', though they don't seem to be involved with the problem.

It was also found by Rainmaker that the object (part of the track the car fell through) was double sided.

 

[Fullnoise]

Hello i have 2 question

1 how can I manipulate backfire sound with the car physics? Fmod has a backfire event but in game i don't hear any, so something must trigger it


2 How can I swap parts on and off in game ? VRC Formula 2007 has a toggle to enable front fin or make halo disappear. I want to toggle these fins on and off too on the sauber

View attachment 1272201

You can do this via CSP and add a MODEL_REPLACEMENT line in the ext_config.ini to hide those parts for that skin, or if you want to spend more time you can try and make them disappear by adding them as an animated wing in CSP which means editing the aero.ini and setup.ini to have them show up in the setup screen.

 

[MrLonguinha17]

While nobody officially develops the Alfa-Romeo 2300 LM and 2300 MM, I'm making my inventions to have a few more cars on the grids of the 30's (to partner with Bentley and Mercedes by Legion).

The biggest problems are the "maps" of the added pieces that are overlapping the original ones, that's why (mainly the skin of "Nuvolari/Sommer de 1931 (number 11)" was strange, but I have nothing to do.

The others were close the real ones ( more or less ) I tried to make two versions of the Alfas: 2300MM ( more elongated front wheel protection, as well as the longer rear one) and 2300MM , slightly shorter rear and front protection too ). The first tests on tracks (after the necessary modifications in the "DATA" folder) were satisfactory.

I have to compare with real times on some track. From what I researched, they reached the maximum speed (close to 185km/h), I used the gear ratios and the differential (from an old collection that I have) that comments on several important cars (in the world of racing).

 

[kakauiyt]

You can do this via CSP and add a MODEL_REPLACEMENT line in the ext_config.ini to hide those parts for that skin, or if you want to spend more time you can try and make them disappear by adding them as an animated wing in CSP which means editing the aero.ini and setup.ini to have them show up in the setup screen.

I know about model replacement, but I need to replace it with something. I guess i can always replace it with a 0.001 sized object so that "nothing" appears.

And for animated wing what do I need to animate to make it dissappear ? Like I know how to animate (I already animated wing flexing) but dunno what to do to make it dissappear in animation. Change size ? make it go underground?

 

[Den_88]

cars falling through the track was found in creating some NZ tracks recently, and it was found that with csp review 1.80 preview 218 some cars would fall through, while others didnt. The fix that worked for me was as follows, thanks to Gzerod

It was also by found Rainmaker that the object (part of the track the car fell through) was double sided.

Indeed, switching the mode to ODE solved the problem.

 

[d0ntashi]

Tashi's Car Data Reference Center 0.3 (Nihon Update)
^ This is a link ^

WOO BOY HOW DID I FORGOT ABOUT THE JAPANESE BRANDS, because I did, but here it is. Nissan, Honda and Subaru are the new entries here, with Toyota getting three models.

More Data (general)

• Added CarProg 2 - Site containing manuals & diagrams for select VAG brands
• Added Subaru FSM - Site containing various FSM for US/EU Subaru vehicles

Specific data

• Added manufacturer Honda
• Added 1988 Honda CRX
• Added 1988-1995 Honda del sol
• Added 1988-1990 Honda Civic

• Added manufacturer Nissan
• Added 2009, 2011, 2012, 2014 Nissan 370Z
• Added 2007-2014 Nissan GT-R

• Added manufacturer Subaru
• Added Subaru 360 YOUNG S, Sedan, Van, Truck, Custom
• Added 2003-2005 Subaru Baja
• Added 2014, 2015, 2017, 2020 Subaru BRZ + Supplementals
• Added 1997-2020 Subaru Forester

• Added Toyota MR2/MR-S Spyder (ZZW30)
• Added 2009-2014 Toyota Prius (someone requested this)
• Added 2005-2011 Toyota Yaris

As always, feel free to send stuffs in threads and/or DMs if you wanna contribute to the car data repository

 

[Den_88]

I can´t verify that hole. Either by driving the same parts or by 3D model software. What version of this track do you use?
Nevertheless, I worked on some other parts:
View attachment 1272287
View attachment 1272286

Still a lot to do...

Unfortunately the track version is unknown.

unless of course the year of release can be considered a version))))

 

[Fanapryde]

Unfortunately the track version is unknown.

View attachment 1272359
unless of course the year of release can be considered a version))))

Version is what Legion uses: dated 27 April 2020...

 

[andrevr]

Unfortunately the track version is unknown.

View attachment 1272359
unless of course the year of release can be considered a version))))

That is exactly what it is. That's how @GzeroD (Legion) "versions" his mods.

Edit: Daggnabbit, Fana

 

[Den_88]

That is exactly what it is. That's how @GzeroD (Legion) "versions" his mods.

Edit: Daggnabbit, Fana

let's not include "Captain Obvious", ok?
It's just that such things should appear correctly and not as someone pleases.

 

[Fanapryde]

let's not include "Captain Obvious", ok?
It's just that such things should appear correctly and not as someone pleases.

You seem to fairly new...
Lots of modders don't even care to put version numbers, or forget to update them, or start with v1.0 what should really be v0.1 etc...
If you consider a version date as being not 'correctly', how would you consider the above then ?