Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 154,858 comments
  • 48,732,112 views
The next skin is coming

preview.jpg
 
Hey all, I've been looking around and I'm wondering if anyone still has Legion's Lola T70 Mk3b, been wanting to give it a go but it doesn't seem to be on his site now.

EDIT: Never mind.
 
Last edited:
RMi_wood
you actually did it right

STEER_ASSIST=
this is for increasing FFB due to downforce, and rarely should be under 1.0
For the highest downforce cars one might set that at 0.90 and even that is quite extreme (and 0.50 is simply rediculous)
Click to expand...
Is this for the In-Game menu or for the car's "car.ini"? Thanks.
 
MrHunt
I've been trying around for 2 days with CSP Preview, I almost wanted to give up, then I discovered all the settings I had forgotten, tone mapping etc. in settings.

The result is very good for me and only the Kunos preview angle comes into question. Just a little steering wheel angle and without this blue film and kind of fog was my first version and my second and newest is because of csp previews.
The little car collector perfectionist must have a great preview of each of his treasures, otherwise he will get round toenails.

1st picture is Kunos standard
View attachment 1293911
2nd is my Kunos preview from 2022-23
View attachment 1293913
3rd is my newest with CSP Preview
View attachment 1293914
But one thing worries me: if a skin contains an extra kn5 that is inserted via csp, then no preview works for me! Can anyone confirm that?

Edit:

After further hours of testing, I have to say that CSP previews are a nice start but not really convincing, there is far too little information and settings, I only use it once to create a preview of a few Encr. Otherwise, leave the car with it. I use csp prev. no longer it is to ugly
Click to expand...
The extra kn5, exxt_config doesn't work in cm preview, which is sad. Seemingly noone bother that so...
It's just a ****** thing because with many cars that contain 5-6 aero styles you have to make a kn5 for each.
 
PGMurphy
and another person pointed out that brake torque was already increased by 400 Nm compared to a lesser model, so, again, this could just be a quirk of this real life car.
Click to expand...
That wasnt "another" person. 😁🤫
PGMurphy
The only other comment is some surprise about how stable the car is; I'd expect it to be more squirrelly in the rear.
Click to expand...
Imho it completely depends how you drive the car, e.g. high refs within a corner or accelerating out of a corner makes it tailhappy.

For example, I'm used to test my own cars at Mugello for different reasons. First time I did a test run with this one I drove all the way from turn 6 to turn 10 in third gear, fighting the car in every corner. After switching to fourth gear there was still a lill bit of fighting, but it felt way more comfortable ... and was half a second faster in the end.
 
RMi_wood
you actually did it right

STEER_ASSIST=
this is for increasing FFB due to downforce, and rarely should be under 1.0
For the highest downforce cars one might set that at 0.90 and even that is quite extreme (and 0.50 is simply rediculous)
Click to expand...
I always set the FFMULT to 1.0 and then STEER_ASSIST as RMi_wood suggested anywhere between 0.5 and 0.9, with high downforce cars at 0.55 or above. In addition I always have STEER_ASSIST adjustable to car setup.
It will depend on your wheel setup but should be right with anything equal to or better than a Thrustmaster TS-PC.
Also depends if you run with damages on and how much you want to feel through the wheel such as flat spotted tyres etc.
 
DiemPerdidi
There is a Pedralbes for AC...
Click to expand...
If is the same version I have (that I keep for sentimental reasons), I'm sorry to say that needs a lot of TLC to achieve somewhat of today standards...
Paulo Ribeiro
Deleted, because I don't want to flame any wise/funny guy.
Click to expand...
There have been cases of wisefunny guys who have spontaneously self-combusted, without need of external heat inputs...
 
Last edited:
sab001
All 4 skins (doh) are now updated. The molexs (all!) were previously gnarled, and the driver name spacing on the #14daytona was irritating me. (UPDATED again @ 12:28pdt) I'm done :)

View attachment 1293804
Click to expand...

THX for the skins. Seems that the car has not much support from skin makers. The Lexus logos for the skins of #14 are much better then the ones for #12. Can you adjust that please? :)
 
demankz
2023 Anest Iwata Racing with Arnage #50

Download
View attachment 1293967

2023 Blanchet Motorsports #84

Download
View attachment 1293970
Click to expand...
It would be useful to know for which car version the skins are made for. You do realize that there are several versions around with skins that are not interchangeable ?

EDIT: I noticed that you provided a install tree where the file name of the car is included, so all good.
 
Last edited:
Perico Lospa
If is the same version I have (that I keep for sentimental reasons), I'm sorry to say that needs a lot of TLC to achieve somewhat of today standards...
Click to expand...
Oh, that's a shame. v1.0 was only released last year (apparently) so I assumed it would be up to snuff. There's an extension folder and a VAO patch and everything...
 
Rainmaker87
THX for the skins. Seems that the car has not much support from skin makers. The Lexus logos for the skins of #14 are much better then the ones for #12. Can you adjust that please? :)
Click to expand...
Copy the HR_Badge and HR_Badge_NM files from the #14 skin folder to the #12 skins folders.

Got another ai question and don't laugh if it's stupid. If I add ballast to an ai car in the CM detailed grid settings, will it make that ai car sit lower because of the added weight? Or is it just an arbitrary number that doesn't actually impact the car's physical state other than to slow it down.
 
Last edited:
racinjoe013
Thanks for the 'real' skins. Do you plan to do the same to the other skins by any chance? Kind of surprised that I haven't seen any skins for this car popup anywhere except for these ones. Most of the time RSS releases a car, skins come pretty quickly.
Click to expand...
I'm good for one set of skins for each new car... If one of the RSS skins is close to the real livery that's my usual starting point. The Vasser-Sullivan was a no brainer... I've not seen the RCF in any other series that I follow, but I see we have some SuperGT skins now.

[...THX for the skins. Seems that the car has not much support from skin makers. The Lexus logos for the skins of #14 are much better then the ones for #12. Can you adjust that please? :) ]

What RacingJoe said... I will copy that file across now for subsequent dls.
 
Last edited:
racinjoe013
Copy the HR_Badge and HR_Badge_NM files from the #14 skin folder to the #12 skins folders.

Got another ai question and don't laugh if it's stupid. If I add ballast to an ai car in the CM detailed grid settings, will it make that ai car sit lower because of the added weight? Or is it just an arbitrary number that doesn't actually impact the car's physical state other than to slow it down.
Click to expand...
I have a Group C grid were I had to add 850 kg to a car and it does not touch the ground, so in my experience it's only a calculation thing for BOP.
@sab001 got it!
 
Last edited:
maximeerkat
there is no inside joke.

a simple "hi guys i am new here and want to ask a question" would do

if you walk up to a group of people who you did not know at all and just started asking them questions they would look at you like you are rude and socially inept........see my point?
Click to expand...
What on earth are you on about? My question was directed at one person. There was nothing rude about my question.
 
Fredeliciousx
What on earth are you on about? My question was directed at one person. There was nothing rude about my question.
Click to expand...
was it? how the hell is anyone meant to no it was directed at 1 person? you absolute tool.

you come on a public forum and say the following:

"Are these available for download?"


tell me the person that message is directed to.........

oh no i get it now, we all have crystal ball's and are mind readers........right?


and if your on about the person you tagged...........i would suggest if you want to ask 1 person a question that is what DM's are for
 
Last edited:
Fredeliciousx
What on earth are you on about? My question was directed at one person. There was nothing rude about my question.
Click to expand...
it was your very first post in this forum thread, and it was not a PM to 1 person ... everyone here reads your question and
this is what all of us saw:
1696965241164.png


So then some of us dare to say what most think: it comes accross as a tad rude to not even say "Hi" on your very first post, and just burst in with only a question.
 
demankz
Hi I am using this mod lexus rcf gt3 acc
the mod folder is called lexus_rcf_gt3_acc

I downloaded the mod from this site
https://assettocorsamods.io/cars/race/lexus_rc_f_gt3_acc/

View attachment 1294071
Click to expand...
Glad to see Elements cleaned up the Multiple Blancpain number-boards which used to ugly-up this car. 2023 Super GT skins are very welcome. Thanks!
JK1977
Fuji 1000Km Skin done
View attachment 1294133
Click to expand...
This looks SOOO much better than the one that was floating around previously. Great job.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
1K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
4
Views
2K
Terronium-12
Terronium-12
Famine
Assetto Corsa EVO Early Access Discussion Thread
40 41 42
Replies
1K
Views
255K
Nacho Libre
Nacho Libre
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
6 7 8
Replies
222
Views
37K
warp9engage
warp9engage
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
19K
Cote Dazur
Cote Dazur

Latest Posts

Back