Assetto Corsa PC Mods General DiscussionPC

[Pfalzdriver]

Disable blur in car params.

Had to do this myself taking the screenshot in my last post too. No clue why its enabled and if there is a settings to disable it.

I'm not denying there is maybe a problem, but I cant reproduce it. And imho there are no weird settings related to glass materials:

Again, I'll surely fix it but currently I dont understand what is causing this at some systems.

 

[DaWallace]

Disable blur in car params.

Had to do this myself taking the screenshot in my last post too. No clue why its enabled and if there is a settings to disable it.

I'm not denying there is maybe a problem, but I cant reproduce it. And imho there are no weird settings related to glass materials:

View attachment 1301339

Again, I'll surely fix it but currently I dont understand what is causing this at some systems.

The rim blur is a kseditor thing. Sometimes if you load your fbx, ksEditor turned "on" the rimblur automaticaly. You need to double check if the rim blur is turned off in kseditor before export as kn5. I had this couple of times and was wondering why rimblur is always shown in showroom. So i double check this everytime, if its turned off before export.

 

[Pfalzdriver]

Same thing came to my mind too, Marcel. But thanks for clarifying this.

 

[Hiro77taka]

Can someone make a Jaguar xjr11 OR 12 mod?

I wonder if you can make a sprint specification instead of the Jaguar xjr9 LM

 

[Evanstanislas]

For those who haven't seen:



Fenryr has released a Bahrain International Circuit. Patrons only for now in its beta state, but will be free for all in a week or two.

Considering his use of laser scan data in each of his previous projects, I wonder if this is finally the RFactor 2 laser scan conversion many have been clamoring for. I'd say it's probable.

I am aware many are critical of him in here (including myself, doing so very harshly on his substandard COTA release that has since been largely fixed), but Bahrain is one of the huge holes in AC - I've tried all of them available and frankly none are good enough. Hopefully with some extra work, this becomes the definitive version.

even his 1.2 is still a problem, when I enabled the sparse grid it makes the grid can't start on the race.

P.S that track is the only 1 that has the problem

 

[shi]

Atlantic Motorsport Park v1.01

Atlantic Motorsport Park | shin956

Get more from shin956 on Patreon

www.patreon.com

Atlantic Motorsport Park (AMP) is an all-purpose motorsports facility located near Shubenacadie, Nova Scotia. The 11-turn road course was opened in August, 1974, and is situated on a 116.56-hectare (1.2 km2) site. (Wikipedia)
Conversion from GTL.

View attachment 1300260
-CSP recommended
-24 pit/start
-AI, cam

Credits & Thanks;
GTL Original Track by maeckie
-Thank you for giving me permission

AC Converted by @shi (shin956)
JPS billboard texture by @Breathe
logo.png and sections file by @Fanapryde
Crowds texture by @Kniker97
marshall and some textures by kunos
Test and Feedback by @Masscot , @Breathe , @macko68

Download (mediafire)

Enjoy.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;

-Fixed a problem with floating visual road surfaces in pit lane.
-The number of pit/start was increased to 24.

Atlantic Motorsport Park v1.01
The link is in the quote.

v1.01 changelog;
-Fixed a problem with floating visual road surfaces in pit lane.
-The number of pit/start was increased to 24.

Pasargada Autodrome v1.1

https://www.patreon.com/posts/pasargada-72626361

View attachment 1196212
Fictional circuit in Brazil.
Conversion from Grand Prix 4.

-CSP recommended
-30 pit/start
-AI, cam

Credits & Thanks;
Original Track by Gildoorf Rozencrantz, Jimbob, Lo2k, Fongu, Ruboy Ricardo Lampert
-Thank you for gave me permission (Gildoorf)

AC Converted by @shi (shin956)
.lua and font by @gunnar333
logo.png by @Fanapryde
some objects and textures by kunos
Test and Feedback by @Fanapryde , @slider666 , @Breathe , @Masscot

Download (mediafire)

Enjoy.

Patreon-only track requests are now being accepted.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.1 changelog;

Added 3D terrain.
Fixed floating objects.
Fixed treewall mapping.
Tweaked textures.
Updated ext_config.ini.
Changed crowd textures by Kniker97. (Thanks)
Other minor fixes.

Pasargada Autodrome v1.1
The link is in the quote.

v1.1 changelog;
Added 3D terrain.
Fixed floating objects.
Fixed treewall mapping.
Tweaked textures.
Updated ext_config.ini.
Changed crowd textures by @Kniker97 . (Thanks)
Other minor fixes.

 

[Zwiss]

Now that Croft and Crystal Palace have been updated, I'm finally going to try to finish my scratch build Nivelles-Baulers 1974.
Not the most challenging of tracks, but host to F1 in 1972 and 1974. Emerson won twice.
Another track that has been totally demolished, although I once drove around the closed but still complete track in 1993.

 

[Junshen Wu]

Yas Marina Circuit 2021 mod v2.0, made by BAI Zhantang and so on.
·Model by BAI Zhantang and me, road mesh is converted from rfactor 1 and fix by me, other model files are copied from acu_yasmarina.
·Most of texture UV and lightfx are remade by ZHU Wushuang.
·Ai, real TV camera replay , rainfx and grassfx are made by GUO Furong.
Many thanks for the sponsorship of Tongfu Inn(Xi'an city, Shaanxi province, China), hoping you a great journey to Shaanxi someday, welcome to our inn.
View attachment 1301025
View attachment 1301026
View attachment 1301027
View attachment 1301029
View attachment 1301030
View attachment 1301033
Link:https://mega.nz/file/D1h1SKwC#lLhnLX3BNyrW1nDZNSm10rxMx7YQ-lQvIsiSILpXsWo（Fix some lights, add the Pit camera）
CSP 1.78 or higher is needed.

Fix some lights, add the Pit camera,Link:https://mega.nz/file/D1h1SKwC#lLhnLX3BNyrW1nDZNSm10rxMx7YQ-lQvIsiSILpXsWo

 

[pk3r72owns]

RELEASE

Circuit Thermalito 2023

Welcome to Circuit Thermalito. Release Trailer About the Track Circuit Thermalito is a 5.035km fictional temporary race track based on a real life location, using the actual roads surrounding the Thermalito Dam in Oroville, California...

www.racedepartment.com

Circuit Thermalito 2023

Circuit Thermalito is a 5.035km fictional temporary race track based on a real life location, using the actual roads surrounding the Thermalito Dam in Oroville, California. Winding its way between the walls along the water's edge, and through two tunnels in the dam itself, Circuit Thermalito features high speed elevation changes, sweeping banked corners and slow speed technical sections which all come together to create an incredibly challenging, yet hugely rewarding, driving experience.

Originally made by DDF Racer using limited satellite data 15 years ago for rFactor, Circuit Thermalito has been completely rebuilt from scratch to modern standards in stunning detail by Nukedrop. Crowdfunded on Kickstarter by the DDF Racer YouTube community and using hi resolution laser scan data, drone footage and countless photographs of the area, Circuit Thermalito is now available to download for free for Assetto Corsa.

https://www.youtube.com/@DDFRacer

 

[VR Sim Racer]

@Pfalzdriver

Finally got to try the latest version. Anyone else have the same issues?

The boost gauge not going past 1.0, it looks like it should go to 1.4, so I changed the STEP to 188.5 in the analogue instruments ini.
Is this right?

The sublime ffb I had on the last version has been replaced with a huge centring force but that may be the way I have my ffb set up. Gyro or smg? Anyway I played with the FFMultiplier and Steer Assist settings in the car.ini and got the feel back.

But the biggest trouble I have is the tyres lose temps immediately, I pull away with pre-heated tyres and within 10m they have gone deathly cold. Also my tyre wear indicators are red even with no tyre wear at all.

 

[Pfalzdriver]

The boost gauge not going past 1.0, it looks like it should go to 1.4, so I changed the STEP to 188.5 in the analogue instruments ini.
Is this right?

Nope. 😁
Default boost pressure is at 70%, which is ~1bar. Either increase the pressure in setup or adjust it while driving to 100%, which is 1.4bar. Works fine on my side. But as I can see all day long, many things working on my side dont work globally.

The sublime ffb I had on the last version has been replaced with a huge centring force but that may be the way I have my ffb set up. Gyro or smg? Anyway I played with the FFMultiplier and Steer Assist settings in the car.ini and got the feel back.

FFB wasnt touched since v1.3, but I've made some minor changes to the suspension.

Well, would be always helpful to post your changes, so I could test them myself and maybe implement them, if I think they work with my wheel too.

But the biggest trouble I have is the tyres lose temps immediately, I pull away with pre-heated tyres and within 10m they have gone deathly cold. Also my tyre wear indicators are red even with no tyre wear at all.

Those are the tire physics by Arch, which are imho pretty much like its in reality. Even preheated tires never have the temperature they need on track. So you'll need to drive a couple of corners until they are within their window. Whenever I test at the Nords my grip indicator is at max after I'm out of the section Hatzenbach.

 

[Fanapryde]

RELEASE

Circuit Thermalito 2023

Welcome to Circuit Thermalito. Release Trailer About the Track Circuit Thermalito is a 5.035km fictional temporary race track based on a real life location, using the actual roads surrounding the Thermalito Dam in Oroville, California...

www.racedepartment.com

Circuit Thermalito 2023

Circuit Thermalito is a 5.035km fictional temporary race track based on a real life location, using the actual roads surrounding the Thermalito Dam in Oroville, California. Winding its way between the walls along the water's edge, and through two tunnels in the dam itself, Circuit Thermalito features high speed elevation changes, sweeping banked corners and slow speed technical sections which all come together to create an incredibly challenging, yet hugely rewarding, driving experience.

Originally made by DDF Racer using limited satellite data 15 years ago for rFactor, Circuit Thermalito has been completely rebuilt from scratch to modern standards in stunning detail by Nukedrop. Crowdfunded on Kickstarter by the DDF Racer YouTube community and using hi resolution laser scan data, drone footage and countless photographs of the area, Circuit Thermalito is now available to download for free for Assetto Corsa.

https://www.youtube.com/@DDFRacer

View attachment 1301379
View attachment 1301380


View attachment 1301374View attachment 1301376View attachment 1301377View attachment 1301375

Faster release than I expected, so here's the sections file and track logo:

 

[Fanapryde]

Fix some lights, add the Pit camera,Link:https://mega.nz/file/D1h1SKwC#lLhnLX3BNyrW1nDZNSm10rxMx7YQ-lQvIsiSILpXsWo

Looking very nice now. I have a bit of flickering on distant Pirelli ad boards, but I've seen worse.
Night lights are fine on my system, hotel roof lights are OK now, they were nuclear in the previous version.
Thanks.

 

[Daniel Graf]

Hi guys,

I need your help for my next Porsche 964 RSR 3.8 skin. Rohr competed in the 1995 Daytona 24H race with #02. I have a very good side shot of the car, but no photos showing the front, rear or top. Maybe somebody has a scale model or some photos showing the car.

Main sponsors are: Aggreko and Maxcom
Drivers: Johannes Huber (A)/Lloyd Hawkins (USA)/Andreas Knapp-Voith (D)/Niki Siokola (A)
Result: 11th

Maybe there is a shot in the 1995 Porsche Sport Yearbook, which I sadly do not own :-(

Thank you for your help :-)

 

[mmoerzin]

Maybe someone has a good replay cam for Simtraxx Gestel (no camtool)

 

[graveltrap]

But the biggest trouble I have is the tyres lose temps immediately, I pull away with pre-heated tyres and within 10m they have gone deathly cold. Also my tyre wear indicators are red even with no tyre wear at all.

This car looks to be using the CSP thermal model so the temps may not be reported correctly by the Kunos tyres app, try this one

 

[Haunebu52]

Hey everyone, quick question. Does anyone know if it’s possible to remove meshes from a track using ext_config.ini? I know you can hide them, they are invisible but you can still collide with them. I want to remove them so they aren’t visible and have no collision. Is that possible? Thank you!

 

[racinjoe013]

Hey everyone, quick question. Does anyone know if it’s possible to remove meshes from a track using ext_config.ini? I know you can hide them, they are invisible but you can still collide with them. I want to remove them so they aren’t visible and have no collision. Is that possible? Thank you!

Not sure how you tried it, but try this.

[MESH_ADJUSTMENT_...]
ACTIVE=1
DESCRIPTION=
MESHES = MESHNAME
IS_RENDERABLE=0

 

[ganzlinger]

ACTK Trucks Racing v1.5
Fixed light inside and outside (Thanks @TaistoTurri)
Add animation Wipers
Extended physics for rain integrated in data.acd
CSP required
Download http://www.assetto-fr.tk/ in public section

Does anyone have these? I know I can get these trucks in the gravelassetto site, but the ones I downloaded there don't have working wipers.

 

[DavidDGA]

Hi guys,

I need your help for my next Porsche 964 RSR 3.8 skin. Rohr competed in the 1995 Daytona 24H race with #02. I have a very good side shot of the car, but no photos showing the front, rear or top. Maybe somebody has a scale model or some photos showing the car.

Main sponsors are: Aggreko and Maxcom
Drivers: Johannes Huber (A)/Lloyd Hawkins (USA)/Andreas Knapp-Voith (D)/Niki Siokola (A)
Result: 11th

Maybe there is a shot in the 1995 Porsche Sport Yearbook, which I sadly do not own :-(

Thank you for your help :-)

This one?

 

[TabsGaming42]

Sadly, this is the end of the GTE era.. I'm so sad..
Thanks GTE for this 12 years of pure racing, for the amazing sound, this great battles.. Thanks for everything.

To close this era, I made the last update, the final version of my Ferrari 488 GTE Evo !

There is the link, https://www.patreon.com/posts/78115586 !

Have fun on the track !

 

[Haunebu52]

Not sure how you tried it, but try this.

[MESH_ADJUSTMENT_...]
ACTIVE=1
DESCRIPTION=
MESHES = MESHNAME
IS_RENDERABLE=0

Yes, this is how I've been doing it, and that makes the mesh invisible but still has collision properties. For example, if I use this mesh adjustment for a wall, it will be invisible but the mesh is still physically there. Thank you for your reply!

 

[racinjoe013]

Yes, this is how I've been doing it, and that makes the mesh invisible but still has collision properties. For example, if I use this mesh adjustment for a wall, it will be invisible but the mesh is still physically there. Thank you for your reply!

Ok, then you could try this. Might do the same thing, but worth a shot.

[MODEL_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION =
HIDE = MESHNAME
FILE = trackfilename.kn5

 

[VR Sim Racer]

Nope. 😁
Default boost pressure is at 70%, which is ~1bar. Either increase the pressure in setup or adjust it while driving to 100%, which is 1.4bar. Works fine on my side. But as I can see all day long, many things working on my side dont work globally.

Thanks, the last version I had (1.3??) didn't have a Turbo setting so that explains that.

FFB wasnt touched since v1.3, but I've made some minor changes to the suspension.

Well, would be always helpful to post your changes, so I could test them myself and maybe implement them, if I think they work with my wheel too.

My bad on this one, I was testing on Targa Florio mod track and I have had this weird ffb problem before (with RMI_Wood's updated Alfa Tipo 33). I just tried it on the Nords and it feels totally different in a good way.

The tyres are still a mystery, or maybe the AC Tyre app is. The wear indicators start off red and the tyres colours go from green to dark blue in seconds although the rear core and surface temps haven't changed.

Those are the tire physics by Arch, which are imho pretty much like its in reality. Even preheated tires never have the temperature they need on track. So you'll need to drive a couple of corners until they are within their window. Whenever I test at the Nords my grip indicator is at max after I'm out of the section Hatzenbach

 

[VR Sim Racer]

This car looks to be using the CSP thermal model so the temps may not be reported correctly by the Kunos tyres app, try this one

Cheers, that answers my confusion. 👍

 

[Quark67]

Haunebu52

Also try editing surfaces.ini

add a section for the collidable invisible wall mesh

[SURFACE_yy] ;yy is the last number +1
KEY=xxxx ;xxxx is the name mesh (only CAPITAL letters)
....
IS_VALID_TRACK=1

 

[Haunebu52]

Ok, then you could try this. Might do the same thing, but worth a shot.

[MODEL_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION =
HIDE = MESHNAME
FILE = trackfilename.kn5

Thank you, I have tried this also to the same result... and I'm pretty sure the issue is there is a 1WALL physical barrier that is invisible. I believe I am hiding the visible mesh, but not the physical one and that's likely the issue. I'm not sure how to disable those with only ext_config.ini.

 

[strato86]

Hi, I'm who shared "his first mod" a while ago, now I was working on editing a track (basic things like skins and trees) but I found cloned buildings (that is, if I change a skin, all the buildings change) I had an earlier version of this track where the buildings were separate/distinct. I wanted to know if it is relatively easy to 1-take those buildings from the previous version, 2-delete the duplicates from the new version and 3-put those buildings so that their skins are easily editable.

If it was "easy" I wanted to know what program or programs I should use and if you recommend any basic video tutorial, preferably predictive or in Spanish, since the text translations are not precise (I'm practically looking for a video for +6 years 😅)
Regards.

 

[Daniel Graf]

This one?

exactly this one :-)
Thanx a lot.

 

[Haunebu52]

Haunebu52

Also try editing surfaces.ini

add a section for the collidable invisible wall mesh

[SURFACE_yy] ;yy is the last number +1
KEY=xxxx ;xxxx is the name mesh (only CAPITAL letters)
....
IS_VALID_TRACK=1

This helped another issue I was having, so thank you for posting this, I didn't even consider this option.

The issue is the 1WALL physical object, but if I disable it, collisions with other walls are janky so I will just leave the invisible walls for the time being. Thank you all for you help!