Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 151,998 comments
  • 46,468,725 views
Hello,

Has anyone encountered this issue with SPA track and managed to resolve it? I've reinstalled SPA 2022 (on Kunos track) and the Pyyer configurations, but the problem persists...

Capture d'écran 2024-04-21 083136.png


Edit : it is the following option from CSP causing the troubles :
1713682847195.png


Thank you
 
Last edited:
Fumblefap
Hey, what does everybody think about the 3D trees from CSP? I like them especially if a track's 2D trees aren't very good, but I feel like opinions might be mixed.
Click to expand...
We already had that discussion here and if being good than it's ok, but same is counting for the perfect 2D trees, or putting the lesser quality 2D stuff further away from the track. Only I'm afraid for an older or low spec rigs it's a step to much, or reading the comments here some prefer an nostalgic 2D view.
Maybe that also explains the power of AC, there is so much different specific genres, feel free to use what you like the most. Even it is riding a banana on tracks with only 3D or 2D trees, why not.
 
Last edited:
Danbowlghini
I'm late in posting here, but once again...

The legendary car is finally back! !
Isdera Commendatore 112i BETA test has started！

Since the car has many unique gimmicks, I also created an engine compartment. Please enjoy the first BETA version!
I have already received a lot of feedback, and I will make it even better in the next update!

www.patreon.com

The legendary Isdera Commendatore 112i begins BETA testing!! | Danbowlghini Modding Project

Get more from Danbowlghini Modding Project on Patreon
www.patreon.com www.patreon.com
View attachment 1346149View attachment 1346150View attachment 1346151View attachment 1346152View attachment 1346153View attachment 1346154View attachment 1346155View attachment 1346156View attachment 1346157
Click to expand...
which track is it?
 
sbmagnin
Hello,

Has anyone encountered this issue with SPA track and managed to resolve it? I've reinstalled SPA 2022 (on Kunos track) and the Pyyer configurations, but the problem persists...

View attachment 1348670

Edit : it is the following option from CSP causing the troubles :
View attachment 1348680

Thank you
Click to expand...

Pyyer has updated some of his extensions. Have you installed the latest version for Spa?
 
Last edited:
Masscot
Rubbing wormy wet dog turds into your eyes is a great way to simulate the joy of 3D trees without the inconvenience of turning your PC on.
Click to expand...
There are worse ways to spend a weekend, I suppose! XD

I'm honestly surprised to see that the majority opinion is generally negative! I think 3D trees look pretty good, especially for trees that are close to the race track and for certain types of trees (2D palms always look so bad).

Here's another thing I've been trying out. Has anybody been using AI upscaling for logos you can't get in a high enough resolution? I've been using this website to do it, although I wouldn't be surprised if it's built into the Adobe suite somewhere at this point. It's not perfect, but the results are nevertheless quite impressive:

sticker-sodemo.png

sticker-sodemo(1).png


ts62e61566289379.png

ts62e61566289379(1).png
 
Last edited:
shi
Dunas 1981 v1.01
www.patreon.com

Dunas 1981 | shin956

Get more from shin956 on Patreon
www.patreon.com www.patreon.com
View attachment 1337319
Fictional circuit.
Conversion from RACE07.

-CSP recommended
-25 pit/start
-AI, cam

Note;
Trees were not included in the original track.
If you want to restore the original look,
delete the dunas_1981_tree.kn5 entry from models.ini.

Credits & Thanks;
Original rFactor Track by entrevias
-Thanks for creating this track and making it freeware.
RACE07 Converted by Sergio Hundo
-Thank you for giving me permission

AC Converted by @shi (shin956)
fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE
ai_hints.ini by IMEAN
logo.png by @Fanapryde
.lua and font base by @gunnar333
Crowds texture by @Kniker97
trees, marshall, cameraman and some textures by kunos
Test and Feedback by @Masscot , @Fanapryde

Download (mediafire)

Enjoy.

v1.01 changelog;

-New fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE. (Thanks!)
-ai_hints.ini by IMEAN. (Thanks!)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

Wellington 500 v1.2
www.gtplanet.net

Assetto Corsa PC Mods General Discussion

Quick fix: Unpack data using Content Manager Open drivetrain.ini file in the data folder Change line 63 to DOWN=3700 (from DOWN=4700) Save file Pack data Works like a charm! Thank you!
www.gtplanet.net www.gtplanet.net

v1.2 changelog;
Updated fast_lane.ai and sidelines.
Deleted ai_hints.ini.
Fixed holes in the road surface. (Thanks Josuracer for the report.)
Click to expand...

Dunas 1981 v1.01
The link is in the quote.

v1.01 changelog;
-New fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE. (Thanks!)
-ai_hints.ini by IMEAN. (Thanks!)
 
Last edited:
kakauiyt
that's because KSeditor thinks he knows best and will force the texture associated to the material the object had based on what's written in the .ini file. So you need to locate the part in the ini file associated to your object/material, and remove that part from the ini

It is very irritating when things like that happens, out of rage I just delete the entire ini and redo everything from kseditor for all materials sometime
Click to expand...
I see my actual problem is when I export to FBX that particular material is not registering in the FBX file. So KSeditor is randomly assigning it its own material. So I can't see how to assign a material to the object in the config file, only the existing materials. Very annoying.
 
Whenever I do a race, the cars that go off and out are rejoining from the pits, despite the box isn't marked in New ai behaviour... Maybe because of CSP version?
How do I fix it?
 
Fumblefap
There are worse ways to spend a weekend, I suppose! XD

I'm honestly surprised to see that the majority opinion is generally negative! I think 3D trees look pretty good, especially for trees that are close to the race track and for certain types of trees (2D palms always look so bad).
Click to expand...
Maybe it's a VR issue or something, but nine times out of ten 3D trees look like cel-shaded houseplants, or giant cabbages. The lighting/saturation/contrast is often overblown and doesn't fit the rest of the environment at all.
TLDR: wormy turds.
 
Last edited:
Ferrari 308 GTB Group 4(v1.0) by F40 LM Lover & VerdesGarage

It is Required CSP 2.3 Preview1 or over.

1. 3d Model
1) Base model from Gran Turismo 7
2) Many parts are made by myself.

2. Sound by hillclimber12

3. Extra Function Keys
- EXTRA A : Left Door Open/Close
- EXTRA B : Right Door Open/Close
- EXTRA C : Motor Hood Open/Close
- EXTRA D : Engine Start/Stop
- EXTRA E : Extra Fog Lights On/Off
- EXTRA F : Fog Lights On/Off

4. Visual Options in set-up
- Extra Fog Lights can be disabled/enabled
- Co-Driver can be disabled/enabled
- Mud Flaps can be disabled/Enabled
- Tyre Shapes and textures can be changed(Tarmac/Gravel/Snow) with Certain physics.

5. Physics by VerdesGarage who is one of the best rally car modder
- Two types of Engine MAP(Standard/QV), You can set it up in Fuel tab of Set-Up
- He made three setups(Tarmac/Gravel/Snow), "Look in the description of the car in CM and you will see the links,
copy-paste in google to install"
. Gravel Setup : https://acstuff.ru/s/QCYmAk
. Snow Setup : https://acstuff.ru/s/WPuMMm
. Tarmac Setup : https://acstuff.ru/s/KnfKLh

6. Tyres textures and CO-Driver's Pace Note mesh by VerdesGarage & iku

7. Rally Driver by Frito (ZFLB)

 
Masscot
Maybe it's a VR issue or something, but nine times out of ten 3D trees look like cel-shaded houseplants, or giant cabbages. The lighting/saturation/contrast is often overblown and doesn't fit the rest of the environment at all.
TLDR: wormy turds.
Click to expand...
It’s not only VR, I can assure you.
3D trees are in 99% of the cases horrible looking on triples too.
I do have a couple of tracks where the modder did a really good job in choosing the right kind of trees, fitting the real environment, using the right shaders, no popping, still looking OK in stronger winds and in wet night conditions, and all that without affecting FPS too much. But it is very rare…
 
Young78
Ferrari 308 GTB Group 4(v1.0) by F40 LM Lover & VerdesGarage

It is Required CSP 2.3 Preview1 or over.

1. 3d Model
1) Base model from Gran Turismo 7
2) Many parts are made by myself.

2. Sound by hillclimber12

3. Extra Function Keys
- EXTRA A : Left Door Open/Close
- EXTRA B : Right Door Open/Close
- EXTRA C : Motor Hood Open/Close
- EXTRA D : Engine Start/Stop
- EXTRA E : Extra Fog Lights On/Off
- EXTRA F : Fog Lights On/Off

4. Visual Options in set-up
- Extra Fog Lights can be disabled/enabled
- Co-Driver can be disabled/enabled
- Mud Flaps can be disabled/Enabled
- Tyre Shapes and textures can be changed(Tarmac/Gravel/Snow) with Certain physics.

5. Physics by VerdesGarage who is one of the best rally car modder
- Two types of Engine MAP(Standard/QV), You can set it up in Fuel tab of Set-Up
- He made three setups(Tarmac/Gravel/Snow), "Look in the description of the car in CM and you will see the links,
copy-paste in google to install"
. Gravel Setup : https://acstuff.ru/s/QCYmAk
. Snow Setup : https://acstuff.ru/s/WPuMMm
. Tarmac Setup : https://acstuff.ru/s/KnfKLh

6. Tyres textures and CO-Driver's Pace Note mesh by VerdesGarage & iku

7. Rally Driver by Frito (ZFLB)

Click to expand...

I love you man, thank you so much!

JK1977
View attachment 1348463View attachment 1348464View attachment 1348465
Click to expand...
What specific model is this? I mean its an Opel Kadett E, no question i grewed up with this car, but what spec?


A Opel Kadett E 4S (1986) ? http://tech-racingcars.wikidot.com/opel-kadett-e-4s
 
Fanapryde
It’s not only VR, I can assure you.
3D trees are in 99% of the cases horrible looking on triples too.
I do have a couple of tracks where the modder did a really good job in choosing the right kind of trees, fitting the real environment, using the right shaders, no popping, still looking OK in stronger winds and in wet night conditions, and all that without affecting FPS too much. But it is very rare…
Click to expand...

Was driving today my custom 1950 F1 championship, on a track with only 2D trees and what I do like, put away those cardboard trees from the track, but hell in my VR headset, these trees were shimmering like Vegas neon light. :crazy:
In my country we say, it doesn't matter bitten by the dog or the cat, both do hurt you.
Just get what you prefer on you system and take the best from the worst.
 
Last edited:
BruceD
I see my actual problem is when I export to FBX that particular material is not registering in the FBX file. So KSeditor is randomly assigning it its own material. So I can't see how to assign a material to the object in the config file, only the existing materials. Very annoying.
Click to expand...
I think you're better off deleting the whole ini file
 
BloodyThunderX
So I recently moved my AC installation to a brand new SSD and lost some of my old settings.
I was able to restore most of them... albeit with one caveat that's actually served to be rather irritating so far.

The rear camera (look behind) placement is suddenly far higher than it used to be.
View attachment 1345536

I use the "BACC - Forza Horizon" Chaser Camera script from RaceDepartment (Overtake) and had been using it prior to the game being moved, and never had this problem before. For context, this is how I have it currently set up when looking in front from third person.

View attachment 1345537

Anyone know how I can fix this? This is present on every vehicle and is not related to the mod shown here.
Click to expand...
I apologize to keep bumping this, but I've been desperately trying to figure out why this has been happening, my installation has never properly been the same since moving the game and re-verifying everything.

Been trying to ask around and I haven't been getting any response. Its something that badly sets off my OCD.

Happens to any vehicle, including Kunos cars.

acs_hGduZ5274I.jpg


acs_7KRDwsh2rP.jpg


Despite my best efforts, I just can't seem to find the fix for it.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
29 30 31
Replies
906
Views
207K
Shah1
S
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
4 5 6
Replies
168
Views
24K
Strittan
Strittan
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
18K
Cote Dazur
Cote Dazur
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
4K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
12K
OH1955
OH1955

Latest Posts

Back